Innovating Works

H2020

Cerrada
HORIZON-CL5-2022-D3-03-05
HORIZON-CL5-2022-D3-03-05: Novel Thin Film (TF) technologies targeting high efficiencies
ExpectedOutcome:Photovoltaic power generation is pivotal in the transition towards a clean energy system and the achievement of the zero-emissions target. To that end, it is important to enhance affordability, security of supply and sustainability of PV technologies along with further efficiency improvements. Consequently, project results are expected to contribute to all of the following outcomes:
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 10-01-2023.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Photovoltaic power generation is pivotal in the transition towards a clean energy system and the achievement of the zero-emissions target. To that end, it is important to enhance affordability, security of supply and sustainability of PV technologies along with further efficiency improvements. Consequently, project results are expected to contribute to all of the following outcomes:

Increase the potential of thin-film technologies for mass production, low cost and/or specialised applications.Reinforce the European PV value chain, support local companies to develop and sell differentiated PV products.Allow for an efficient use of available areas for renewable energy generation/ reducing competition between different kinds of land use by further increasing PV energy yield/m2.Enable and facilitate large-scale deployment of PV and generation of renewable electricity.
Scope:An alternative to c-Silicon PV is thin-film solar cells, which can be fabricated on various and flexible substrates (including glass, metal foils and polymers). A benefit of thin-film PV is the lower direct semiconductor materials cost. Realising lower costs in production requires... ver más

ExpectedOutcome:Photovoltaic power generation is pivotal in the transition towards a clean energy system and the achievement of the zero-emissions target. To that end, it is important to enhance affordability, security of supply and sustainability of PV technologies along with further efficiency improvements. Consequently, project results are expected to contribute to all of the following outcomes:

Increase the potential of thin-film technologies for mass production, low cost and/or specialised applications.Reinforce the European PV value chain, support local companies to develop and sell differentiated PV products.Allow for an efficient use of available areas for renewable energy generation/ reducing competition between different kinds of land use by further increasing PV energy yield/m2.Enable and facilitate large-scale deployment of PV and generation of renewable electricity.
Scope:An alternative to c-Silicon PV is thin-film solar cells, which can be fabricated on various and flexible substrates (including glass, metal foils and polymers). A benefit of thin-film PV is the lower direct semiconductor materials cost. Realising lower costs in production requires high input material utilisation and low raw materials conversion costs. Largescale thin-film module production can be more cost efficient when utilising rapid processing technologies. With further advances in scientific understanding, 25% efficiency devices are within reach as are even higher efficiencies in tandem architectures. Translating those device and process advances to manufacturing technology will dramatically reduce LCOE once sufficiently scaled in both module size and production volume. This will require adapting deposition processes for higher rates and to larger-scale equipment while developing suitable robust techniques for inline process and quality control.

The proposal should address all of the following:

Develop novel environmentally benign thin-film technology concepts that optimise PV cell and module architecture, increase durability, decrease losses (minimising also the cell-to-module efficiency gap) and target very high efficiencies (>25%) with flexibility for specific applications.Employ simple, scalable and low cost/low energy consumption and higher rate deposition processes.Ensure compliance with all relevant standards, including those related to the specific applications targeted.Perform device/module real–life (under actual outdoor operating conditions) characterisation for reliability and energy yield assessment.Perform a life cycle analysis to bring evidence of the lower environmental impact, better resource efficiency than current commercial PV technologies, and circularity potential.
Specific Topic Conditions:Activities are expected to achieve TRL 5 by the end of the project – see General Annex B.




Cross-cutting Priorities:New European BauhausArtificial IntelligenceDigital Agenda


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: ExpectedOutcome:Photovoltaic power generation is pivotal in the transition towards a clean energy system and the achievement of the zero-emissions target. To that end, it is important to enhance affordability, security of supply and sustainability of PV technologies along with further efficiency improvements. Consequently, project results are expected to contribute to all of the following outcomes: ExpectedOutcome:Photovoltaic power generation is pivotal in the transition towards a clean energy system and the achievement of the zero-emissions target. To that end, it is important to enhance affordability, security of supply and sustainability of PV technologies along with further efficiency improvements. Consequently, project results are expected to contribute to all of the following outcomes:
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Subcontracting costs.
Purchase costs.
Other cost categories.
Indirect costs.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 4:. Es el primer paso para determinar si los componentes individuales funcionarán juntos como un sistema en un entorno de laboratorio. Es un sistema de baja fidelidad para demostrar la funcionalidad básica y se definen las predicciones de rendimiento asociadas en relación con el entorno operativo final. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Para el presupuesto subvencionable la intensidad de la ayuda en formato fondo perdido podrá alcanzar como minimo un 100%.
The funding rate for RIA projects is 100 % of the eligible costs for all types of organizations. The funding rate for RIA projects is 100 % of the eligible costs for all types of organizations.
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.