Innovating Works
SPACE-10-TEC-2018-2020
SPACE-10-TEC-2018-2020: Technologies for European non-dependence and competitiveness
Specific Challenge:The space sector is a strategic asset contributing to the independence, security and prosperity of Europe and its role in the world. Europe needs non-dependent access to critical space technologies, which is a sine qua non condition for achieving Europe’s strategic objectives. "Non-dependence" refers to the possibility for Europe to have free, unrestricted access to any required space technology. Reaching non-dependence in certain technologies will open new markets to our industries and will increase the overall competitiveness of the European Space sector.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 06-03-2018.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Specific Challenge:The space sector is a strategic asset contributing to the independence, security and prosperity of Europe and its role in the world. Europe needs non-dependent access to critical space technologies, which is a sine qua non condition for achieving Europe’s strategic objectives. "Non-dependence" refers to the possibility for Europe to have free, unrestricted access to any required space technology. Reaching non-dependence in certain technologies will open new markets to our industries and will increase the overall competitiveness of the European Space sector.

Research in technologies for European non-dependence and competitiveness has been undertaken within the frame of the Commission-ESA-EDA Joint Task Force (JTF) on Critical Technologies for European non-Dependence, launched in 2008.

In 2016, the JTF established the List of Actions for 2018-2020 (hereinafter JTF List of Actions 2018-2020), aiming at enhancing the TRL of the technologies identified in the list.


Scope:Actions from the JTF List of Actions 2018-2020 shall be implemented sequentially in 2018 and in 2019 as the following subtopics.

Gr... ver más

Specific Challenge:The space sector is a strategic asset contributing to the independence, security and prosperity of Europe and its role in the world. Europe needs non-dependent access to critical space technologies, which is a sine qua non condition for achieving Europe’s strategic objectives. "Non-dependence" refers to the possibility for Europe to have free, unrestricted access to any required space technology. Reaching non-dependence in certain technologies will open new markets to our industries and will increase the overall competitiveness of the European Space sector.

Research in technologies for European non-dependence and competitiveness has been undertaken within the frame of the Commission-ESA-EDA Joint Task Force (JTF) on Critical Technologies for European non-Dependence, launched in 2008.

In 2016, the JTF established the List of Actions for 2018-2020 (hereinafter JTF List of Actions 2018-2020), aiming at enhancing the TRL of the technologies identified in the list.


Scope:Actions from the JTF List of Actions 2018-2020 shall be implemented sequentially in 2018 and in 2019 as the following subtopics.

Group A (2018):

JTF-2018/20-3 – High Capacity FPGAs [U12]JTF-2018/20-8 – ASICS: 28nm Deep Sub-Micron (DSM) [U22b]JTF-2018/20-16 – Active discrete power components [U14]JTF-2018/20-18 – RF components [N27]JTF-2018/20-19 – Passive components [U13]JTF-2018/20-22 – High temperature packaging [N49] Group B (2019):

JTF-2018/20-2 – ASICS for mixed signal processing [U11]JTF-2018/20-11 – Design and qualification of µcontroller for space applications [N52]JTF-2018/20-12 – Design and prototype of nvRAM for SPACE with serial interface ((quad)-SPI) [N53]JTF-2018/20-21 – High density (1000 pins and beyond) assembly capabilities and PCBs [U17]JTF-2018/20-28 – Photonics components [U15]JTF-2018/20-31 – Advanced laser crystals for high power space applications [N63] Group C (2020):

JTF-2018/20-5 – Very high performance microprocessors [U20]JTF-2018/20-9 – Design and prototype of ultra-reprogrammable SoCs [N50]JTF-2018/20-14 – Fiber optic or photonic integrated technology gyro-based inertial measurement unit (IMU) [U6]JTF-2018/20-16 – Active discrete power components [U14]JTF-2018/20-17 – Power amplification: travelling wave tube materials [U7]JTF-2018/20-23 – SW tool: automatic generation of code [N64]JTF-2018/20-33 – Advanced materials and material technology for combustion chambers [U4] Context information and high-level requirements, including description of scope, initial and target TRLs, and, where applicable, references and information of related activities, are provided in the JTF List of Actions 2018-2020. Accordingly, a technical guidance document, based on the JTF List of Actions 2018-2020, is published on the Funding & Tenders Portal outlining all relevant information to the selected actions.

Activities shall be complementary and create synergy with other European activities in the same domain either in the space or non-space fields. Technological spin in and/or bilateral collaborations should be enhanced between European non-space and space industries, including technology research institutes and academia.

To this end, proposals shall include the following tasks:

Analysis of relevant available roadmaps, including roadmaps developed in the context of actions for Key Enabling Technologies supported by the Union;Analysis of how their selected critical space technologies can contribute to different space applications or, where applicable, to non-space sectors (such as through technology transfer or spin off);Commercial assessment of the supply chain technology in the space or non-space domains and, if applicable, a business plan for commercialisation with a full range (preload) of recurring products With a view to achieving the non-dependence objective, applicants must

Describe the technologies and/or technology processes to be used and show that they are free of any legal export restrictions or limitations, such as those established in the International Traffic in Arms Regulations (ITAR) or equivalent instruments applicable in other jurisdictions;Set up a suitable technology development process aiming at avoiding export restrictions of non-EU states. The involvement of post-graduate scientists, engineers and researchers and the promotion of gender balance is encouraged, for example through professional work experience or through fellowships/scholarships as applicable.

The Commission considers that proposals requesting a contribution from the EU of between EUR 1 and 3 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.

Proposals under this topic may be subject to security scrutiny if they could potentially lead to security-sensitive results that should be classified (see guide for classification available at the Funding & Tenders Portal).


Expected Impact: To reduce the dependence on critical technologies and capabilities from outside Europe for future space applications, as identified in the JTF List of Actions 2018-2020; To develop or regain in the mid-term the European capacity to operate independently in space, e.g. by developing in a timely manner reliable and affordable space technologies that in some cases may already exist outside Europe or in European terrestrial applications; To enhance the technical capabilities and overall competitiveness of European space industry vendors on the worldwide market; To open new competition opportunities for European manufacturers by reducing dependency on export restricted technologies that are of strategic importance to future European space efforts; To improve the overall European space technology landscape and complement and/or create synergy with activities of European and national either in the space or non-space fields.
ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Specific Challenge:The space sector is a strategic asset contributing to the independence, security and prosperity of Europe and its role in the world. Europe needs non-dependent access to critical space technologies, which is a sine qua non condition for achieving Europe’s strategic objectives. "Non-dependence" refers to the possibility for Europe to have free, unrestricted access to any required space technology. Reaching non-dependence in certain technologies will open new markets to our industries and will increase the overall competitiveness of the European Space sector. Specific Challenge:The space sector is a strategic asset contributing to the independence, security and prosperity of Europe and its role in the world. Europe needs non-dependent access to critical space technologies, which is a sine qua non condition for achieving Europe’s strategic objectives. "Non-dependence" refers to the possibility for Europe to have free, unrestricted access to any required space technology. Reaching non-dependence in certain technologies will open new markets to our industries and will increase the overall competitiveness of the European Space sector.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Amortizaciones.
Activos.
Otros Gastos.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
1. Eligible countries: described in Annex A of the Work Programme.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
 
2. Eligibility and admissibility conditions: described in Annex B and Annex C of the Work Programme.
 
Applicants can only select subtopics listed in group A for the call deadline in 2018.
Applicants can only select subtopics listed in group B for the call deadline in 2019.
Applicants can only select subtopics listed in group C for the call deadline in 2020.
A maximum of one proposal per subtopic shall be selected for funding.
Proposal page limits and layout: please refer to Part B of the proposal template in the submission system below.
 
3. Evaluation:
Evaluation criteria, scoring and thresholds are described in Annex H of the Work Programme.  
Submission and evaluation processes are described in the Online Manual.
4. Indicative time for evaluation and grant agreements:
Information on the outcome of evaluation (single-stage call): maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
5. Proposal templates, evaluation forms and model grant agreements (MGA):
R...
1. Eligible countries: described in Annex A of the Work Programme.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
 
2. Eligibility and admissibility conditions: described in Annex B and Annex C of the Work Programme.
 
Applicants can only select subtopics listed in group A for the call deadline in 2018.
Applicants can only select subtopics listed in group B for the call deadline in 2019.
Applicants can only select subtopics listed in group C for the call deadline in 2020.
A maximum of one proposal per subtopic shall be selected for funding.
Proposal page limits and layout: please refer to Part B of the proposal template in the submission system below.
 
3. Evaluation:
Evaluation criteria, scoring and thresholds are described in Annex H of the Work Programme.  
Submission and evaluation processes are described in the Online Manual.
4. Indicative time for evaluation and grant agreements:
Information on the outcome of evaluation (single-stage call): maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
5. Proposal templates, evaluation forms and model grant agreements (MGA):
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
General MGA - Multi-Beneficiary
Annotated Grant Agreement
6. Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
For grants awarded under this topic the Commission or Agency may object to a transfer of ownership or the exclusive licensing of results to a third party established in a third country not associated to Horizon 2020. The respective option of Article 30.3 of the Model Grant Agreement will be applied.
For grants awarded under this topic beneficiaries will be subject to the additional exploitation obligations:
For a period of up to 4 years after the end of the project, access rights to the use of products and/or processes generated by the project shall be given to European entities, in compliance with the signed Grant Agreement and with no legal restrictions and limitations stemming from International Traffic in Arms Regulations (ITAR) or equivalent instruments applicable in other jurisdictions.
Applicants must acknowledge and incorporate this obligation in the proposal and Annex I to the Grant Agreement. The respective option of Article 28.1 (and Articles 9 and 30.2) of the Model Grant Agreement will be applied.
8. Additional documents:
Critical Space Technologies: guidance document for Horizon 2020 Work Programme 2018-2020
Frequently Asked Questions on SPACE-10-TEC-2018
1. Introduction WP 2018-20
5. Introduction to Leadership in enabling and industrial technologies (LEITs) WP 2018-20
5iii. Space WP 2018-20
General annexes to the Work Programme 2018-2020
Legal basis: Horizon 2020 Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in Annex L of the Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs. See the Online Manual.
Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
 
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-SPACE-2018-2020 Technologies for European non-dependence and competitiveness Specific Challenge:The space sector is a strategic asset contributing to the independence, security and prosperity of Europe and its role in...
Sin info.
SPACE-10-TEC-2018-2020 Technologies for European non-dependence and competitiveness
en consorcio: Specific Challenge:The space sector is a strategic asset contributing to the independence, security and prosperity of Europe and its role in...
Cerrada hace 7 años | Próxima convocatoria prevista para el mes de