Innovating Works

H2020

Cerrada
HORIZON-CL4-2023-DIGITAL-...
HORIZON-CL4-2023-DIGITAL-EMERGING-01-32: Sustainable safe-by-design 2D materials technology (RIA)
ExpectedOutcome:Projects are expected to contribute to the following outcomes:
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 29-03-2023.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Projects are expected to contribute to the following outcomes:

Development of Safe and Sustainable by Design two-dimensional materials (2DM) technology.Societal acceptance of 2DM and 2DM-based technologies.A set of robust and verified assays for toxicity and eco-toxicity testing of 2DM, to support regulatory requirements for their registration and authorisation for use (OECD test guidelines[1], REACH compliance, authorisation pathways[2])
Scope:The increasing commercial exploitation of 2DM necessitates a comprehensive evaluation of their potential impact on human health and the environment. It is thus of utmost importance for 2DM technology development to understand the properties that underlie the potential toxicity of these materials. Since not all 2DMs are alike, it is essential to disentangle the structure-activity relationships for this class of materials.

Proposals should aim to ensure a safe development of 2DM technology and in the long term, a sustainable market entry/penetration of 2DM-based products. Proposals should comply with the Safe and Sustainable by Design framework[3] and criteria.

Multidisciplinary res... ver más

ExpectedOutcome:Projects are expected to contribute to the following outcomes:

Development of Safe and Sustainable by Design two-dimensional materials (2DM) technology.Societal acceptance of 2DM and 2DM-based technologies.A set of robust and verified assays for toxicity and eco-toxicity testing of 2DM, to support regulatory requirements for their registration and authorisation for use (OECD test guidelines[1], REACH compliance, authorisation pathways[2])
Scope:The increasing commercial exploitation of 2DM necessitates a comprehensive evaluation of their potential impact on human health and the environment. It is thus of utmost importance for 2DM technology development to understand the properties that underlie the potential toxicity of these materials. Since not all 2DMs are alike, it is essential to disentangle the structure-activity relationships for this class of materials.

Proposals should aim to ensure a safe development of 2DM technology and in the long term, a sustainable market entry/penetration of 2DM-based products. Proposals should comply with the Safe and Sustainable by Design framework[3] and criteria.

Multidisciplinary research and innovation activities should address all of the following:

Critical examination of 2DM health and environment issues, ranging from general toxicology, to occupational health and environmental impact.Studies and tests of biocompatibility and safety of 2DMs and composites along their life cycle;Development of solutions to modulate potential risks by developing appropriate chemical/physical approaches towards safer manufactured materials and nanomaterials (safe-by-design 2DMs).Assessing the safety of 2DMs and composites at different TRL levels to develop and test best practices along the product development process, from prototypes to products tested in relevant environments in order to guarantee the highest impact possible.Development of validation processes supporting regulatory assessment. Proposals submitted under this topic should include an exploitation strategy, as outlined in the introduction to this Destination.

Research should build on existing standards or contribute to standardisation. Interoperability for data sharing should be addressed.

Proposals should build on or seek collaboration with existing projects and develop synergies with other relevant European, national or regional initiatives, funding programmes and platforms. In particular projects are expected to develop synergies and relate to activities and outcomes of the projects selected under the other topics of ‘Graphene and 2D materials: Europe in the lead’ and where relevant of HORIZON-CL4-2023-RESILIENCE-01-21/22/23/24.

Proposals should also cover the contribution to the governance and overall coordination of the Graphene Flagship initiative.

Proposals should indicate which chapters of the Strategic Research and Innovation Plan for chemicals and materials they will contribute to.

Proposals should consider involving, directly or indirectly, appropriate expertise in other disciplines, for example in SSH disciplines, where relevant to achieve wider societal acceptance of 2DM-based technologies.


Specific Topic Conditions:Activities are expected to start at TRL 2-3 and achieve TRL 4-5 by the end of the project – see General Annex B.




[1]https://www.oecd.org/chemicalsafety/testing/oecd-guidelines-testing-chemicals-related-documents.htm

[2]https://echa.europa.eu/en/regulations/reach/registration

[3]See documents defining the SSbD framework and criteria on: https://ec.europa.eu/info/research-and-innovation/research-area/industrial-research-and-innovation/key-enabling-technologies/advanced-materials-and-chemicals_en

ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: *Presupuesto para cada participante en el proyecto
Requisitos técnicos: ExpectedOutcome:Projects are expected to contribute to the following outcomes: ExpectedOutcome:Projects are expected to contribute to the following outcomes:
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Subcontracting costs.
Purchase costs.
Other cost categories.
Indirect costs.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 4:. Es el primer paso para determinar si los componentes individuales funcionarán juntos como un sistema en un entorno de laboratorio. Es un sistema de baja fidelidad para demostrar la funcionalidad básica y se definen las predicciones de rendimiento asociadas en relación con el entorno operativo final. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
Para el presupuesto subvencionable la intensidad de la ayuda en formato fondo perdido podrá alcanzar como minimo un 100%.
The funding rate for RIA projects is 100 % of the eligible costs for all types of organizations. The funding rate for RIA projects is 100 % of the eligible costs for all types of organizations.
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea pero en los últimos 6 meses la línea ha concecido
Total concedido en los últimos 6 meses.
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.