HORIZON EUROPE
Europeo
Scope:Specific challenge: Obtaining simple fuel cell systems to maintain and compliant with all regulatory requirements is a significant step towards mass markets for technologies that have so far mostly been driven by engineers and scientists. Those features are required to value the large advantages on performances (e.g. electrical efficiency) and to remove obstacles for the commercialization of fuel cells generators and co-generators.
Integrating first lessons from field operation and the conceptual elaboration of lean after-sale structures for fuel cell technologies that differ significantly from incumbent technologies need to be addressed.
Scope: The main objective of this topic is adaption of the existing FC-based appliances or a core part (stack module, reformer module) by using a Design-to-Service approach, in a way to significantly improve at least 3 of the following 5 objectives:
• Reduce the service cost, including any spare part required, to meet the end-user requirements for the specific application (frequency of intervention, duration of intervention, availability of appliance, cost)
• Simpl...
ver más
Scope:Specific challenge: Obtaining simple fuel cell systems to maintain and compliant with all regulatory requirements is a significant step towards mass markets for technologies that have so far mostly been driven by engineers and scientists. Those features are required to value the large advantages on performances (e.g. electrical efficiency) and to remove obstacles for the commercialization of fuel cells generators and co-generators.
Integrating first lessons from field operation and the conceptual elaboration of lean after-sale structures for fuel cell technologies that differ significantly from incumbent technologies need to be addressed.
Scope: The main objective of this topic is adaption of the existing FC-based appliances or a core part (stack module, reformer module) by using a Design-to-Service approach, in a way to significantly improve at least 3 of the following 5 objectives:
• Reduce the service cost, including any spare part required, to meet the end-user requirements for the specific application (frequency of intervention, duration of intervention, availability of appliance, cost)
• Simplify the service operation in a way that normally trained installers/technicians can accomplish the task by using the appliance “service manual” and the standard tools
• Reduce the on-site technical intervention time
• Reduce the total down-time of equipment for servicing
• Increase the service interval time
The first installation and start-up of the system is considered as part of the proposal.
Expected impact: The project must meet the following targets in its respective market segment:
• Micro-CHP and small generator appliances (1-10 kW):
- service cost < 600 €/kW per year (including stack and any other hot components)
- provide guidelines for writing service manuals that are easily understandable for maintenance technicians
- service time requiring < 4h presence time of maintenance technician
- total down-time of equipment for servicing < 48 hours
- service interval: more than 1 year
• Mid-scale power equipment (10-200 kW):
- service cost < 550€/kW per year (with ref. 1000€/kW stack material cost)
- provide guidelines for writing service manuals that are easily understandable for maintenance technicians
- service time requiring < 8h presence time of maintenance technician
- total down-time of equipment for servicing < 2 days
- service interval more than 1-2 years
• Large-scale power generators (>200 kW):
- service cost < 290 €/kW per year (full service including output guarantee)
- provide guidelines for writing service manuals that are easily understandable for maintenance technicians
- service time requiring < 300 h presence time of maintenance technician per year
- total down-time of the plant for servicing < 440 hours per year
- service interval: more than 2 years without shut down, every 18 months electrical BOP with shutdown
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
Indicative funding: The FCH 2 JU considers that proposals requesting a contribution from the EU of EUR 1.5 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Number of projects: a maximum of 3 projects may be supported under this topic, with one project maximum per fuel cell technology.
Expected duration: 3 years
Type of action: Innovation Action
Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the FCH2 JU Work Plan 2014.
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the FCH2 JU Work Plan 2014.
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part E of the General Annexes of the FCH2 JU Work Plan 2014.
3.2 FCH2 Guide for applicants on submission and evaluation
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature o... Other Information: The activities are expected to be implemented at TRL 6-7.
Indicative funding: The FCH 2 JU considers that proposals requesting a contribution from the EU of EUR 1.5 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Number of projects: a maximum of 3 projects may be supported under this topic, with one project maximum per fuel cell technology.
Expected duration: 3 years
Type of action: Innovation Action
Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the FCH2 JU Work Plan 2014.
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the FCH2 JU Work Plan 2014.
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part E of the General Annexes of the FCH2 JU Work Plan 2014.
3.2 FCH2 Guide for applicants on submission and evaluation
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Information on the outcome of two-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
FCH2 Innovation Action (FCH2-IA):
Specific provisions and funding rates: described in part D of the General Annexes of the FCH2 JU Work Plan 2014.
Standard proposal template
Standard evaluation form
FCH2 Model Grant Agreement
H2020 Annotated Model Grant Agreement
Additional provisions:
Technology readiness levels (TRL): described in part E of the General Annexes of the FCH2 JU Work Plan 2014.
Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
FCH2 additional documents:
FCH2 JU Vademecum/rules for proposals submission and evaluation
FCH2 JU Work Plan 2014
FCH2 JU Multi Annual Work Plan
FCH2 JU – Regulation of establishment
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta