Innovating Works
SEC-09-FCT-2017
SEC-09-FCT-2017: Toolkits integrating tools and techniques for forensic laboratories
Specific Challenge:Since 2011 the EU has developed a vision about European Forensic Science 2020 including the creation of a European Forensic Science Area and the development of forensic science infrastructure in Europe.[1]
Sólo fondo perdido 10M €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 24-08-2017.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Specific Challenge:Since 2011 the EU has developed a vision about European Forensic Science 2020 including the creation of a European Forensic Science Area and the development of forensic science infrastructure in Europe.[1]

A wide, heterogeneous, variety of forensic tools are in use or being developed across Europe, making the comparison and exchange of information among forensic laboratories difficult and sometimes impossible, which limits the use of forensic data in cross-border investigations, and in foreign courts. Forensic data need to be quickly available, at an acceptable cost, across borders.


Scope:The most promising forensic techniques need to be developed further, and brought up from experiment to a toolkit usable on a daily basis across Europe. This can be achieved if forensic laboratories from a broad variety of EU countries with diverse legal systems agree on common technical standards and join forces along the following steps:

Phase 0: To prepare an inventory of forensic technologies already available at TRL 4 or 5, and to identify, within all areas covered by the various ENFSI working groups (http://www.enfsi.eu/), a sub... ver más

Specific Challenge:Since 2011 the EU has developed a vision about European Forensic Science 2020 including the creation of a European Forensic Science Area and the development of forensic science infrastructure in Europe.[1]

A wide, heterogeneous, variety of forensic tools are in use or being developed across Europe, making the comparison and exchange of information among forensic laboratories difficult and sometimes impossible, which limits the use of forensic data in cross-border investigations, and in foreign courts. Forensic data need to be quickly available, at an acceptable cost, across borders.


Scope:The most promising forensic techniques need to be developed further, and brought up from experiment to a toolkit usable on a daily basis across Europe. This can be achieved if forensic laboratories from a broad variety of EU countries with diverse legal systems agree on common technical standards and join forces along the following steps:

Phase 0: To prepare an inventory of forensic technologies already available at TRL 4 or 5, and to identify, within all areas covered by the various ENFSI working groups (http://www.enfsi.eu/), a subset of technologies to be brought at TRL 8;

Phase 1: To prepare the tenders packages for calls for tenders to build prototypes of a toolkit integrating the above-mentioned subset of technologies, that can be used across Europe; To develop EU-wide benchmarks and validation methods for forensic technologies;

Phase 2: To implement the calls for tenders to generate 2 prototype toolkits from 2 different sources;

Phase 3: To benchmark and validate the 2 toolkits against the methods developed during Phase 1;

Phase 4: To draft a curriculum for pan European training in forensic technologies, and to plan for its assessment across Europe; to initiate the EU-wide certification of the toolkits based on the results of Phase 3.

For grants awarded under this topic SEC-09-FCT-2017, beneficiaries will be subject to the following additional obligations aiming to ensure exploitation of its results:

To ensure that the outcome of the PCP action becomes also available to EU Member State national authorities as well as EU agencies not participating in the PCP for further procurement purposes, the proposal must necessarily state:

(1). Agreement from participating procurement authorities to negotiate, in good faith and on a case-by-case basis, with non-participating procurement authorities that wish to procure a capability or a product fully or partly derived from the PCP action, the use of the information required to run such a procurement process, and solely for that purpose.

(2). Commitment from participating procurement authorities to consult with any legal entity generating information to be released for the purpose set out in paragraph (1), unless contrary to applicable legislation.

(3). Commitment from participating procurement authorities to negotiate the use granted under paragraph (1) on Fair Reasonable and Non-Discriminatory (FRAND) terms.

The respective option on additional exploitation obligations of Article 28.1 of the Model Grant Agreement will be applied.

The outcome of the proposal is expected to lead to development up to Technology Readiness Level (TRL) 8; please see part G of the General Annexes.

Indicative budget: The Commission considers that proposals requesting a contribution from the EU of € 10million would allow for this topic to be addressed appropriately. Nonetheless this does not preclude submission and selection of proposals requesting other amounts.


Expected Impact:Medium term:

Advanced forensic toolkits usable across the EU an providing comparable results admissible in court; Long term:

Path towards an EU-wide certification mechanism based on common standards.
Delegation Exception Footnote:This activity directly aimed at supporting the development and implementation of evidence base for R&I policies and supporting various groups of stakeholders is excluded from the delegation to the Research Executive Agency and will be implemented by the Commission services


Cross-cutting Priorities:Innovation Procurement


[1]http://www.consilium.europa.eu/uedocs/cms_data/docs/pressdata/en/jha/126875.pdf

ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Specific Challenge:Since 2011 the EU has developed a vision about European Forensic Science 2020 including the creation of a European Forensic Science Area and the development of forensic science infrastructure in Europe.[1] Specific Challenge:Since 2011 the EU has developed a vision about European Forensic Science 2020 including the creation of a European Forensic Science Area and the development of forensic science infrastructure in Europe.[1]
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Amortizaciones.
Activos.
Otros Gastos.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Please read carefully all provisions below before the preparation of your application.
 
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to China, Japan, Republic of Korea, Mexico, Russia, Taiwan).
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme, with the following exceptions: Forensic laboratories[[Forensic laboratories are scientific laboratories that examine physical evidence in criminal cases. After examination, they provide reports and opinion testimony.]] or institutes from a minimum of 5 EU Member States or international organisations must be beneficiaries of the grant agreement and should be directly involved in the carrying out of the tasks foreseen in the grant (Additional participation of laboratories or institutes from Associated Countries is encouraged).
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme.
3.2&...
Please read carefully all provisions below before the preparation of your application.
 
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to China, Japan, Republic of Korea, Mexico, Russia, Taiwan).
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme, with the following exceptions: Forensic laboratories[[Forensic laboratories are scientific laboratories that examine physical evidence in criminal cases. After examination, they provide reports and opinion testimony.]] or institutes from a minimum of 5 EU Member States or international organisations must be beneficiaries of the grant agreement and should be directly involved in the carrying out of the tasks foreseen in the grant (Additional participation of laboratories or institutes from Associated Countries is encouraged).
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme.
3.2 Submission and evaluation process: Guide to the submission and evaluation process
   
Indicative timetable for evaluation and grant agreement:
Information on the outcome of single-stage evaluation: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
 
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
The funding rate for Pre-Commercial Procurement (PCP) actions is limited to 90% of the total eligible costs (PCP is procurement of R&D services) to leverage co-financing from the procurers.
Pre-Commercial Procurement (PCP) Cofund:
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
Annotated Grant Agreement
Specific requirements for innovation procurement supported by Horizon 2020 grants (PCP, PPI)
 
Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
 
Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in annex L of the Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
- Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs.
- Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
 
Additional documents
H2020 Work Programme 2016-17: Introduction
H2020 Work Programme 2016-17: Innovation in SMEs
H2020 Work Programme 2016-17: Secure societies – protecting freedom and security of Europe and its citizens
H2020 Work Programme 2016-17: Fast Track to Innovation Pilot
H2020 Work Programme 2016-17: Dissemination, Exploitation and Evaluation
H2020 Work Programme 2016-17: General Annexes
Legal basis: Horizon 2020 - Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme
 
 
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
El presupuesto total de la convocatoria asciende a
Presupuesto total de la convocatoria.
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-SEC-2016-2017 Toolkits integrating tools and techniques for forensic laboratories Specific Challenge:Since 2011 the EU has developed a vision about European Forensic Science 2020 including the creation of a European Forens...
Sin info.
SEC-09-FCT-2017 Toolkits integrating tools and techniques for forensic laboratories
en consorcio: Specific Challenge:Since 2011 the EU has developed a vision about European Forensic Science 2020 including the creation of a European Forens...
Cerrada hace 7 años | Próxima convocatoria prevista para el mes de