HORIZON EUROPE
Europeo
Scope:Specific challenge: When improving the level of energy performance of buildings in operation, embodied energy in materials presents an increasingly high percentage of the energy spent in the whole life cycle of a building. The same applies for CO2. Therefore, the development of new sustainable construction materials with lower embodied energy and lower CO2 emissions is needed. New approaches in material science and production technologies will help to minimize the embodied energy of the main construction materials such as concrete, glass, gypsum, ceramics or steel, involved in the structure, envelope and other building components of energy efficient buildings. At the same time, components with improved insulation and air tightness properties (which are influenced by construction tolerances) are needed, aiming at the overall target of reducing energy consumption and CO2 emission during the whole life cycle. Higher insulation can be achieved by improving bulk or surface properties in combination with novel mortars, plasters and coatings.
Scope: Proposals should address the development of new materials and/or solutions for building envelope components with reduced e...
ver más
Scope:Specific challenge: When improving the level of energy performance of buildings in operation, embodied energy in materials presents an increasingly high percentage of the energy spent in the whole life cycle of a building. The same applies for CO2. Therefore, the development of new sustainable construction materials with lower embodied energy and lower CO2 emissions is needed. New approaches in material science and production technologies will help to minimize the embodied energy of the main construction materials such as concrete, glass, gypsum, ceramics or steel, involved in the structure, envelope and other building components of energy efficient buildings. At the same time, components with improved insulation and air tightness properties (which are influenced by construction tolerances) are needed, aiming at the overall target of reducing energy consumption and CO2 emission during the whole life cycle. Higher insulation can be achieved by improving bulk or surface properties in combination with novel mortars, plasters and coatings.
Scope: Proposals should address the development of new materials and/or solutions for building envelope components with reduced embodied energy, lower CO2 emissions and improved insulation properties during operation. The new components may also contribute to improve indoor air quality, by limiting VOCs emissions and/or by advanced properties aiming to absorb and biodegrade indoor contaminants. The proposed solutions should go well beyond the state of the art and take into account the final performance properties of the new materials and of the respective building components.
The following factors should also be considered: enhanced durability for increased use duration, reduced maintenance and consequently reduced costs, respect of sustainability principles (the sustainability of each developed solution should be evaluated via life cycle assessment studies carried out according to the International Reference Life Cycle Data System - ILCD Handbook); application to both new build and renovation; lightweight construction and ease of installation; realistic solutions at a reasonable price; increased comfort and noise reduction. Recycling/reuse of materials may also be addressed. Standardisation aspects can be considered particularly in relation with the work carried out in CEN/TC 350.
Proof of concept in terms of one (or more) component(s) containing the new materials developed should be delivered within the project, excluding commercially usable prototypes (2006/C323/01), but convincingly demonstrating scalability towards industrial needs. Information guides for applications, installation and training on the new solutions should be provided before the end of the project. The participation of public authorities may also be an asset for the proposals, as public authorities own a large part of the building stock at European level.
To maximise their impact, the funded projects will be expected to cluster with each other in order to facilitate research cohesion, integration, and advancement of the EeB-PPP agenda.
For this topic, proposals should include an outline of the initial exploitation and business plans, which will be developed further in the proposed project.
Activities expected to focus on Technology Readiness Level 6 and above.
The Commission considers that proposals requesting a contribution from the EU between EUR 3 and 6 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Expected impact: Compared to state of the art materials and components, the newly developed materials should bring:
Reduction by at least 30% of the embodied energy and CO2 at component level;
Improvement by at least 20% of insulation properties;
Reduction by at least 15% of the total costs compared to existing solutions;
Demonstration of at least a 5% reduction of the energy spent during the whole life cycle of a building;
Improvement of the quality of information from product manufacturers to facilitate better decision making;
Strengthening of the competitiveness of the European construction sector in the field of “green” construction technologies.
Type of action: Innovation Actions.
Cross-cutting Priorities:Contractual Public-Private Partnerships (cPPPs)EeB
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
1. List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
2. Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
3. EVALUATION
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
4. Proposal page limits and layout: Please refer to Part B of the standard proposal template.
5. Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants... Please read carefully all provisions below before the preparation of your application.
1. List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
2. Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
3. EVALUATION
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
4. Proposal page limits and layout: Please refer to Part B of the standard proposal template.
5. Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
6. Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Innovation Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical annex)
Standard evaluation form
Annotated Model Grant Agreement
7. Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
8. Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta