Innovating Works
FoF-07-2014
FoF-07-2014: Support for the enhancement of the impact of FoF PPP projects
Scope:Specific challenge:Dissemination, exploitation and transfer of projects results are crucial activities during project life-time and beyond in order to make sure that projects have the expected impacts. Clustering of project activities, according to objectives and addressed themes, and their inter-linking with existing technology transfer activities, are effective ways to stimulate the take-up of project results and to exploit synergies. An adequate monitoring of such activities during the project life-time and beyond is also needed, to ensure an effective implementation at programme level.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 20-03-2014.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Scope:Specific challenge:Dissemination, exploitation and transfer of projects results are crucial activities during project life-time and beyond in order to make sure that projects have the expected impacts. Clustering of project activities, according to objectives and addressed themes, and their inter-linking with existing technology transfer activities, are effective ways to stimulate the take-up of project results and to exploit synergies. An adequate monitoring of such activities during the project life-time and beyond is also needed, to ensure an effective implementation at programme level.

Scope: The coordination actions shall aim in particular to actively cluster existing activities under the FoF PPP. The initiative, which is expected to last 2 years, will require close collaboration with relevant industrial associations and technology transfer programmes.

Activities may include: 

                Reviews of recent technological developments, publications, international RTD and innovation programmes within the technological area of the cluster

                Workshops with top-ranked international experts from various dis... ver más

Scope:Specific challenge:Dissemination, exploitation and transfer of projects results are crucial activities during project life-time and beyond in order to make sure that projects have the expected impacts. Clustering of project activities, according to objectives and addressed themes, and their inter-linking with existing technology transfer activities, are effective ways to stimulate the take-up of project results and to exploit synergies. An adequate monitoring of such activities during the project life-time and beyond is also needed, to ensure an effective implementation at programme level.

Scope: The coordination actions shall aim in particular to actively cluster existing activities under the FoF PPP. The initiative, which is expected to last 2 years, will require close collaboration with relevant industrial associations and technology transfer programmes.

Activities may include: 

                Reviews of recent technological developments, publications, international RTD and innovation programmes within the technological area of the cluster

                Workshops with top-ranked international experts from various disciplines aiming at the elaboration of future FoF priorities within the technological area of the cluster.

The Commission considers that proposals requesting a contribution from the EU between EUR 250 000 and 300 000 would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.

Expected impact:

The impact on the areas of application of the projects is expected to be:

                Speeding up industrial exploitation and take up of results of FoF PPP projects.

                Stimulation of networks and alliances for further RTD and industrial innovation in the addressed technology and application areas, including the development and practical application of a clustering model.

                Added value beyond the original scope of the FoF PPP projects by exploiting synergies and sharing best practice. Increased public presence and awareness of FoF PPP activities.

                More effective execution of activities of common interest, such as IPR management and standardisation.

                Anticipation of business trends and market prospects.

Type of action: Coordination and Support Actions


Cross-cutting Priorities:Contractual Public-Private Partnerships (cPPPs)FoF


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Scope:Specific challenge:Dissemination, exploitation and transfer of projects results are crucial activities during project life-time and beyond in order to make sure that projects have the expected impacts. Clustering of project activities, according to objectives and addressed themes, and their inter-linking with existing technology transfer activities, are effective ways to stimulate the take-up of project results and to exploit synergies. An adequate monitoring of such activities during the project life-time and beyond is also needed, to ensure an effective implementation at programme level. Scope:Specific challenge:Dissemination, exploitation and transfer of projects results are crucial activities during project life-time and beyond in order to make sure that projects have the expected impacts. Clustering of project activities, according to objectives and addressed themes, and their inter-linking with existing technology transfer activities, are effective ways to stimulate the take-up of project results and to exploit synergies. An adequate monitoring of such activities during the project life-time and beyond is also needed, to ensure an effective implementation at programme level.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Amortizaciones.
Activos.
Otros Gastos.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Please read carefully all provisions below before the preparation of your application.
1. List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
 
2. Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
 
3. EVALUATION
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
 
4. Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
5. Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
  Please read carefully all provisions below before the preparation of your application.
1. List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
 
2. Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
 
3. EVALUATION
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
 
4. Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
5. Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
 
6. Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Coordination and Support Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical annex)
Standard evaluation form
Annotated Model Grant Agreement
 
7. Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
 
8. Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
 
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-FoF-2014-2015 Support for the enhancement of the impact of FoF PPP projects Scope:Specific challenge:Dissemination, exploitation and transfer of projects results are crucial activities during project life-time and be...
Sin info.
DT-FOF-05-2019 Open Innovation for collaborative production engineering (IA)
en consorcio:
Cerrada hace 2 años | Próxima convocatoria prevista para el mes de
DT-FOF-11-2020 Quality control in smart manufacturing (IA)
en consorcio: Specific Challenge:Smart factories are characterised by processes involving interlinked work pieces and associated tools as well as logistic...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
DT-FOF-07-2020 Assembly of micro parts (RIA)
en consorcio: Specific Challenge:Miniaturisation leads to new functionalities, weight reduction and energy and material saving. European industry has curr...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
DT-FOF-10-2020 Pilot lines for large-part high-precision manufacturing (IA 50%)
en consorcio: Specific Challenge:The production of large-scale parts has achieved so far a relatively low level of mechanisation and automation because st...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
DT-FOF-09-2020 Energy-efficient manufacturing system management (IA)
en consorcio: Specific Challenge:Improving industrial energy efficiency requires the integration of energy data, such as historical data, real-time data a...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de