HORIZON EUROPE
Europeo
Scope:Specific challenge: The competitiveness of European road vehicle manufacturers is based on technological leadership particularly on system optimisation and affordability, particularly with respect to powertrains. The challenge is to recover a leading position in hybrid technology. The technology will also have positive effect on the reduction of CO2 emissions from road transport and air quality.
Scope: Proposals should develop new knowledge on hybrid components (storage system power electronics, etc.) and system engineering, simulation and technology integration with the aim of achieving hybrid powertrain weight and cost reduction, increased functionality, simplification of complex systems, efficiency and affordability while decreasing emissions and improving performance, comfort and functional safety. For light vehicles, preference would be given to concepts providing significant zero emission ranges. The research should be validated through at least one demonstrator for each platform subject of research.
The Commission considers that proposals requesting a contribution from the EU of between EUR 10 to 20 million each would allow this specific chall...
ver más
Scope:Specific challenge: The competitiveness of European road vehicle manufacturers is based on technological leadership particularly on system optimisation and affordability, particularly with respect to powertrains. The challenge is to recover a leading position in hybrid technology. The technology will also have positive effect on the reduction of CO2 emissions from road transport and air quality.
Scope: Proposals should develop new knowledge on hybrid components (storage system power electronics, etc.) and system engineering, simulation and technology integration with the aim of achieving hybrid powertrain weight and cost reduction, increased functionality, simplification of complex systems, efficiency and affordability while decreasing emissions and improving performance, comfort and functional safety. For light vehicles, preference would be given to concepts providing significant zero emission ranges. The research should be validated through at least one demonstrator for each platform subject of research.
The Commission considers that proposals requesting a contribution from the EU of between EUR 10 to 20 million each would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Expected impact: The research will achieve a 20% powertrain efficiency improvement and a 20% powertrain weight and volume reduction with respect to the best in-class full hybrid vehicles on the market in 2013, while having a maximum 10% cost premium on the conventional model on which the demonstrator is based. To meet air quality targets, the research will prove, by independent testing real driving emissions at least below upcoming Euro 6 or Euro VI limits respectively. The research for light vehicles will develop technologies needed to progress towards the establishment of a future ‘Super Low Emission Vehicles’ standard with emission targets which are ambitiously lower than Euro 6.
Type of action: Innovation Actions
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme.
3.2 Guide to the submission and evaluation process
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Innovation Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical annex)
Standard proposal template
Standard evaluation form
Annotated Model Grant Agreement
Additional provisions:
Horizon 2020 budget flexibility
Classified information
Techn... Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme.
3.2 Guide to the submission and evaluation process
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Innovation Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical annex)
Standard proposal template
Standard evaluation form
Annotated Model Grant Agreement
Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta