Innovating Works

H2020

Cerrada
HORIZON-CL4-2022-TWIN-TRANSITI...
Digital tools to support the engineering of a Circular Economy (Made in Europe Partnership) (RIA)
ExpectedOutcome:Projects are expected to contribute to the following outcomes:
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 30-03-2022.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Projects are expected to contribute to the following outcomes:

Provide a range of support solutions and innovative digital tools for engineers, technicians and operators on the factory floor, in order to build agile, sustainable and responsive production environment and supply chains, with specific focus on areas such as material saving, repair, refurbishing, re-manufacturing, recycling, and reuse of products and components;Reduction of the dependency from imported raw materials or harmful materials for the European manufacturing sector (e.g. by material consumption reduction, material substitution and use of secondary raw materials);Define specifications and standards for data, products, and/or business processes, that can be agreed and commonly used by many industrial actors and across different industry sectors; and facilitate industry agreements on circularity and sustainability through increased data exchange among value chain actors and enable the development of new types of businesses;Reduce the skills and knowledge gap for the actors involved.
Scope:The focus is on developing new concepts, methods, and digital tools to support further en... ver más

ExpectedOutcome:Projects are expected to contribute to the following outcomes:

Provide a range of support solutions and innovative digital tools for engineers, technicians and operators on the factory floor, in order to build agile, sustainable and responsive production environment and supply chains, with specific focus on areas such as material saving, repair, refurbishing, re-manufacturing, recycling, and reuse of products and components;Reduction of the dependency from imported raw materials or harmful materials for the European manufacturing sector (e.g. by material consumption reduction, material substitution and use of secondary raw materials);Define specifications and standards for data, products, and/or business processes, that can be agreed and commonly used by many industrial actors and across different industry sectors; and facilitate industry agreements on circularity and sustainability through increased data exchange among value chain actors and enable the development of new types of businesses;Reduce the skills and knowledge gap for the actors involved.
Scope:The focus is on developing new concepts, methods, and digital tools to support further engineering of the industrial processes for recycling, re-manufacturing, refurbishing, and reuse of manufactured products and components. New solutions will enable remanufacturing and high-quality recycling by digitalisation of product and component information throughout the whole product lifecycle, in line with the 2020 Circular Economy Action Plan.

Another challenge that falls within this scope is the human dimension. The support tools need to work with the user, and training, knowledge transfer, cognitive interfaces, as well as acceptance and uptake will be vital in the solutions proposed.

Proposals should cover all of the following aspects:

Development of innovative concepts, methods, and tools that track and trace the status of relevant manufactured products and components, such as electronic systems and components as well as machine tools, and increase transparency and accountability for these along their lifecycle. Where appropriate, proposals need to be able to link up with manufacturing industrial data spaces platforms, so that circular economy data can be shared with a larger set of organisations;Inclusion and handling of real-time production data in analysis software and tools, notably for decision making and control, as well as knowledge management;Demonstration of the support tools in at least two different realistic production environments with a clear target of improving quality and sustainability with significant economic value. If applicable, legal obstacles to implementation of the proposed solutions should be identified. Proposals submitted under this topic should include a business case and exploitation strategy, as outlined in the introduction to this Destination.

Research must build on existing standards or contribute to standardisation. Interoperability for data sharing should be addressed. Additionally, a strategy for skills development should be presented, associating social partners when relevant.

All projects should build on or seek collaboration with existing projects and develop synergies with other relevant European, national or regional initiatives, funding programmes and platforms.

This topic implements the co-programmed European Partnership Made in Europe.

In this topic the integration of the gender dimension (sex and gender analysis) in research and innovation content is not a mandatory requirement


Specific Topic Conditions:Activities are expected to start at TRL 3-4 and achieve TRL 6 by the end of the project – see General Annex B.




Cross-cutting Priorities:Social sciences and humanitiesCo-programmed European PartnershipsArtificial IntelligenceDigital Agenda


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:
Empresas Micro, Pequeña, Mediana, Grande
Centros Tecnológicos
Universidades
Organismos públicos

Características del Proyecto

Requisitos de diseño: Duración: Requisitos técnicos: ExpectedOutcome:Projects are expected to contribute to the following outcomes: ¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 4:. Es el primer paso para determinar si los componentes individuales funcionarán juntos como un sistema en un entorno de laboratorio. Es un sistema de baja fidelidad para demostrar la funcionalidad básica y se definen las predicciones de rendimiento asociadas en relación con el entorno operativo final. leer más.
TRL esperado:
Estadísticas proyectos financiados: Te facilitamos algunas estadísticas de los últimos 2 proyectos tramitados conocidos por categoría de empresa, porcentaje y presupuesto medio.

Categoria

%

Presupuesto medio

Micro

50%

0€

Mediana

50%

0€

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
The funding rate for RIA projects is 100 % of the eligible costs for all types of organizations.
Condiciones: No existe condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea pero en los últimos 6 meses la línea ha concecido
Total concedido en los últimos 6 meses.
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.