Innovating Works
PILOTS-05-2017
PILOTS-05-2017: Paper-based electronics
Specific Challenge:On one hand the lifetime of electronics is becoming shorter, now approaching an average in the range of months; this evolution generates technological challenges and poses a growing ecological problem. On the other hand, paper is ubiquitous in everyday life and it is one of the cheapest materials in our society. It is renewable, portable, flexible and in addition cellulose, its main component, is the Earth’s major biopolymer and has an essential economic importance in Europe, which is responsible for 30% of the world’s total production. Paper Electronics represents a new concept which combines the use of paper as a functional part of electronic components or devices. Typical applications include packaging, graphics, novel diagnostic systems and hygiene products for indicating product safety or freshness, support logistics, health-care and safety for example.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 27-10-2016.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Specific Challenge:On one hand the lifetime of electronics is becoming shorter, now approaching an average in the range of months; this evolution generates technological challenges and poses a growing ecological problem. On the other hand, paper is ubiquitous in everyday life and it is one of the cheapest materials in our society. It is renewable, portable, flexible and in addition cellulose, its main component, is the Earth’s major biopolymer and has an essential economic importance in Europe, which is responsible for 30% of the world’s total production. Paper Electronics represents a new concept which combines the use of paper as a functional part of electronic components or devices. Typical applications include packaging, graphics, novel diagnostic systems and hygiene products for indicating product safety or freshness, support logistics, health-care and safety for example.

Paper-based electronics shows promising technical, economic, and environmental advantages which will allow new recyclable electronics devices like paper displays, smart labels, smart packaging, bio-and medical applications, PoC devices, RFID tags, disposable electrochemical sensors among others.... ver más

Specific Challenge:On one hand the lifetime of electronics is becoming shorter, now approaching an average in the range of months; this evolution generates technological challenges and poses a growing ecological problem. On the other hand, paper is ubiquitous in everyday life and it is one of the cheapest materials in our society. It is renewable, portable, flexible and in addition cellulose, its main component, is the Earth’s major biopolymer and has an essential economic importance in Europe, which is responsible for 30% of the world’s total production. Paper Electronics represents a new concept which combines the use of paper as a functional part of electronic components or devices. Typical applications include packaging, graphics, novel diagnostic systems and hygiene products for indicating product safety or freshness, support logistics, health-care and safety for example.

Paper-based electronics shows promising technical, economic, and environmental advantages which will allow new recyclable electronics devices like paper displays, smart labels, smart packaging, bio-and medical applications, PoC devices, RFID tags, disposable electrochemical sensors among others. Paper-based electronics represents a promising source of innovation and growth for sectors such as packaging industry which develops smart solutions able to interact with the end users or classic paper publishing industry which are facing challenges from electronic books and journals, healthcare industry which intensify the development of quantitative biosensing, microfluidic and lab-on-chip devices.


Scope:The proposal should address the physical, chemical and engineering challenges linked with the use of paper as substrate as well as active components of the electronic devices: it includes the development on new technologies for paper manufacturing (fiber enhancement, porosity, fillers, etc) and converting, new paper coatings (organic, inorganic or hybrid), paper surface characteristics and functionalization (nanocellulose functionalization, plasma or gas treatments, bio and chemical modifications for instance) but also heterogeneous integration of high-added value electronic components on paper and introduction of new materials (conductors, semiconductors, insulators, electrochromic, batteries electrodes). The proposal should develop high-precision, cost efficient, and high output printing or other manufacturing technologies on large area (inkjet, screen printing amongst others, and sheet-to-sheet or roll-to-roll processes). The proposal should also address recyclability and eco-design aspects.

The implementation of this topic is intended to start at TRL 3 and target TRL 5.

This topic addresses cross-KET activities.

The Commission considers that proposals requesting a contribution from the EU between EUR 5 and 8 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.


Expected Impact: To develop a new disruptive and sustainable paper-based platforms for electronics that not only integrate discrete devices but also use the cellulose as an electronic material for insulators, electrolytes, conductors, and semiconductors; To use the same paper substrate that supports the electronics to also drive a bioplatform or a display, process source video data, or provide the power source through an embedded chemical battery; Reduce the environmental impact of electronics; Consolidate paper making industries and wood-harvesting industries; In long term, the developed technologies should pave the way for active, full color, video-rate reflective displays that perform well in high-light conditions, achieving performance equivalent to classical electronics (i.e. for display devices, a contrast ratio from 10:1, reflectivity of over 80%, full color, etc.); Creation of new markets and new business opportunities for the European industry fulfilling or anticipating consumer needs in this area. Proposals should include a business case and exploitation strategy, as outlined in the Introduction to the LEIT part of this Work Programme.


Cross-cutting Priorities:Cross-cutting Key-Enabling Technologies (KETs)


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Specific Challenge:On one hand the lifetime of electronics is becoming shorter, now approaching an average in the range of months; this evolution generates technological challenges and poses a growing ecological problem. On the other hand, paper is ubiquitous in everyday life and it is one of the cheapest materials in our society. It is renewable, portable, flexible and in addition cellulose, its main component, is the Earth’s major biopolymer and has an essential economic importance in Europe, which is responsible for 30% of the world’s total production. Paper Electronics represents a new concept which combines the use of paper as a functional part of electronic components or devices. Typical applications include packaging, graphics, novel diagnostic systems and hygiene products for indicating product safety or freshness, support logistics, health-care and safety for example. Specific Challenge:On one hand the lifetime of electronics is becoming shorter, now approaching an average in the range of months; this evolution generates technological challenges and poses a growing ecological problem. On the other hand, paper is ubiquitous in everyday life and it is one of the cheapest materials in our society. It is renewable, portable, flexible and in addition cellulose, its main component, is the Earth’s major biopolymer and has an essential economic importance in Europe, which is responsible for 30% of the world’s total production. Paper Electronics represents a new concept which combines the use of paper as a functional part of electronic components or devices. Typical applications include packaging, graphics, novel diagnostic systems and hygiene products for indicating product safety or freshness, support logistics, health-care and safety for example.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Amortizaciones.
Activos.
Otros Gastos.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Please read carefully all provisions below before the preparation of your application.
 
LIST OF COUNTRIES and APPLICABLE RULES FOR FUNDING
described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to Australia, Brazil, Canada, China, Hong Kong &Macau, India, Japan, Republic of Korea, Mexico, Russia, Taiwan).
 
ELIGIBILITY and ADMISSIBILITY CONDITIONS
described in part B and C of the General Annexes of the General Work Programme.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
EVALUATION
3.1  Evaluation criteria and procedure, scoring and threshold:
The criteria, scoring and threshold are described in General Annex H of the work programme.
The following exceptions apply:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
The procedure for setting a priority order for proposals with the same score is given in General Annex H of the work programme. The following exceptions apply:
Under 3 (a)
Propo...
Please read carefully all provisions below before the preparation of your application.
 
LIST OF COUNTRIES and APPLICABLE RULES FOR FUNDING
described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to Australia, Brazil, Canada, China, Hong Kong &Macau, India, Japan, Republic of Korea, Mexico, Russia, Taiwan).
 
ELIGIBILITY and ADMISSIBILITY CONDITIONS
described in part B and C of the General Annexes of the General Work Programme.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
EVALUATION
3.1  Evaluation criteria and procedure, scoring and threshold:
The criteria, scoring and threshold are described in General Annex H of the work programme.
The following exceptions apply:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
The procedure for setting a priority order for proposals with the same score is given in General Annex H of the work programme. The following exceptions apply:
Under 3 (a)
Proposals are first ranked in separate lists according to the topics against which they were submitted (‘topic ranked lists’). When comparing ex aequo proposals from different topics, proposals having a higher position in their respective 'topic ranked list' will be considered to have a higher priority in the overall ranked list.
Under 3 (b)
For all topics and types of action, the prioritisation will be done first on the basis of the score for Impact, and then on that for Excellence.
3.2 Submission and evaluation process: Guide to the submission and evaluation process
      
INDICATIVE TIMETABLE for EVALUATION and GRANT AGREEMENT
Information on the outcome of two-stage evaluation:
      For stage 1: maximum 3 months from the deadline for submission.
      For stage 2: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
 
PROVISIONS, PROPOSAL TEMPLATES and EVALUATION FORMS
for the type of action under this topic
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
H2020 General MGA -Multi-Beneficiary
Annotated Grant Agreement
 
ADDITIONAL PROVISIONS
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
 
OPEN ACCESS
Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in annex L of the Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
- Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs.
- Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
 
ADDITONAL DOCUMENTS
Legal basis: Horizon 2020 - Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme
H2020 Work Programme 2016-17: Introduction
H2020 Work Programme 2016-17: Introduction to Leadership in enabling and industrial technologies (LEITs)
H2020 Work Programme 2016-17: Nanotechnologies, advanced materials, advanced manufacturing and processing, biotechnology
H2020 Work Programme 2016-17: Cross-cutting activities (Focus Areas)
H2020 Work Programme 2016-17: Dissemination, Exploitation and Evaluation
H2020 Work Programme 2016-17: General Annexes
 
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-IND-CE-2016-17 Paper-based electronics Specific Challenge:On one hand the lifetime of electronics is becoming shorter, now approaching an average in the range of months; this evol...
Sin info.
PILOTS-04-2017 Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS
en consorcio: Specific Challenge:Microfluidics devices were initially based on non-polymeric materials like silicon or glass, manufactured in facilities d...
Cerrada hace 8 años | Próxima convocatoria prevista para el mes de
PILOTS-03-2017 Pilot Lines for Manufacturing of Nanotextured surfaces with mechanically enhanced properties
en consorcio: Specific Challenge:Nanostructured coatings or nanotextured surfaces provide improved scratch and abrasion resistance, super hardness and mec...
Cerrada hace 8 años | Próxima convocatoria prevista para el mes de
PILOTS-05-2017 Paper-based electronics
en consorcio: Specific Challenge:On one hand the lifetime of electronics is becoming shorter, now approaching an average in the range of months; this evol...
Cerrada hace 8 años | Próxima convocatoria prevista para el mes de
PILOTS-01-2016 Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties
en consorcio: Specific Challenge:Advanced functional materials with customized thermal/electrical conductivity properties provide new opportunities in man...
Cerrada hace 9 años | Próxima convocatoria prevista para el mes de
PILOTS-02-2016 Pilot Line Manufacturing of Nanostructured Antimicrobial Surfaces using Advanced Nanosurface Functionalization Technologies
en consorcio: Specific Challenge:Infections by pathogenic microorganisms adhering on various surfaces kill worldwide more people than any other single cau...
Cerrada hace 9 años | Próxima convocatoria prevista para el mes de