Innovating Works

HORIZON EUROPE

Próximamente
HORIZON-CL5-2024-D4-02-01
Industrialisation of sustainable and circular deep renovation workflows (Built4People Partnership)
ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:
Sólo fondo perdido | 8.0M €
Europeo
Convocatoria Cerrada, abrirá próximamente Esta línea está cerrada pero tiene previsto abrir para septiembre 2024.
Esta ayuda tiene otras 8 convocatoria(s) que puedes consultar.
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:

Streamlining resource-efficient nearly zero-energy performance renovation processes.Renovations with reduction of at least 30 % waste, 25% cost, and 30% work time (to 1-2 days per dwelling/building unit), compared to current deep renovation processes.Reduced energy performance gap between as-built and as-designed (difference between theoretical and measured performance), and higher construction quality.Innovative, tailored business models for deep renovation, generating economies of scale and contributing to an increased rate of renovation.Improved comfort, Indoor Air Quality and Indoor Environmental Quality.
Scope:In line with the Renovation Wave and in order to meet long-term climate and energy targets, more action is needed to increase the rate and depth of building renovation. Several recent projects and calls have focused on prefabrication for deep renovation, but more work is needed to develop innovative, seamless workflows from design to off-site prefabrication, to installation, construction on-site, maintenance and future dismantling, reuse and recyclin... ver más

ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:

Streamlining resource-efficient nearly zero-energy performance renovation processes.Renovations with reduction of at least 30 % waste, 25% cost, and 30% work time (to 1-2 days per dwelling/building unit), compared to current deep renovation processes.Reduced energy performance gap between as-built and as-designed (difference between theoretical and measured performance), and higher construction quality.Innovative, tailored business models for deep renovation, generating economies of scale and contributing to an increased rate of renovation.Improved comfort, Indoor Air Quality and Indoor Environmental Quality.
Scope:In line with the Renovation Wave and in order to meet long-term climate and energy targets, more action is needed to increase the rate and depth of building renovation. Several recent projects and calls have focused on prefabrication for deep renovation, but more work is needed to develop innovative, seamless workflows from design to off-site prefabrication, to installation, construction on-site, maintenance and future dismantling, reuse and recycling of prefabricated elements, duly considering life cycle performance, sustainability, and the potential to use the buildings as carbon sinks.

Proposals are expected to address all of the following:

Investigate innovative approaches for industrialised deep circular renovation, covering the whole workflow from design through to off-site prefabrication, installation, construction on-site and strategies for maintenance, operation and end of life.Ensure the proposed approaches aim to achieve the highest level of energy performance (at least NZEB level) with a view toward zero-emission buildings, ensuring a high level of indoor environment quality, keeping costs in an attractive range for owners and investors.Make use of innovative processes and technologies, including those delivered by previous research, such as design based on circularity principles, prefabricated components, and digital tools that allow to optimise workflows (cost, time, quality, resource use).Demonstrate a seamless integration of the proposed approaches with state-of-the-art digital technologies for construction and renovation (Building Information Modelling, Digital Twins, etc.).Select processes and technologies that can be easily tailored to give a maximum potential for rapid and broad deployment at European level.Investigate innovative business models (e.g. as-a-service models), accounting for potential market and regulatory barriers, in view of mass deployment and Europe-wide impact.Apply the proposed workflows to at least three demonstrations to assess the proposed approaches for different buildings typologies representative of the European building stock, ensuring the most adequate coverage of the respective climatic conditions. The demonstrations can be either single buildings or clusters of buildings, and at least one of the demonstrations has to address residential buildings.Contribute to the activities of the Built4People partners and to the Built4People network of innovation clusters. This topic implements the co-programmed European Partnership on ‘People-centric sustainable built environment’ (Built4People). As such, projects resulting from this topic will be expected to report on results to the European Partnership ‘People-centric sustainable built environment’ (Built4People) in support of the monitoring of its KPIs.


Specific Topic Conditions:Activities are expected to achieve TRL 6-8 by the end of the project – see General Annex B.




ver menos

Temáticas Obligatorias del proyecto: Temática principal: The expected outcomes of the project include streamlining resource-efficient nearly zero-energy renovation processes, reducing waste, cost, and work time, narrowing the energy performance gap, developing innovative business models for deep renovation, and enhancing comfort and indoor air quality. The focus is on industrialized deep circular renovation workflows with innovative technologies and business models for sustainable building practices.

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:
Empresas Micro, Pequeña, Mediana, Grande
Centros Tecnológicos
Universidades
Organismos públicos

Características del Proyecto

Requisitos de diseño: Presupuesto: *Presupuesto para cada participante en el proyecto Requisitos técnicos: The project is expected to streamline resource-efficient building renovation processes by reducing waste, cost, and work time significantly while enhancing construction quality and closing the energy performance gap. It aims to develop innovative business models for renovation, improve comfort and environmental quality, and achieve nearly zero-energy performance.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 6:. Representa un paso importante en demostrar la madurez de una tecnología. Se construye un prototipo de alta fidelidad que aborda adecuadamente las cuestiones críticas de escala, que opera en un entorno relevante, y que debe ser a su vez una buena representación del entorno operativo real. leer más.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities.
Condiciones: No existe condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
El presupuesto total de la convocatoria asciende a
Presupuesto total de la convocatoria.
Proyectos financiables en esta convocatoria.
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.
Certificado DNSH: Los proyectos presentados a esta línea deben de certificarse para demostrar que no causan perjuicio al medio ambiente. + info

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
Deducción I+D+i:
0% 25% 50% 75% 100%
La empresa puede aplicar deducciones fiscales en I+D+i de los gastos del proyecto y reducir su impuesto de sociedades. leer más