Innovating Works
HORIZON-CL4-2022-TWIN-TRA...
HORIZON-CL4-2022-TWIN-TRANSITION-01-01: Rapid reconfigurable production process chains (Made in Europe Partnership) (IA)
Sólo fondo perdido 0 €
Comunidad autónoma
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 30-03-2022.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Projects are expected to contribute to the following outcomes:

Achieve a significant reduction in reconfiguration time, which includes all steps between stopping a production, reconfiguration of the individual production steps, requalification, adjustment of the intra-logistics processes, and ramping up to a full production speed;Develop validated standardised interfaces and protocols to enable digitalised and thus flexible manufacturing processes;Develop protocols for best practices in rapid reconfiguration applicable not only for the products and sectors present in the project, but also transferable to other sectors and application areas.
Scope:In times of disrupted supply chains or rapidly changing customer demands, production lines will need to be built flexible enough to be able to handle these variations. Rapid reconfiguration technologies of more flexible systems, will enable industries with many production process steps to maintain a resilience against sudden changes in ordering and/or supplies.

The projects should address reconfiguration of production systems in which the lines are running at medium or high volume manufactu... ver más

ExpectedOutcome:Projects are expected to contribute to the following outcomes:

Achieve a significant reduction in reconfiguration time, which includes all steps between stopping a production, reconfiguration of the individual production steps, requalification, adjustment of the intra-logistics processes, and ramping up to a full production speed;Develop validated standardised interfaces and protocols to enable digitalised and thus flexible manufacturing processes;Develop protocols for best practices in rapid reconfiguration applicable not only for the products and sectors present in the project, but also transferable to other sectors and application areas.
Scope:In times of disrupted supply chains or rapidly changing customer demands, production lines will need to be built flexible enough to be able to handle these variations. Rapid reconfiguration technologies of more flexible systems, will enable industries with many production process steps to maintain a resilience against sudden changes in ordering and/or supplies.

The projects should address reconfiguration of production systems in which the lines are running at medium or high volume manufacturing rates (MVM and HVM respectively), and include a variety of production steps, such as cleaning, forming, thermal treatments, cutting, joining, surface treatments, painting, printing, assembly, etc. It should also consider complex logistics and non-manufacturing operations enabling the production runs. Projects should provide strategies for awareness and early detection of reconfiguration needs, e.g. by using A.I. and data technologies, to enhance their resilience towards threatening events or crisis situations.

The reconfiguration should be ambitious to the extent that the change addresses a new customer base or new societal needs, or drastically changes the original production processes and/or supply chain with minimal reconfiguration costs.

Projects should also include protocols for best practices of the reconfiguration that can be applicable also outside the sectors active in the project, which would include taking into account any sector specific qualification requirements (such as clean room levels or certifications for sectors such as medical and food). These protocols as well as the projects should have a human-centred perspective, including skills requirements and training adapted to different education levels and needs.

Proposals submitted under this topic should include a business case and exploitation strategy, as outlined in the introduction to this Destination.

Research must build on existing standards or contribute to standardisation. Interoperability for data sharing should be addressed. Additionally, a strategy for skills development should be presented, associating social partners when relevant.

All projects should build on or seek collaboration with existing projects and develop synergies with other relevant European, national or regional initiatives, funding programmes and platforms.

In order to achieve the expected outcomes, International Cooperation is encouraged, in particular with Japan, South Korea or Canada.

This topic implements the co-programmed European Partnership Made in Europe.


Specific Topic Conditions:Activities are expected to start at TRL 5 and achieve TRL 7 by the end of the project – see General Annex B.




Cross-cutting Priorities:Digital AgendaSocial sciences and humanitiesCo-programmed European PartnershipsInternational CooperationArtificial Intelligence


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Comunidad autónoma :
Solo pueden aplicar a esta linea las empresas con sede en:
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración: ¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Subcontracting costs.
Purchase costs.
Other cost categories.
Indirect costs.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 6:. Representa un paso importante en demostrar la madurez de una tecnología. Se construye un prototipo de alta fidelidad que aborda adecuadamente las cuestiones críticas de escala, que opera en un entorno relevante, y que debe ser a su vez una buena representación del entorno operativo real. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Para el presupuesto subvencionable la intensidad de la ayuda en formato fondo perdido podrá alcanzar desde un 70% hasta un 100%.
The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities. The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities.
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.