Innovating Works
WASTE-6a-2015
WASTE-6a-2015: Eco-innovative solutions
Scope:Specific challenge:The growing waste produced in Europe, particularly in urban areas, where the vast majority of the world population are expected to live by 2050, represents a cost for society and a burden on the environment and, at the same time, a valuable stock of resources that can be exploited.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 21-04-2015.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Scope:Specific challenge:The growing waste produced in Europe, particularly in urban areas, where the vast majority of the world population are expected to live by 2050, represents a cost for society and a burden on the environment and, at the same time, a valuable stock of resources that can be exploited.

Boosting eco-innovative solutions to prevent waste generation and promote the use of waste as a resource, in line with the objectives of the EU Resource Efficiency Roadmap[1] and the Waste Framework Directive[2], can enhance the natural and living environment in urban and peri-urban areas. Developing and demonstrating such solutions in real-life environments will enhance their market uptake and contribute to sustainable urbanisation worldwide.

Cities are more than spatially extended material artefacts; they are complex systems similar to living organisms that use energy, air, water and nutrients and need to dispose waste in a sustainable way. Adopting an urban metabolism perspective opens the way for innovative, systemic approaches, involving the analysis of resource flows within cities. Integrating in this way economic, social and environmental dynamic... ver más

Scope:Specific challenge:The growing waste produced in Europe, particularly in urban areas, where the vast majority of the world population are expected to live by 2050, represents a cost for society and a burden on the environment and, at the same time, a valuable stock of resources that can be exploited.

Boosting eco-innovative solutions to prevent waste generation and promote the use of waste as a resource, in line with the objectives of the EU Resource Efficiency Roadmap[1] and the Waste Framework Directive[2], can enhance the natural and living environment in urban and peri-urban areas. Developing and demonstrating such solutions in real-life environments will enhance their market uptake and contribute to sustainable urbanisation worldwide.

Cities are more than spatially extended material artefacts; they are complex systems similar to living organisms that use energy, air, water and nutrients and need to dispose waste in a sustainable way. Adopting an urban metabolism perspective opens the way for innovative, systemic approaches, involving the analysis of resource flows within cities. Integrating in this way economic, social and environmental dynamics, it is possible to understand the socio-economically and gender nuanced patterns of resource use and consumption, and pinpoint drivers of waste-avoiding behaviour, manufacturing and business and public governance models.

Scope:Proposals should adopt an integrated urban metabolism approach and inter-disciplinary research and innovation and take into account the gender dimension where relevant. Proposals should involve active engagement of local authorities, citizens and other relevant stakeholders, using innovative concepts such as mobilisation and mutual learning[3].

Proposals shall address the following issue:

Eco-innovative solutions: Demonstration, at an appropriate pilot scale, and market replication, of integrated eco-innovative cost- and energy-efficient technologies, processes and/or services for waste prevention, treatment, enhanced collection, recycling and recovery of high-grade valuable materials from waste. Approaches should integrate technological and non-technological solutions, including, where appropriate, the use of economic instruments, such as incentives for more sustainable production and consumption patterns, and awareness raising initiatives. Proposals should include the participation of industry, including SMEs as far as possible.

The Commission considers that proposals requesting a contribution from the EU of between EUR 8 and 10 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.

Expected impact: Significant measurable improvements in the state of the art in waste management in urban and peri-urban areas, and in the operationalisation of the urban metabolism approach for sustainable urban development and reduction of negative environmental impacts (e.g. health)in cities. Contribution, over the long term, to the establishment of European research and innovation leadership in urban waste management and prevention.

In addition, the following specific impacts are expected:

Significant improvement in cost, material and, where appropriate, energy recovery efficiency in waste recycling and prevention in the short term. Identification of potential markets for the proposed waste collection strategies, treatment technologies and recycled products, as well as potential for replicability of solutions, based on a return-on-investment study on the short term. Creation, in the short/medium term, of green jobs and/or new SMEs due to effective market uptake of innovative technologies, processes and services, ensuring equality of access to women and men, and social inclusion. Contribution to development of standards, validated by key industrial players, and identifying best available and emerging techniques under the Industrial Emissions Directive.

Type of action: a) Innovation actions

[1]     COM(2011) 571

[2]     Directive 2008/98/EC

[3]     http://ec.europa.eu/research/science-society/index.cfm?fuseaction=public.topic&id=1226


Cross-cutting Priorities:Socio-economic science and humanitiesGender


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Scope:Specific challenge:The growing waste produced in Europe, particularly in urban areas, where the vast majority of the world population are expected to live by 2050, represents a cost for society and a burden on the environment and, at the same time, a valuable stock of resources that can be exploited. Scope:Specific challenge:The growing waste produced in Europe, particularly in urban areas, where the vast majority of the world population are expected to live by 2050, represents a cost for society and a burden on the environment and, at the same time, a valuable stock of resources that can be exploited.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Amortizaciones.
Activos.
Otros Gastos.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme 
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme
3.2 Guide to the submission and evaluation process
 
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Information on the outcome of two-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
 
 
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Innovation Action:
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
Ann...
Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme 
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme
3.2 Guide to the submission and evaluation process
 
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
Information on the outcome of two-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
 
 
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Innovation Action:
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
Annotated Model Grant Agreement
 
Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
 
Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
 
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-WASTE-2014-2015 Eco-innovative solutions Scope:Specific challenge:The growing waste produced in Europe, particularly in urban areas, where the vast majority of the world population...
Sin info.
WASTE-7-2015 Ensuring sustainable use of agricultural waste, co-products and by-products
en consorcio: Scope:Specific challenge: Agriculture generates co-products, by-products and waste streams that are currently not properly taken care of bot...
Cerrada hace 9 años | Próxima convocatoria prevista para el mes de
WASTE-6b-2015 Eco-innovative strategies
en consorcio: Scope:Specific challenge:The growing waste produced in Europe, particularly in urban areas, where the vast majority of the world population...
Cerrada hace 9 años | Próxima convocatoria prevista para el mes de
WASTE-6a-2015 Eco-innovative solutions
en consorcio: Scope:Specific challenge:The growing waste produced in Europe, particularly in urban areas, where the vast majority of the world population...
Cerrada hace 9 años | Próxima convocatoria prevista para el mes de
WASTE-4d-2015 Raw materials partnerships
en consorcio: Scope:Specific Challenge: The complexity and heterogeneity of waste streams require coordination and networking between researchers, entrepr...
Cerrada hace 9 años | Próxima convocatoria prevista para el mes de
WASTE-2-2014 A systems approach for the reduction, recycling and reuse of food waste
en consorcio: Scope:Specific challenge: Food waste has taken on disquieting proportions worldwide in all steps of the food production and supply chain but...
Cerrada hace 10 años | Próxima convocatoria prevista para el mes de