HORIZON EUROPE
Europeo
Specific Challenge:Residual streams from various bio-based operations contain, among others, low-molecular compounds that severely inhibit the growth of the currently known fermenting microorganisms. As a result, the yields and quality of the desired products are too low for a successful, large-scale application of fermentation pathways to valorise these residual streams. To solve these problems, microbes must be adapted to enable the desired conversion steps.
However, there are microorganisms that are resistant to inhibitors and can perform the desired conversion steps in inhibitor-containing streams. Using omics and other techniques to identify and isolate these microorganisms could lead to new systems producing value-added products through fermentation. Their performance may be further improved through metabolic engineering or any other advanced, new biotechnology in this field.
The specific challenge of this topic is to better exploit microorganisms that are resistant to inhibitors.
Scope:Identify, isolate, where applicable engineer, and use inhibitor-resistant microorganisms, and set up the subsequent fermentation processes at lab...
ver más
Specific Challenge:Residual streams from various bio-based operations contain, among others, low-molecular compounds that severely inhibit the growth of the currently known fermenting microorganisms. As a result, the yields and quality of the desired products are too low for a successful, large-scale application of fermentation pathways to valorise these residual streams. To solve these problems, microbes must be adapted to enable the desired conversion steps.
However, there are microorganisms that are resistant to inhibitors and can perform the desired conversion steps in inhibitor-containing streams. Using omics and other techniques to identify and isolate these microorganisms could lead to new systems producing value-added products through fermentation. Their performance may be further improved through metabolic engineering or any other advanced, new biotechnology in this field.
The specific challenge of this topic is to better exploit microorganisms that are resistant to inhibitors.
Scope:Identify, isolate, where applicable engineer, and use inhibitor-resistant microorganisms, and set up the subsequent fermentation processes at lab scale to create added-value products.
This topic includes any operation that uses agriculture-based, forest-based, aquatic/marine-based or bio-waste feedstock to convert it into marketable products. This topic excludes any fossil-based operations and CO2-feedstock. It also excludes any proposal that targets biofuels as the major or sole marketable products.
The scope specifically covers early-stage development proposals, the aim being to lay the groundwork for new technologies converting biomass into added-value products. Several biotechnological approaches may be used that are new or currently not widely used in biorefining operations producing chemicals and materials, including ’omics’, metabolic engineering and synthetic biology.
Proposals should commit to assessing the environmental impacts of the developed processes or products using LCA methodologies based on available standards, certification, accepted and validated approaches (see introduction – section 2.2.5 - published in the BBI JU AWP 2018) 1
Proposals should also include an economic viability performance check (value chain and market analysis) of the developed products and processes, along with an analysis of social impacts where applicable.
If relevant, proposals should also allow for pre- and co-normative research necessary for developing the needed product quality standards.
The technology readiness level (TRL) 2 at the end of the project should be at least 3 for the bio-based value chain in question. Proposals should clearly state the starting TRL, which may be as low as 1 or 2.
The scope aims at assisting industry to further explore promising technologies to broaden and strengthen the bio-based industries in Europe.
Indicative funding:
It is considered that proposals requesting a BBI JU contribution of between EUR 1 million and EUR 2,5 million would allow the specific challenge to be addressed appropriately. However, this does not preclude the submission and selection of proposals requesting other amounts.
To be eligible for participation a consortium must contain at least one constituent entity of the Bio-based Industry Consortium not eligible for JU funding according to Commission Delegated Regulation (EU) No 623/2014.
1 The LCA may focus on a set of critical issues early on to steer the development process in the right direction. In this case, it is essential that this selection is carefully explained in the proposal in order to allow for expert assessment. See also in the introduction.
2 Technology readiness levels as defined in annex G of the General Annexes to the Horizon 2020 Work Programme: http://ec.europa.eu/research/participants/data/ref/h2020/other/wp/2018- 2020/annexes/h2020-wp1820-annex-ga_en.pdf
Expected Impact:increase opportunities for an efficient valorisation of residual streams from different sources;achieve a smaller environmental footprint and costs than those of existing pre-treatments to remove inhibitor compounds. Expected duration: 1 to 4 years.
Type of action: Research and innovation action.
The conditions related to this topic are provided in the chapter 2.3.3 of the BBI JU AWP 2018.
Cross-cutting Priorities:Cross-cutting Key-Enabling Technologies (KETs)
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
2. Eligibility and admissibility conditions: described in Annex B and Annex C of the Work Programme.
Proposal page limits and layout: Please refer to Part B of the proposal template in the submission tool below.
3. Evaluation:
Evaluation criteria, scoring and thresholds are described in Annex H of the H2020 Work Programme, with the exceptions described in part 2.3.6 of the BBI JU Work Plan.
Submission and evaluation processes are described in the Online Manual and the BBI JU Guide for applicants (RIA-IA-CSA)
4. Indicative time for evaluation and grant agreement:
Information on the outcome of evaluation: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
5. Proposal templates, evaluation forms and model... 1. Eligible countries: described in Annex A of the H2020 Work Programme.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
2. Eligibility and admissibility conditions: described in Annex B and Annex C of the Work Programme.
Proposal page limits and layout: Please refer to Part B of the proposal template in the submission tool below.
3. Evaluation:
Evaluation criteria, scoring and thresholds are described in Annex H of the H2020 Work Programme, with the exceptions described in part 2.3.6 of the BBI JU Work Plan.
Submission and evaluation processes are described in the Online Manual and the BBI JU Guide for applicants (RIA-IA-CSA)
4. Indicative time for evaluation and grant agreement:
Information on the outcome of evaluation: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
5. Proposal templates, evaluation forms and model grant agreements (MGA):
Specific rules and funding rates: described in 2.3.6 of the BBI JU Work Plan.
Proposal templates are available after entering the submission tool below.
Standard evaluation form (CSA-RIA-IA)
BBI JU MGA - Multi-Beneficiary
H2020 Annotated Grant Agreement
6. Additional requirements:
Technology readiness levels (TRL)
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in Annex L of the H2020 main Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs. See the Online Manual.
Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
8. Additional documents
BBI JU Work Plan
BBI JU Scientific Innovation and Research Agenda (SIRA)
BBI JU Derogation to H2020 Rules for Participation
BBI JU Regulation of Establishment
H2020 Regulation of Establishment
H2020 Rules for Participation
H2020 Specific Programme
Frequently Asked Questions 2018
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta