Innovating Works
FCH-02.2-2015
FCH-02.2-2015: Improved electrolysis for Distributed Hydrogen production
Specific Challenge:Implemented energy policies have the objective of producing 65% of electricity from renewable energy sources by 2050, and of reducing emissions of CO2 linked to energy production by 50%.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 27-08-2015.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Specific Challenge:Implemented energy policies have the objective of producing 65% of electricity from renewable energy sources by 2050, and of reducing emissions of CO2 linked to energy production by 50%.

The rapid deployment of wind power and solar energy sources contribute to reducing the carbon footprint of the electricity grid. However, wind power and solar energy are resources dependent on meteorological conditions and their instability poses a number of problems for functioning of the electrical grid, in terms of stabilisation mechanisms, regulation and offsetting. The bottlenecks in the electricity supply system result from an excess of renewable energy which cannot be transferred to the grid and that is consequently curtailed by the operators of the supply grid, in order to balance the power produced and demand for energy and/or to permit the allocation of electricity deriving from other sources

Considerable investments in transport and distribution infrastructure will be necessary in the forthcoming years. In its global energy prospects, the International Energy Agency forecasts that total investments in transport and distribution (T&D) i... ver más

Specific Challenge:Implemented energy policies have the objective of producing 65% of electricity from renewable energy sources by 2050, and of reducing emissions of CO2 linked to energy production by 50%.

The rapid deployment of wind power and solar energy sources contribute to reducing the carbon footprint of the electricity grid. However, wind power and solar energy are resources dependent on meteorological conditions and their instability poses a number of problems for functioning of the electrical grid, in terms of stabilisation mechanisms, regulation and offsetting. The bottlenecks in the electricity supply system result from an excess of renewable energy which cannot be transferred to the grid and that is consequently curtailed by the operators of the supply grid, in order to balance the power produced and demand for energy and/or to permit the allocation of electricity deriving from other sources

Considerable investments in transport and distribution infrastructure will be necessary in the forthcoming years. In its global energy prospects, the International Energy Agency forecasts that total investments in transport and distribution (T&D) infrastructure will amount to US$ 6.817 billion during the period 2014-2035.

The postponement over time of transport and distribution infrastructure is possible by using storage resources to absorb power exceeding the capacity of a T&D line and returning it at a subsequent point, when the available T&D capacities permit. The upgrading of T&D resources generally translates into high fixed costs, while relatively limited storage resources allow a delay in (or even avoidance of) the investments which would otherwise be necessary.

Hydrogen can play a significant role for the support to the electricity grid, for peak shifting and demand response.

Current electrolysers are designed for high efficiency at their operating design point, at typically close to 100% load, and to run continuously. Providing energy services is expected to require start-stop and dynamic operation and high efficiency across much of the load curve. The electrolyser would have to follow the variable generation profile of renewable sources locally available and be adapted to the intermittent profile of electricity supply. It could be used also as an energy system able to maximize the energy self-consumption of entire districts in a municipal area or industry park, relying as much as possible on renewable sources locally available, while being grid connected for security of supply.


Scope:Proposal must address the following objectives:

Development of electrolysers from 100 to 500 kW to provide grid services. Fact based assessment of specifications, supported by experimental evidences (i.e. from existing facilities, especially interaction with the grid and renewable electricity sources), is highly valuable System and component optimization for partial load operation, from 20% (with a minimum efficiency of 50%) to 120% System and component optimization for highly dynamic operation ramp-up rates of less than 2 seconds going from 20% to 100% of nominal power, warm start-up cold start-up standby behaviour, i.e. maximum of 5% of nominal power in standby mode Control system designed to enhance interaction with the grid and renewable sources Proposals could address the additional following objectives:

System engineering and improvements in manufacturing process for decreasing costs down to 3.7M€/tpd, contributing to system simplification, cost reduction, material use minimisation or that put in place a path to volume manufacturing Technology to be tested in the field for at least 6 months to validate the development achieved. The method utilized should be illustrated in the proposal
Expected Impact: Address business cases and applications where the Distributed Hydrogen Production may have a significant impact As reported in the MAWP, target KPIs on cost per nominal power for alkaline and PEM electrolysers will be considered Contribution to achieve KPIs of the “Electrolysis Study” from FCH 2 JU, decreasing electricity consumption to 52 kWh/kg H2 for alkaline electrolysers and 48 kWh/kg H2 for PEM electrolysers, and capital cost to 630 EUR/kW for alkaline electrolysers and 1,000 EUR/kW for PEM electrolysers) Setting up innovative solutions and configurations for grid and renewable energy integration, implemented of control systems fully adapted to provide grid services Involvement of policy makers to develop regulations for grid services provided by electrolysers in the EU member states
ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Specific Challenge:Implemented energy policies have the objective of producing 65% of electricity from renewable energy sources by 2050, and of reducing emissions of CO2 linked to energy production by 50%. Specific Challenge:Implemented energy policies have the objective of producing 65% of electricity from renewable energy sources by 2050, and of reducing emissions of CO2 linked to energy production by 50%.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Amortizaciones.
Activos.
Otros Gastos.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Other Information:
TRL start: 4
TRL end: 6
To be eligible for participation a consortium must contain at least one constituent entity of the Industry or Research Grouping.
Indicative funding: The FCH 2 JU considers that proposals requesting a contribution from the EU of EUR 2.5 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Number of projects: A maximum of 1 project may be funded under this topic
Expected duration: 3 years
Type of action: Research and Innovation Action
The conditions related to this topic are provided in the FCH2 JU Work Plan 2015 and its General Annexes.
Please read carefully all provisions below before the preparation of your application.
The budget breakdown for this call is given in the call conditions section of the work programme. 
List of countries and applicable rules for funding: described in part A of the General Annexes of the FCH2 JU Work Plan 2015.
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the FCH2 JU Work Plan 2015.
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part F of the General Annexes of the FCH2 JU Work Plan 2015.
3.2 FCH2 Guide for applicants on submission and evaluation
&...
Other Information:
TRL start: 4
TRL end: 6
To be eligible for participation a consortium must contain at least one constituent entity of the Industry or Research Grouping.
Indicative funding: The FCH 2 JU considers that proposals requesting a contribution from the EU of EUR 2.5 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Number of projects: A maximum of 1 project may be funded under this topic
Expected duration: 3 years
Type of action: Research and Innovation Action
The conditions related to this topic are provided in the FCH2 JU Work Plan 2015 and its General Annexes.
Please read carefully all provisions below before the preparation of your application.
The budget breakdown for this call is given in the call conditions section of the work programme. 
List of countries and applicable rules for funding: described in part A of the General Annexes of the FCH2 JU Work Plan 2015.
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the FCH2 JU Work Plan 2015.
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part F of the General Annexes of the FCH2 JU Work Plan 2015.
3.2 FCH2 Guide for applicants on submission and evaluation
 
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Indicative timetable for evaluation and grant agreement:
Information on the outcome of evaluation: maximum 5 months from the call deadline.
Signature of grant agreements: maximum 8 months from the call deadline.
 
Provisions, proposal templates and evaluation forms for the type of action under this topic:
FCH2 Research and Innovation Action (FCH2-RIA)
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
FCH2 Model Grant Agreement
H2020 Annotated Grant Agreement
 
Additional provisions:
FCH2 JU budget flexibility
Technology readiness levels (TRL): described in part E of the General Annexes of the FCH2 JU Work Plan 2015.
 
Open access must be granted to all scientific publications resulting from Horizon 2020 (including FCH2 JU) actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
 
 FCH2 JU additional documents
FCH2 JU Work Plan 2015 - call description
FCH2 JU Multi Annual Work Plan
FCH2 JU Regulation of establishment
 
 
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-JTI-FCH-2015 Improved electrolysis for Distributed Hydrogen production Specific Challenge:Implemented energy policies have the objective of producing 65% of electricity from renewable energy sources by 2050, and...
Sin info.
FCH-02-5-2020 Underground storage of renewable hydrogen in depleted gas fields and other geological stores
en consorcio: Specific Challenge:The increasing contribution of variable renewable energy (VRE) in the electricity grid is creating a substantial temporal...
Cerrada hace 4 años | Próxima convocatoria prevista para el mes de
FCH-02-1-2020 Catalyst development for improved economic viability of LOHC technology
en consorcio: Specific Challenge:Hydrogen is a flexible energy carrier that can be produced from any energy source, and which can be converted into variou...
Cerrada hace 4 años | Próxima convocatoria prevista para el mes de
FCH-02-8-2020 Demonstration of large-scale co-electrolysis for the Industrial Power-to-X market
en consorcio: Specific Challenge:In order to fight climate change, the need to reduce the emission of greenhouse gases will force the chemical industry to...
Cerrada hace 4 años | Próxima convocatoria prevista para el mes de
FCH-02-6-2020 Electrolyser module for offshore production of renewable hydrogen
en consorcio: Specific Challenge:The foreseen magnitude of renewable electricity (RE) production requires the development of large-scale offshore wind and...
Cerrada hace 4 años | Próxima convocatoria prevista para el mes de
FCH-02-7-2020 Cyclic testing of renewable hydrogen storage in a small salt cavern
en consorcio: Specific Challenge:The combination of variable renewable energy, electrolysers and geological stores can provide a means for capturing and h...
Cerrada hace 4 años | Próxima convocatoria prevista para el mes de