HORIZON EUROPE
Europeo
Specific Challenge:Additive Manufacturing (AM), including 3D-Printing, is one of the potential game changers that, for some applications, has already reached a tipping point of maturity. European companies are still strong in some areas but this position requires high levels of continuous innovation, especially where competitors are fast approaching. There are also other areas that are comparatively less developed and where the technology transfer and adoption is not functional, leading to a slow uptake of the results.
Despite the EC support, in the global picture the competitiveness of the European companies is threatened by important investments at international level. Moreover, some of the more fundamental aspects in order to take advantage of this promising technology still need to be addressed.
It is necessary to identify current bottlenecks and barriers to further development of AM technologies in Europe. Furthermore the stakeholders also need to be mobilised in order to exploit the business opportunities that AM provides, facilitating the take-up of this technology in Europe, with a focussed promotion and support strategy for Additive Manufacturing...
ver más
Specific Challenge:Additive Manufacturing (AM), including 3D-Printing, is one of the potential game changers that, for some applications, has already reached a tipping point of maturity. European companies are still strong in some areas but this position requires high levels of continuous innovation, especially where competitors are fast approaching. There are also other areas that are comparatively less developed and where the technology transfer and adoption is not functional, leading to a slow uptake of the results.
Despite the EC support, in the global picture the competitiveness of the European companies is threatened by important investments at international level. Moreover, some of the more fundamental aspects in order to take advantage of this promising technology still need to be addressed.
It is necessary to identify current bottlenecks and barriers to further development of AM technologies in Europe. Furthermore the stakeholders also need to be mobilised in order to exploit the business opportunities that AM provides, facilitating the take-up of this technology in Europe, with a focussed promotion and support strategy for Additive Manufacturing technologies.
Scope:The proposals should address most of the following aspects:
Identification of gaps and opportunities for further research and innovation, as well as non-technological gaps in order to develop policy framework recommendations (e.g. regulation, standardisation, public procurement). Community building activities (think-and-do-tank) and actions to foster dialogue and collaboration across levels (stakeholders and governance) and with key strategic partners, the Member States and the European Commission. This broad multi-stakeholder community (science, policy, business, society) at local, regional, national and EU level will enable the launching of innovation partnerships for developing and testing of AM. Assessment of the current regulatory and IPR frameworks, micro- and macro-economic assessment of opportunities and risks and its impact on social aspects and labour market benefits. Productivity and resource efficiency gains through AM and its impact on European competitiveness through localised manufacturing, where more goods will be manufactured on demand, individually designed and close to their point of consumption. Identification of current bottlenecks for the transferability of new technologies across sectors. Development of best practices to help stakeholders to achieve large scale deployment. Identification of bottlenecks that prevent the stimulation of investments in new AM technologies and promote successful innovative AM solutions. Support information exchange and collaboration between EU funded projects which address the same AM areas to exploit synergies, particularly through SMEs. Development of new integrated design and manufacturing paradigms, where the time to replan, reprogramme and evolve in the shop floor production is reduced. Building skills capacity for innovation and competitiveness, engaging with academia for the development of learning resources adaptable to different learning approaches and curricula at undergraduate, master, and life-long learning levels. Assesment of the current regulatory and IPR frameworks; anti-counterfeiting features, particularly where high value and/or safety critical components are being manufactured; micro- and macro-economic assessment of opportunities and risks; and its impact on social aspects and labour market benefits. Proposals should include the organisation of workshops with top-ranked international experts and EC services from the various disciplines aiming at the elaboration of a future AM roadmap, as well as an International Conference on AM at the end of the project.
In order to ensure the industrial relevance and impact of the research effort, the active participation of industrial partners represents an added value to the activities and this will be reflected in the evaluation, under the criteria Implementation and Impact.
The Commission considers that proposals requesting a contribution from the EU between EUR 750000 and 1000000 would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
No more than one action will be funded.
Expected Impact: The proposals are expected to have an impact on the European AM community in the following ways: Create a network of research and industry partners for further RTD and industrial innovation and contribute to the sharing of European best practices. Create links and foster collaboration with relevant European initiatives and activities, e.g. Additive Manufacturing Platform within the ManuFuture ETP and the Vanguard Initiative. Speeding up industrial exploitation and take up of results of AM and facilitate cross-sectorial technology transfer. Early awareness of key innovation developments and anticipation of business trends and market prospects. Training and educational skills capacity in the AM community, both at academic and professional level. Enabling regulatory authorities to address better the relevant issues based on a thorough assessment of the current legal framework, IPR management and standardisation needs. Rationalising the process to deliver standardisation mandates to the European Standards Organisations. Favour investment of financial players in additive technologies application.
Cross-cutting Priorities:Contractual Public-Private Partnerships (cPPPs)FoF
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
LIST OF COUNTRIES and APPLICABLE RULES FOR FUNDING
described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to China, Japan, Republic of Korea, Mexico, Russia, Taiwan).
ELIGIBILITY and ADMISSIBILITY CONDITIONS
described in part B and C of the General Annexes of the General Work Programme.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
EVALUATION
3.1 Evaluation criteria and procedure, scoring and threshold:
described in part H of the General Annexes of the General Work Programme, with the following exceptions:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4.
The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
LIST OF COUNTRIES and APPLICABLE RULES FOR FUNDING
described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to China, Japan, Republic of Korea, Mexico, Russia, Taiwan).
ELIGIBILITY and ADMISSIBILITY CONDITIONS
described in part B and C of the General Annexes of the General Work Programme.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
EVALUATION
3.1 Evaluation criteria and procedure, scoring and threshold:
described in part H of the General Annexes of the General Work Programme, with the following exceptions:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4.
The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except, when comparing ex aequo proposals of different topics, the proposals will be ranked first according to the position in the topic ranked lists.
3.2 Submission and evaluation process: Guide to the submission and evaluation process
INDICATIVE TIMETABLE for EVALUATION and GRANT AGREEMENT
Information on the outcome of single-stage evaluation: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
PROVISIONS, PROPOSAL TEMPLATES and EVALUATION FORMS
for the type of action under this topic
Coordination and Support Action:
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
H2020 General MGA -Multi-Beneficiary
Annotated Grant Agreement
ADDITIONAL PROVISIONS
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
OPEN ACCESS
must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
ADDITIONAL DOCUMENTS
Legal basis: Horizon 2020 - Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme
H2020 Work Programme 2016-17: Introduction
H2020 Work Programme 2016-17: Introduction to Leadership in enabling and industrial technologies (LEITs)
H2020 Work Programme 2016-17: Nanotechnologies, advanced materials, advanced manufacturing and processing, biotechnology
H2020 Work Programme 2016-17: Cross-cutting activities (Focus Areas)
H2020 Work Programme 2016-17: Dissemination, Exploitation and Evaluation
H2020 Work Programme 2016-17: General Annexes
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta