HORIZON EUROPE
Europeo
Scope:Specific challenge:The manufacturing of customised products (e.g. consumer goods and medical devices) requires the development of new strategies integrating design with manufacturing and incorporating appropriate control methodologies to ensure small or large lot quantities which meet the specifications. Examples include new custom made parts or spare parts on demand either to sub-divisions of sectors/products or personalised to an individual as well as unique identification marking of products. New manufacturing processes and machines will need to be developed which are flexible at the local level to meet specific consumer demand and mass customisation where rapid translation between different specifications is required. In order to address customisation, advanced manufacturing processes(e.g. additive manufacturing or electrical discharge machining) need to enable processing of multi-materials, lightweight and high-strength materials or functionally graded materials, as well as more flexibility and rapid reconfiguring capabilities. For all customised manufacturing, it is necessary to have quick realisation from design to production in one process step as well as economic pro... ver más
Scope:Specific challenge:The manufacturing of customised products (e.g. consumer goods and medical devices) requires the development of new strategies integrating design with manufacturing and incorporating appropriate control methodologies to ensure small or large lot quantities which meet the specifications. Examples include new custom made parts or spare parts on demand either to sub-divisions of sectors/products or personalised to an individual as well as unique identification marking of products. New manufacturing processes and machines will need to be developed which are flexible at the local level to meet specific consumer demand and mass customisation where rapid translation between different specifications is required. In order to address customisation, advanced manufacturing processes(e.g. additive manufacturing or electrical discharge machining) need to enable processing of multi-materials, lightweight and high-strength materials or functionally graded materials, as well as more flexibility and rapid reconfiguring capabilities. For all customised manufacturing, it is necessary to have quick realisation from design to production in one process step as well as economic production systems down to single and small lot sizes.
Scope: Research activities should be multi-disciplinary and address several of the following areas:
- Development and integration of advanced design and manufacturing technologies able to transform such new product-service data descriptions and protocols into manufacturing operations and processes exploiting.
- Development of new machines and processes integrating advanced materials for the manufacturing of personalised parts and products.
- Seamless data integration across the process and supply chains for the fast production and distribution of custom made parts and products.
- Methodologies and tools for the management and running of effective value chains for the fast production and delivery of personalised products.
Activities expected to focus on Technology Readiness Level 4-6. A significant participation of SMEs with R&D capabilities is encouraged.
The Commission considers that proposals requesting a contribution from the EU between EUR 3 and 6 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Expected impact:
Increased capability to provide value added products/services and to rapidly follow the market dynamics by means of fast production and delivery of customised parts and products.
Reduction by 50% in the lead-time for manufacturing one new custom part with respect to current values for same requirements.
Cost reduction of personalised products manufacturing by 20%, by decreasing lead times in products and processes development and the time to market of customised parts and products by 30%.
Type of action: Research & Innovation Actions
Cross-cutting Priorities:Contractual Public-Private Partnerships (cPPPs)FoF
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Provisions,... Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical annex
Standard evaluation form
Annotated Model Grant Agreement
Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta