Innovating Works
FoF-08-2015
FoF-08-2015: ICT-enabled modelling, simulation, analytics and forecasting technologies
Scope:Specific challenge: Simulating continuous and discrete manufacturing processes, forecasting the behaviour of manufacturing systems and processes, and designing products to an even larger extent through virtual mock-ups and optimization methods integrated in the design and production chain are key enablers for Europe's future manufacturing sector. Advances in ICT in terms of high performance computing power and communication speed, smart sensor technologies for generating and exploiting "big data", the convergence of the embedded world and the Internet/Cloud world in cyber physical systems (CPS), multi-modal visualisation and interaction technologies, are leading to a new generation of modelling, simulation, forecasting and decision support methods and tools. These offer a huge potential for making the whole manufacturing chain more competitive.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 04-02-2015.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Scope:Specific challenge: Simulating continuous and discrete manufacturing processes, forecasting the behaviour of manufacturing systems and processes, and designing products to an even larger extent through virtual mock-ups and optimization methods integrated in the design and production chain are key enablers for Europe's future manufacturing sector. Advances in ICT in terms of high performance computing power and communication speed, smart sensor technologies for generating and exploiting "big data", the convergence of the embedded world and the Internet/Cloud world in cyber physical systems (CPS), multi-modal visualisation and interaction technologies, are leading to a new generation of modelling, simulation, forecasting and decision support methods and tools. These offer a huge potential for making the whole manufacturing chain more competitive.

Scope:

a.      R&I Actions: proposals are expected to cover at least one of the two themes identified below.

Innovative modelling, simulation, analytics and forecasting tools for manufacturing at large, building on advances in ICT. The Commission considers that proposals reques... ver más

Scope:Specific challenge: Simulating continuous and discrete manufacturing processes, forecasting the behaviour of manufacturing systems and processes, and designing products to an even larger extent through virtual mock-ups and optimization methods integrated in the design and production chain are key enablers for Europe's future manufacturing sector. Advances in ICT in terms of high performance computing power and communication speed, smart sensor technologies for generating and exploiting "big data", the convergence of the embedded world and the Internet/Cloud world in cyber physical systems (CPS), multi-modal visualisation and interaction technologies, are leading to a new generation of modelling, simulation, forecasting and decision support methods and tools. These offer a huge potential for making the whole manufacturing chain more competitive.

Scope:

a.      R&I Actions: proposals are expected to cover at least one of the two themes identified below.

Innovative modelling, simulation, analytics and forecasting tools for manufacturing at large, building on advances in ICT. The Commission considers that proposals requesting a contribution from the EU between EUR 2 and 4 million would allow this area to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts. Projects should be driven by industrial use-cases and should include proof-of-concept demonstrations for validation, preferably on real process chains. They should address as appropriate several of the following issues:

               Modelling and simulation methods involving multiple phenomena (physical, mechanical, energetic, chemical, energy, material characteristics, cost, …); including multi-scale and integrated discrete/continuous models, multidisciplinary and multiobjective design optimisation tools taking a holistic approach; and/or integrating virtual and physical experiments building on the combination of simulated, experimental, and real world data in real time.

               Integrated knowledge-based systems covering the complete product life-cycle with advanced analytics, smart decision support systems and self-learning capabilities exploiting the availability of "big data" from smart sensors, historical process files, or human-authored data; and addressing aspects, e. g. interactivity, real-time, data-fusion, imprecise computing, compressed sensing, advanced visualisation, security and privacy.

Integrated modelling, simulation and information management systems benefiting from recent advances in ICT. The Commission considers that proposals requesting a contribution from the EU between EUR 5 and 8 million would allow this area to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts. Projects are expected to stimulate pre-normative or standardisation activities related to aspects such as information/knowledge exchange, data sharing, semantic technologies, tool integration, etc. Projects must include reference implementations and demonstration and validation in minimum two comprehensive and complementary industrial use cases. Focus is on at least one of the following issues:

               Integrated information management systems for product-process-production systems that are well embedded into their social, environmental and economic context.

             Advanced computer aided technologies (CAx), modelling, simulation and decision support toolboxes tailored for novel manufacturing processes, e. g. laser-based and additive manufacturing.

For this topic, proposals should include an outline of the initial exploitation plan and business scenario, which will be developed further in the proposed project.

 

b.       Support Actions: Road mapping and constituency building for novel ICT-enabled concepts in manufacturing supporting the wide adoption of virtual, integrated, scalable, semantic factory models; merging design and production models; and integrating novel ICT for creativity. Stimulating EU-US collaboration on R&I related to modelling and simulation.

Expected impact:

            Increased productivity during design and ramp-up phases and for higher mass customization capacity for big enterprises as well as SMEs through access to on-demand scalable manufacturing process chains and services and through agreed data standards.             Improved cost efficiency and accuracy, reliability and speed of simulation techniques for manufacturing processes and/or full complex products.             Reduced time to production and optimised supply chains enabled by increased tool interoperability and data integration.             Enhanced interoperability of integrated product and factory design systems and global state monitoring enabling new type of services related to the data analysis, simulations and visualization techniques in each manufacturing stage. Types of action:

Research & Innovation Actions. It is expected that a minimum of one Research & Innovation Action is supported for each theme. Coordination and Support Actions
Cross-cutting Priorities:International cooperation


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Scope:Specific challenge: Simulating continuous and discrete manufacturing processes, forecasting the behaviour of manufacturing systems and processes, and designing products to an even larger extent through virtual mock-ups and optimization methods integrated in the design and production chain are key enablers for Europe's future manufacturing sector. Advances in ICT in terms of high performance computing power and communication speed, smart sensor technologies for generating and exploiting "big data", the convergence of the embedded world and the Internet/Cloud world in cyber physical systems (CPS), multi-modal visualisation and interaction technologies, are leading to a new generation of modelling, simulation, forecasting and decision support methods and tools. These offer a huge potential for making the whole manufacturing chain more competitive. Scope:Specific challenge: Simulating continuous and discrete manufacturing processes, forecasting the behaviour of manufacturing systems and processes, and designing products to an even larger extent through virtual mock-ups and optimization methods integrated in the design and production chain are key enablers for Europe's future manufacturing sector. Advances in ICT in terms of high performance computing power and communication speed, smart sensor technologies for generating and exploiting "big data", the convergence of the embedded world and the Internet/Cloud world in cyber physical systems (CPS), multi-modal visualisation and interaction technologies, are leading to a new generation of modelling, simulation, forecasting and decision support methods and tools. These offer a huge potential for making the whole manufacturing chain more competitive.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Amortizaciones.
Activos.
Otros Gastos.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
 
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
 
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
 
Provision...
Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
 
Evaluation
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
The threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
 
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
 
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical annex
Standard evaluation form
Annotated Model Grant Agreement
Coordination and Support Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical annex)
Standard evaluation form
Annotated Model Grant Agreement
 
Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
Please read the document FoF_topics_1_8_9_Guide-to-ICT-related-activities  and  refer to the Special support services in "Get Support".
 
Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Additional information on this topic:
             FAQ
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-FoF-2014-2015 ICT-enabled modelling, simulation, analytics and forecasting technologies Scope:Specific challenge: Simulating continuous and discrete manufacturing processes, forecasting the behaviour of manufacturing systems and...
Sin info.
DT-FOF-05-2019 Open Innovation for collaborative production engineering (IA)
en consorcio:
Cerrada hace 2 años | Próxima convocatoria prevista para el mes de
DT-FOF-11-2020 Quality control in smart manufacturing (IA)
en consorcio: Specific Challenge:Smart factories are characterised by processes involving interlinked work pieces and associated tools as well as logistic...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
DT-FOF-07-2020 Assembly of micro parts (RIA)
en consorcio: Specific Challenge:Miniaturisation leads to new functionalities, weight reduction and energy and material saving. European industry has curr...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
DT-FOF-10-2020 Pilot lines for large-part high-precision manufacturing (IA 50%)
en consorcio: Specific Challenge:The production of large-scale parts has achieved so far a relatively low level of mechanisation and automation because st...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
DT-FOF-09-2020 Energy-efficient manufacturing system management (IA)
en consorcio: Specific Challenge:Improving industrial energy efficiency requires the integration of energy data, such as historical data, real-time data a...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de