Innovating Works

HORIZON EUROPE

Próximamente
HORIZON-CL5-2024-D3-02-08
Minimisation of environmental, and optimisation of socio-economic impacts in the deployment, operation and decommissioning of offshore wind farms
ExpectedOutcome:If the project is on the first action 1) than the project results are expected to contribute to at least three of the outcomes a), b), and c). If the project is on the second action 2) than the project results is expected to contribute at least two of the outcomes a), b) and d)
Sólo fondo perdido | 5.0M €
Europeo
Convocatoria Cerrada, abrirá próximamente Esta línea está cerrada pero tiene previsto abrir para septiembre 2024.
Esta ayuda tiene 13 convocatoria(s) más que puedes consultar.
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:If the project is on the first action 1) than the project results are expected to contribute to at least three of the outcomes a), b), and c). If the project is on the second action 2) than the project results is expected to contribute at least two of the outcomes a), b) and d)

Enhanced sustainability by addressing economic, social and environmental aspects (air pollution, waste management, health and safety, job opportunities, wildlife concerns, etc.) of offshore wind farms (a).Enhanced overall sustainability of large-scale production of offshore wind farms based on mainstreamed Life Cycle Analysis addressing social, economic and environmental aspects, as well as improved circularity of offshore wind turbines (b).Improved understanding on the negative and positive impacts of offshore wind farms throughout their lifetime (c).Innovative and cost-effective solutions for the construction and decommissioning of offshore wind farms aiming also the minimisation of the potential impacts to biodiversity and protected species and habitats (d).
Scope:The aim is to develop and promote the use of modelling tools and objective holistic assessment metrics for... ver más

ExpectedOutcome:If the project is on the first action 1) than the project results are expected to contribute to at least three of the outcomes a), b), and c). If the project is on the second action 2) than the project results is expected to contribute at least two of the outcomes a), b) and d)

Enhanced sustainability by addressing economic, social and environmental aspects (air pollution, waste management, health and safety, job opportunities, wildlife concerns, etc.) of offshore wind farms (a).Enhanced overall sustainability of large-scale production of offshore wind farms based on mainstreamed Life Cycle Analysis addressing social, economic and environmental aspects, as well as improved circularity of offshore wind turbines (b).Improved understanding on the negative and positive impacts of offshore wind farms throughout their lifetime (c).Innovative and cost-effective solutions for the construction and decommissioning of offshore wind farms aiming also the minimisation of the potential impacts to biodiversity and protected species and habitats (d).
Scope:The aim is to develop and promote the use of modelling tools and objective holistic assessment metrics for realistic in-depth analysis of (cumulative) impacts of wind installations on the environment and on local communities and to integrate these in design tools for the deployment and decommissioning of offshore wind farms. It will be as well necessary to find innovative solutions to minimize the environmental impact during all stages of the life cycle of offshore wind farms but especially for the construction and decommissioning phase. An assessment framework for installations is needed with nature inclusive design options valuing ‘created habitats’ vs ‘natural habitats’.

The actions are expected to address one of the following actions:

Action 1: develop design tools which can be used for the planning of offshore floating and fixed-bottom wind farms with the focus to minimize the overall life-cycle environmental impacts (noise, impact on seabed, visual effect, effects on marine life and other species) including floating turbines (e.g. the environmental impacts of fixing/anchoring techniques), reducing carbon footprint of the offshore wind plants across the life cycle, from construction to end of life and reduce the environmental impact in each consecutive step. The tool should make use of existing data of environmental impact studies and should be easy to customise considering different sea basin biodiversity characteristics and new available data. For that reason, a strong participation/commitment of industry players is required to ensure that inventory data from industry of the components is used in the analyses and validation of the tools. The action will deliver recommendations for implementable, simple and measurable criteria to assess at the tendering stage of future project, considering the sustainability and environmental (positive and negative) impacts of offshore wind farms.

Action 2) develop innovative and cost-effective solutions (innovative processes, planning processes, supply chains, materials for construction, ….) for all phases of the life cycle of offshore wind farms but especially for the installation, construction and decommissioning phase of offshore wind farms with the aim to reduce the environmental impact as much as possible in these stages of the life cycle of offshore wind farms.

In order to increase the integration of the design tools and the innovative solutions, it is important that consortia engage all different stakeholders like regulatory bodies, industry, governments and citizens.

This R&I need is identified in the offshore renewable energy strategy (COM(2020) 741 final) that commits the Commission to ‘carry out an analysis of costs and impacts of the decommissioning of offshore installations, with a view to assessing whether, both for the dismantling of the existing installations and for future decommissioning activities, EU-wide legal requirements are needed to minimise environmental, safety, economic impacts’.


Specific Topic Conditions:Activities are expected to achieve TRL 5 by the end of the project – see General Annex B.




ver menos

Temáticas Obligatorias del proyecto: Temática principal: The text outlines the expected outcomes of projects focused on offshore wind farms, emphasizing enhanced sustainability, improved understanding of impacts, and innovative solutions for construction and decommissioning. The projects aim to address environmental, social, and economic aspects, integrating holistic assessments and nature-inclusive design options to minimize negative impacts.

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:
Empresas Micro, Pequeña, Mediana, Grande
Centros Tecnológicos
Universidades
Organismos públicos

Características del Proyecto

Requisitos de diseño: Presupuesto: *Presupuesto para cada participante en el proyecto Requisitos técnicos: - economic, social, and environmental aspects
- offshore wind farms
- Life Cycle Analysis
- circularity of offshore wind turbines
- impacts of offshore wind farms
- construction and decommissioning solutions
- minimization of impacts to biodiversity and protected species
- modelling tools
- holistic assessment metrics
- cumulative impacts
- environmental impact studies
- floating and fixed-bottom wind farms
- carbon footprint reduction
- environmental impact reduction
- tendering stage criteria
- innovative and cost-effective solutions
- supply chains
- materials for construction
- regulatory bodies
- industry stakeholders
- decommissioning analysis
- EU-wide legal requirements
- TRL 5
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 4:. Es el primer paso para determinar si los componentes individuales funcionarán juntos como un sistema en un entorno de laboratorio. Es un sistema de baja fidelidad para demostrar la funcionalidad básica y se definen las predicciones de rendimiento asociadas en relación con el entorno operativo final. leer más.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
The funding rate for RIA projects is 100 % of the eligible costs for all types of organizations.
Condiciones: No existe condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
El presupuesto total de la convocatoria asciende a
Presupuesto total de la convocatoria.
Proyectos financiables en esta convocatoria.
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.
Certificado DNSH: Los proyectos presentados a esta línea deben de certificarse para demostrar que no causan perjuicio al medio ambiente. + info

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
Deducción I+D+i:
0% 25% 50% 75% 100%
La empresa puede aplicar deducciones fiscales en I+D+i de los gastos del proyecto y reducir su impuesto de sociedades. leer más