Innovating Works

H2020

Cerrada
HORIZON-CL4-2022-TWIN-TRA...
HORIZON-CL4-2022-TWIN-TRANSITION-01-13: Raw material preparation for clean steel production (Clean Steel Partnership) (IA)
ExpectedOutcome:Projects related to the two main raw-materials in the iron and steelmaking route: the iron-ore and the scrap.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 30-03-2022.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Projects related to the two main raw-materials in the iron and steelmaking route: the iron-ore and the scrap.

As regards iron ore, the availability of high-grade iron ores is expected to become a more critical factor, as demand will increase. Therefore, technologies for the upgrade and the use of low-quality iron ores are needed. This includes low carbon technologies for sintering/ pelletisation and/or cold bonded iron ore agglomeration.

Projects are expected to contribute to the following outcomes:

Testing and validation of technologies for the upgrade and the use of low-quality iron ores. This includes low carbon technologies for sintering/ pelletisation and/or cold bonded iron ore agglomeration;Identification of best available and applicable technologies for the reduction of impurities in post-consumer scrap;Technologies for the valorisation of low-quality scrap streams.
Scope:The concepts to be developed under this topic are expected to address one or more of the following areas:

Enhanced utilisation of scrap, through improved scrap sorting and removal of scrap pollution, by new detecting technologies.... ver más

ExpectedOutcome:Projects related to the two main raw-materials in the iron and steelmaking route: the iron-ore and the scrap.

As regards iron ore, the availability of high-grade iron ores is expected to become a more critical factor, as demand will increase. Therefore, technologies for the upgrade and the use of low-quality iron ores are needed. This includes low carbon technologies for sintering/ pelletisation and/or cold bonded iron ore agglomeration.

Projects are expected to contribute to the following outcomes:

Testing and validation of technologies for the upgrade and the use of low-quality iron ores. This includes low carbon technologies for sintering/ pelletisation and/or cold bonded iron ore agglomeration;Identification of best available and applicable technologies for the reduction of impurities in post-consumer scrap;Technologies for the valorisation of low-quality scrap streams.
Scope:The concepts to be developed under this topic are expected to address one or more of the following areas:

Enhanced utilisation of scrap, through improved scrap sorting and removal of scrap pollution, by new detecting technologies. The aim is to remove these impurities before melting, in order to achieve the same quality of the finished product and reducing CO2 emissions;Technologies allowing upgrade processes in low grade iron ores to make them suitable for pelletisation or direct use in existing steelworks to address the issue of the availability of high grade iron ores which is expected to become a more critical factor in the coming years as well as broadening the types of ore grades that can be utilized from different sources;Application of cold bonded agglomerate: binders, raw materials composition and processing conditions for the use of low quality iron ore grades. Proposals submitted under this topic should include a business case and exploitation strategy, as outlined in the introduction to this Destination.

This topic implements the co-programmed European Partnership on Clean Steel.

In this topic the integration of the gender dimension (sex and gender analysis) in research and innovation content is not a mandatory requirement


Specific Topic Conditions:Activities are expected to start at TRL 6 and achieve TRL 8 by the end of the project – see General Annex B.




Cross-cutting Priorities:Artificial IntelligenceCo-programmed European PartnershipsDigital Agenda


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: ExpectedOutcome:Projects related to the two main raw-materials in the iron and steelmaking route: the iron-ore and the scrap. ExpectedOutcome:Projects related to the two main raw-materials in the iron and steelmaking route: the iron-ore and the scrap.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Subcontracting costs.
Purchase costs.
Other cost categories.
Indirect costs.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 6:. Representa un paso importante en demostrar la madurez de una tecnología. Se construye un prototipo de alta fidelidad que aborda adecuadamente las cuestiones críticas de escala, que opera en un entorno relevante, y que debe ser a su vez una buena representación del entorno operativo real. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Para el presupuesto subvencionable la intensidad de la ayuda en formato fondo perdido podrá alcanzar desde un 70% hasta un 100%.
The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities. The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities.
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.