HORIZON EUROPE
Europeo
Specific Challenge:Laser-based manufacturing has become very competitive and is one of the back-bones of modern production technologies. Highly accurate mass production is available for a wide range of products in a wide range of industries. Whilst laser processing is highly flexible, the change from one production lot to the next usually requires operator intervention, reconfigurations and costly down times to adjust current processing tools to the new task. The trend to individualisation requires a high degree of digitization as well as tools and systems which are highly autonomous and automated to reduce production time and costs.
Additive manufacturing (AM) offers a number of advantages over conventional manufacturing including the unprecedented freedom of design for example in terms of geometry, material composition and intrinsic properties of the work piece. Whilst laser-based AM is used for prototyping and has begun to penetrate some smaller markets, it is not yet competitive on a larger scale especially with respect to production speed and costs. In order to increase the productivity of laser-based AM and to bring it a significant step further towards industria...
ver más
Specific Challenge:Laser-based manufacturing has become very competitive and is one of the back-bones of modern production technologies. Highly accurate mass production is available for a wide range of products in a wide range of industries. Whilst laser processing is highly flexible, the change from one production lot to the next usually requires operator intervention, reconfigurations and costly down times to adjust current processing tools to the new task. The trend to individualisation requires a high degree of digitization as well as tools and systems which are highly autonomous and automated to reduce production time and costs.
Additive manufacturing (AM) offers a number of advantages over conventional manufacturing including the unprecedented freedom of design for example in terms of geometry, material composition and intrinsic properties of the work piece. Whilst laser-based AM is used for prototyping and has begun to penetrate some smaller markets, it is not yet competitive on a larger scale especially with respect to production speed and costs. In order to increase the productivity of laser-based AM and to bring it a significant step further towards industrial manufacturing a better mastering of all stages of the process chain and their interaction is necessary.
Scope:a. Research and Innovation Actions
From "design to piece" – Excellence in laser-based additive industrial manufacturing[1]: From Design to the final work piece, the topic addresses laser-based additive industrial manufacturing of metallic materials. All process chain steps may be addressed, for example CAD, modelling of the additive process, the additive process itself including the use of several materials in a single work piece, process control and quality assurance, the combination of additive and subtractive processes, surface finish and precision, etc. Materials for AM and their quality control are considered as a step. Proposals must cover at least two important steps in the process chain and the relevant links between them. The goal is to significantly improve the overall performance in terms of speed and costs whilst producing high quality work pieces. Standardisation aspects should also be addressed as appropriate. Proposals should be driven by concrete business cases and include the relevant partners of the value chain and proposals should contain an outline business case and industrial exploitation strategy, as outlined in the Introduction to the LEIT part of this Work Programme.
The Commission considers that proposals requesting a contribution from the EU between EUR 2 and 4 million would allow this area to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
b. Innovation Actions
Rapid individualised laser-based production: Develop and set-up efficient, highly flexible high throughput pilot facilities on the basis of existing processes for laser-based production and to validate them in real settings. This will require advances in a number of aspects, including intelligent networking and machine cooperation, data handling, modelling, work piece handling, beam delivery, integration of different processes, monitoring, process control etc. Actions must be industry driven and include the key stakeholders running the pilot facility. Proposals should contain an outline business case and industrial exploitation strategy.
The Commission considers that proposals requesting a contribution from the EU between EUR 2 and 4 million would allow this area to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Expected Impact:Proposals should describe how the proposed work will contribute to the following impact criteria and provide metrics, the baseline and targets to measure impact.
a. Research & Innovation Actions
Reinforced industrial leadership in laser-based Additive Manufacturing. Substantially improved production speed, improved productivity and substantially reduced costs of laser-based Additive Manufacturing. b. Innovation Actions
More efficient, more flexible and higher throughput of individualised laser-based production. Improved competiveness and strengthened Europe's market position of laser-based manufacturing industry (equipment and suppliers) and the end-user industry.
Cross-cutting Priorities:Contractual Public-Private Partnerships (cPPPs)FoFCross-cutting Key-Enabling Technologies (KETs)
[1]Theme a. is complementing the topic RTD-FOF1-2016
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to China, Japan, Republic of Korea, Mexico, Russia, Taiwan).
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme with the following exceptions:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2&n... Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to China, Japan, Republic of Korea, Mexico, Russia, Taiwan).
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme with the following exceptions:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Submission and evaluation process: Guide to the submission and evaluation process
Indicative timetable for evaluation and grant agreement:
Information on the outcome of single-stage evaluation: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template
Specific evaluation form (not available yet)
H2020 General MGA -Multi-Beneficiary
Annotated Grant Agreement
Innovation Action:
Specific provisions and funding rates
Standard proposal template
Specific evaluation form (not available yet)
H2020 General MGA -Multi-Beneficiary
Annotated Grant Agreement
Additional provisions:
Horizon 2020 budget flexibility
Classified information
Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Additional information:
H2020 Work Programme 2016-17: Introduction
H2020 Work Programme 2016-17: Cross-cutting activities (Focus Areas)
H2020 Work Programme 2016-17: Dissemination, Exploitation and Evaluation
H2020 Work Programme 2016-17: General Annexes
Legal basis: Horizon 2020 - Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta