HORIZON EUROPE
Europeo
Scope:Specific challenge: High-tech products, including electric and electronic equipment, green energy technologies or extreme applications, contain substantial amounts of certain Critical Raw Materials (CRM). Although the amount of CRM per product in general is very low, the huge number of products manufactured makes the total amounts very impressive. The prices and availability of CRM varies in time. There is therefore a need to find alternative solutions to replace certain CRM in concrete applications, or to diversify the supply of raw materials sources. Substitution of CRMs can also increase the recyclability of waste products, allowing for more efficient processes and reduce environmental impacts.
This specific challenge is identified in the Priority Area 'Substitution of raw materials' of the European Innovation Partnership (EIP) on Raw Materials.
Scope: Proposals should develop solutions proving concept and feasibility at the level of TRL 3-5; please see part G of the General Annex.
Related environmental and safety risks should be assessed for all proposed actions.
The Commission considers that proposals requesti...
ver más
Scope:Specific challenge: High-tech products, including electric and electronic equipment, green energy technologies or extreme applications, contain substantial amounts of certain Critical Raw Materials (CRM). Although the amount of CRM per product in general is very low, the huge number of products manufactured makes the total amounts very impressive. The prices and availability of CRM varies in time. There is therefore a need to find alternative solutions to replace certain CRM in concrete applications, or to diversify the supply of raw materials sources. Substitution of CRMs can also increase the recyclability of waste products, allowing for more efficient processes and reduce environmental impacts.
This specific challenge is identified in the Priority Area 'Substitution of raw materials' of the European Innovation Partnership (EIP) on Raw Materials.
Scope: Proposals should develop solutions proving concept and feasibility at the level of TRL 3-5; please see part G of the General Annex.
Related environmental and safety risks should be assessed for all proposed actions.
The Commission considers that proposals requesting a contribution from the EU of between EUR 2 to 5 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Proposals shall address the following issue:
Materials under extreme conditions: development of innovative and sustainable solutions for the appropriate substitution of critical and scarce raw materials in applications under extreme conditions, such as substitution of CRM in heat resistant super alloys, in hard materials, critical alloying elements in bulk metals (steel, aluminium) or in corrosion resistant materials, targeting appropriately materials and applications that are difficult to recycle and where there are limited prospects to increase primary supply within the EU. Proposals should actively involve end users from a variety of concerned sectors, such as energy, transport, tooling or the process industry, and ensure synergies with existing relevant initiatives.
Expected impact: In the longer term pushing the EU to the forefront in the area of sustainable raw materials substitution. Improved competitiveness and creation of new jobs in materials producing and downstream industries, demonstrated by a return-on-investment study. Significant contribution to reduced dependency on CRMs in the medium term. Contribution to the large scale adoption of the new cost-effective technology in the EU, measured by quantitative and qualitative indicators. Availability of new materials with improved performance under extreme conditions and for electronic devices. Contribution to achieving the objectives of the EIP on Raw Materials.
Type of action: Research and innovation actions
Cross-cutting Priorities:Contractual Public-Private Partnerships (cPPPs)Y
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme.
3.2 Guide to the submission and evaluation process
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Information on the outcome of two-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical... Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme.
3.2 Guide to the submission and evaluation process
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Information on the outcome of two-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical annex)
Standard evaluation form
Annotated Model Grant Agreement
Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta