Innovating Works

HORIZON EUROPE

Próximamente
HORIZON-CL5-2024-D4-02-03
BIM-based processes and digital twins for facilitating and optimising circular energy renovation (Built4People Partnership)
ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:
Sólo fondo perdido | 4.0M €
Europeo
Convocatoria Cerrada, abrirá próximamente Esta línea está cerrada pero tiene previsto abrir para septiembre 2024.
Esta ayuda tiene otras 8 convocatoria(s) que puedes consultar.
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:

Reduced buildings construction and renovation time and costs.Increased buildings material reuse and recycling.Improvement of buildings performance (energy, sustainability including whole life-cycle carbon and the potential to store carbon in built works, comfort, health and well-being, and accessibility).Enhanced, interoperable and accessible buildings information across the lifecycle.Improvement of interoperability with existing Building Information Modelling (BIM) and Digital Twin solutions.Broader application of BIM and Digital Twin solutions, in particular within SMEs.
Scope:To improve Building Information Modelling and Digital Twinning over the full life cycle of buildings, including construction and renovation of buildings, towards enhanced energy efficiency and sustainability and in compliance with circular economy and resource efficiency principles.

Proposals are expected to address all of the following:

Develop and integrate solutions based on BIM and Digital Twins to support the whole buildings life cycle from design to decon... ver más

ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:

Reduced buildings construction and renovation time and costs.Increased buildings material reuse and recycling.Improvement of buildings performance (energy, sustainability including whole life-cycle carbon and the potential to store carbon in built works, comfort, health and well-being, and accessibility).Enhanced, interoperable and accessible buildings information across the lifecycle.Improvement of interoperability with existing Building Information Modelling (BIM) and Digital Twin solutions.Broader application of BIM and Digital Twin solutions, in particular within SMEs.
Scope:To improve Building Information Modelling and Digital Twinning over the full life cycle of buildings, including construction and renovation of buildings, towards enhanced energy efficiency and sustainability and in compliance with circular economy and resource efficiency principles.

Proposals are expected to address all of the following:

Develop and integrate solutions based on BIM and Digital Twins to support the whole buildings life cycle from design to deconstruction and reuse, including operation.Ensure the solutions developed address all the following aspects: Supporting optimal, adaptable and reversible building design for energy efficiency, circularity and sustainability. Allowing to track buildings materials and construction products, and supporting cost-effective deconstruction and reuse, recycling and recovery of building materials at end of life. Integrating buildings monitoring data (e.g. from sensors and IoT devices) into an interoperable Digital Twin for automated, optimised building performance monitoring and management, and preventive maintenance. Enabling buildings data interoperability, quality and integrity across the life cycle, in particular to reliably assess and track building performance over the lifecycle, enabling tailored data access for all life cycle’s stakeholders (architects, engineering companies, contractors, building owners, financing institutions, etc.). Relying where possible on open BIM standards and linking, where relevant, to digital logbooks and relevant initiatives (e.g. the Smart Readiness Indicator under the Energy Performance of Buildings Directive). Easiness of use and cost effectiveness, in particular for SMEs and companies with limited experience in digital solutions, and high potential for replication and commercialisation. Apply the solutions delivered on a set (at least two) of real-life residential and non-residential building construction and renovation projects which, taken together, allow to demonstrate the potential of the solutions across all aspects listed in the topic and across the life cycle.Ensure that the demonstrations of the solutions delivered: Cover at least two different countries, with diverse climatic conditions.Involve local and regional values chains, in particular SMEs, based on participatory approaches to increase innovation acceptability. Result in clear and, where relevant, quantified and measurable indicators on the improvements due to the use of the solutions, for all aspects listed in the topic and across the life cycle. Contribute to the activities of the Built4People partners and to the Built4People network of innovation clusters. This topic implements the co-programmed European Partnership on ‘People-centric sustainable built environment’ (Built4People). As such, projects resulting from this topic will be expected to report on results to the European Partnership ‘People-centric sustainable built environment’ (Built4People) in support of the monitoring of its KPIs.


Specific Topic Conditions:Activities are expected to achieve TRL 6-8 by the end of the project – see General Annex B.




ver menos

Temáticas Obligatorias del proyecto: Temática principal: The project aims to enhance Building Information Modelling (BIM) and Digital Twinning for sustainable building construction and renovation. It focuses on optimizing energy efficiency, sustainability, and circularity principles across the building life cycle, ensuring interoperability, accessibility, and cost-effectiveness for stakeholders, especially SMEs, with real-world demonstrations and broad application.

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:
Empresas Micro, Pequeña, Mediana, Grande
Centros Tecnológicos
Universidades
Organismos públicos

Características del Proyecto

Requisitos de diseño: Presupuesto: *Presupuesto para cada participante en el proyecto Requisitos técnicos: The anticipated impacts of the project include reducing construction and renovation time and costs, promoting material reuse and recycling, enhancing building performance in terms of energy efficiency, sustainability, comfort, health, and accessibility, ensuring interoperability with existing technologies like BIM and Digital Twins, facilitating ease of use and cost-effectiveness, and demonstrating measurable improvements across diverse climatic conditions and lifecycle stages. Additionally, the initiatives are expected to enhance data quality, integrity, and accessibility for stakeholders and contribute to the broader application of BIM and Digital Twin solutions, particularly benefiting SMEs in the building industry.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 6:. Representa un paso importante en demostrar la madurez de una tecnología. Se construye un prototipo de alta fidelidad que aborda adecuadamente las cuestiones críticas de escala, que opera en un entorno relevante, y que debe ser a su vez una buena representación del entorno operativo real. leer más.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities.
Condiciones: No existe condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
El presupuesto total de la convocatoria asciende a
Presupuesto total de la convocatoria.
Proyectos financiables en esta convocatoria.
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.
Certificado DNSH: Los proyectos presentados a esta línea deben de certificarse para demostrar que no causan perjuicio al medio ambiente. + info

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
Deducción I+D+i:
0% 25% 50% 75% 100%
La empresa puede aplicar deducciones fiscales en I+D+i de los gastos del proyecto y reducir su impuesto de sociedades. leer más