Innovating Works

H2020

Cerrada
HORIZON-CL4-2021-SPACE-01-21
Reusability for European strategic space launchers - technologies and operation maturation including flight test demonstration
ExpectedOutcome:Projects are expected to contribute to all of the following outcomes:
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 16-02-2022.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Projects are expected to contribute to all of the following outcomes:

Contribution to the overarching objective of launch cost/price reduction by 50% by 2030 (with respect to A6/VegaC cost/price 2021 economic conditions), for the benefit of EU Space programmes implementation and towards reinforcing EU‘s independent capacity to access to space.Innovation acceleration of enabling technologies (maturing, assessing and practicing, through representative in flight experiments).Matured technologies up to TRL5/6, integration of system tests vehicle, on-ground and low altitude system tests by 2023 and contribution to the preparation of suborbital system tests potentially in 2025.Cost reduction investigation and system tests. These outcomes will contribute to enhance EU strategic autonomy and sector competitiveness, in line with the Expected Impact of the destination.


Scope:Cost reduction and improving flexibility of European launch systems are the main challenges in order to foster European industry competitiveness on the global market.

R&I will focus on reusability concepts including required technologies that have a s... ver más

ExpectedOutcome:Projects are expected to contribute to all of the following outcomes:

Contribution to the overarching objective of launch cost/price reduction by 50% by 2030 (with respect to A6/VegaC cost/price 2021 economic conditions), for the benefit of EU Space programmes implementation and towards reinforcing EU‘s independent capacity to access to space.Innovation acceleration of enabling technologies (maturing, assessing and practicing, through representative in flight experiments).Matured technologies up to TRL5/6, integration of system tests vehicle, on-ground and low altitude system tests by 2023 and contribution to the preparation of suborbital system tests potentially in 2025.Cost reduction investigation and system tests. These outcomes will contribute to enhance EU strategic autonomy and sector competitiveness, in line with the Expected Impact of the destination.


Scope:Cost reduction and improving flexibility of European launch systems are the main challenges in order to foster European industry competitiveness on the global market.

R&I will focus on reusability concepts including required technologies that have a strong potential for cost reduction, starting with the recovery of the most expensive components such as first stage. It can also increase launch flexibility by reducing lead-time from order to launch by helping to adapt efficiently the launch rate and the performance to market variations. In addition, reusability would contribute to align space economy with the ecological transition to sustainability.

The activities will address technologies and building blocks maturation up to TRL5/6 and subsystem/system tests including system, vehicle integration, ground tests, low altitude flight system tests by 2023 and contribution to the preparation up to ground based system tests of suborbital flight system tests by 2025. The execution of the suborbital tests is not part of the scope.

The developed enabling technologies and building blocks should be applicable to strategic launchers able to launch EU Space Programme components, with the objective of enabling operational capacities by 2030. The system tests vehicle should be representative of a reusable 1st stage of a strategic EU launcher. This vehicle should be at a sufficiently large scale in order to be representative of the expected final capacities. The vehicle will be equipped with a reusable propulsion system.

The proposed activities must also support EU non-dependence objective and include the assessment of costs reduction investigations and system tests results towards the overarching objective mentioned in the expected outcomes.

The activities will address enabling technologies maturation and demonstration at least in all of the following areas:

low cost GNC and avionics (hybridation techniques, navigation sensors, modular, reconfigurable),manoeuvring control devices,Health Monitoring System (HMS), propellant management,aerodynamic devices,descent and landing/recovery systems, including low latency, closed loop communication systems for landing,on-ground servicing processes (refurbishment, check-out supported by automatic post flight analysis and repair and recertification for reused elements),safety critical processes before launch and after landing. The activities should include as many as technologies possible in each area to maximise the number of matured technologies to be submitted to integrated tests at system level (all technologies together).

All the activities should be complementary and coherent with the ESA on-going or future activities in particular those decided at the last ESA Ministerial held in November 2019. Proposals should provide all IPR dependencies and dependencies with other on-going activities, and detail the implementation, the reporting and the organisational as well as steering measures that will be taken to ensure that the proposed activities can be implemented and can achieve all the expected outcomes within the project schedule and budget.

In this topic the integration of the gender dimension (sex and gender analysis) in research and innovation content is not a mandatory requirement.


Specific Topic Conditions:Activities are expected to achieve TRL5-6 by the end of the project – see General Annex B.




Cross-cutting Priorities:Digital Agenda


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:
Empresas Micro, Pequeña, Mediana, Grande
Centros Tecnológicos
Universidades
Organismos públicos

Características del Proyecto

Requisitos de diseño: Duración: Requisitos técnicos: ExpectedOutcome:Projects are expected to contribute to all of the following outcomes: ¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 4:. Es el primer paso para determinar si los componentes individuales funcionarán juntos como un sistema en un entorno de laboratorio. Es un sistema de baja fidelidad para demostrar la funcionalidad básica y se definen las predicciones de rendimiento asociadas en relación con el entorno operativo final. leer más.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
The funding rate for RIA projects is 100 % of the eligible costs for all types of organizations.
Condiciones: No existe condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.