Innovating Works

H2020

Cerrada
HORIZON-CL6-2021-CIRCBIO-...
HORIZON-CL6-2021-CIRCBIO-01-03: Innovative solutions to over-packaging and single-use plastics, and related microplastic pollution
ExpectedOutcome:A successful proposal will contribute to all impacts in this destination related to consumers and industry, in particular to European industrial sustainability, competitiveness and resource independence by lowering the environmental footprint, enabling climate-neutrality and higher resource efficiency, through increased circularity and a resulting reduction in GHG and air pollution emissions.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 06-10-2021.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:A successful proposal will contribute to all impacts in this destination related to consumers and industry, in particular to European industrial sustainability, competitiveness and resource independence by lowering the environmental footprint, enabling climate-neutrality and higher resource efficiency, through increased circularity and a resulting reduction in GHG and air pollution emissions.

Project results are expected to contribute to at least three of the following outcomes:

Increased deployment and market uptake of innovative solutions, through better design, alternative materials, business models promoting reuse, deposit systems, smart labelling in support of and complying with the current relevant legal framework and, when scope would cover the food chain, the future EU framework for sustainability labelling, etc.Increased reuse, recyclability and upcycling of packaging and single-use plasticsSignificant reduction in over-packaging and single-use plastics in consumer goods, food packaging and humanitarian relief itemsSignificant reduction in packaging waste and single-use plastic wasteSignificant reduction in management costs for the... ver más

ExpectedOutcome:A successful proposal will contribute to all impacts in this destination related to consumers and industry, in particular to European industrial sustainability, competitiveness and resource independence by lowering the environmental footprint, enabling climate-neutrality and higher resource efficiency, through increased circularity and a resulting reduction in GHG and air pollution emissions.

Project results are expected to contribute to at least three of the following outcomes:

Increased deployment and market uptake of innovative solutions, through better design, alternative materials, business models promoting reuse, deposit systems, smart labelling in support of and complying with the current relevant legal framework and, when scope would cover the food chain, the future EU framework for sustainability labelling, etc.Increased reuse, recyclability and upcycling of packaging and single-use plasticsSignificant reduction in over-packaging and single-use plastics in consumer goods, food packaging and humanitarian relief itemsSignificant reduction in packaging waste and single-use plastic wasteSignificant reduction in management costs for the respective waste streamsSignificant reduction in the release of microplastics from packaging and single-use plastics into the environment
Scope:The amount of materials used for packaging is growing continuously and in 2017 packaging waste in Europe reached a record – 173 kg per inhabitant, the highest level ever. In order to ensure that all packaging on the EU market is reusable or recyclable in an economically viable way by 2030, the essential requirements for packaging relate to reducing (over)packaging and packaging waste, designing for re-usable and recyclable packaging, including alternative reusable products or systems, and reducing the complexity of packaging materials.

Plastics continue to be one of the key areas in the 2020 circular economy action plan (CEAP). This is due to their circularity potential, but also due to concerns about their environmental footprint and the use of primarily fossil-based feedstock for their production. One of the main sources of pollution is the amount of single-use plastics and plastics packaging that is wasted daily and that overburdens our waste and water management systems. A particular issue regarding plastics is the pollution from microplastics and disintegrating material, which reaches the soils and ocean and whose possible health impacts on animals and humans still need to be assessed in depth. Some of these microplastics are added intentionally to products such as cosmetics, while other pollution comes from the disintegration and migration of various types of plastics during their use and waste phases. Plastic waste is also an unintended consequence of humanitarian response – often funded by European taxpayer money – and leading to pollution in countries receiving aid but without the capacity to manage the waste.

In line with the EU strategy for plastics in a circular economy and the Single Use Plastics (SUP) Directive, and in line with the priorities on plastics and packaging in the CEAP, projects should combine at least three of the following elements: a reduction of (over)packaging and packaging waste, design for reuse and recyclability of packaging, a reduction of material complexity including the number of materials used (including diverse polymers), the restriction of intentionally added microplastics, increasing the uptake of alternatives decreasing the dependency on fossil fuels and the related pollution, and measures to prevent the release of microplastics at all relevant stages of the product life cycle.

Projects should demonstrate at large scale and validate innovative solutions that are quantitatively relevant and replicable under diverse economic, geographical and social conditions, and across sectors, including humanitarian response, through better design, alternative materials (including biobased and biodegradable), business models promoting reuse, recycling, upcycling, deposit systems, smart labelling, sensor-based sorting, etc. to tackle over-packaging and single-use plastics in consumer goods, food packaging and humanitarian relief items. Where the use of alternative materials is concerned, projects should address aspects to assure quality and safety of these new alternatives.

All solutions should be based on life-cycle approaches. Proposals should integrate life cycle assessment using the European Commission’s Product Environmental Footprint (PEF) method and relevant costing methods. Projects should choose a systemic approach to value chains and end users, including consumers as key actors. All achieved outcomes should be demonstrated using quantitative indicators and targets wherever possible.

Social innovation is recommended when the solution is at the socio-technical interface and requires social change, new social practices, social ownership or market uptake.

Research on the above issues in the humanitarian context (relating to humanitarian relief items) is also eligible under this topic.

In this topic the integration of the gender dimension (sex and gender analysis) in research and innovation content is not a mandatory requirement.


Specific Topic Conditions:Activities are expected to achieve TRL 6-8 by the end of the project – see General Annex B.




Cross-cutting Priorities:Social InnovationOcean sustainability and blue economy


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: ExpectedOutcome:A successful proposal will contribute to all impacts in this destination related to consumers and industry, in particular to European industrial sustainability, competitiveness and resource independence by lowering the environmental footprint, enabling climate-neutrality and higher resource efficiency, through increased circularity and a resulting reduction in GHG and air pollution emissions. ExpectedOutcome:A successful proposal will contribute to all impacts in this destination related to consumers and industry, in particular to European industrial sustainability, competitiveness and resource independence by lowering the environmental footprint, enabling climate-neutrality and higher resource efficiency, through increased circularity and a resulting reduction in GHG and air pollution emissions.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Subcontracting costs.
Purchase costs.
Other cost categories.
Indirect costs.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 6:. Representa un paso importante en demostrar la madurez de una tecnología. Se construye un prototipo de alta fidelidad que aborda adecuadamente las cuestiones críticas de escala, que opera en un entorno relevante, y que debe ser a su vez una buena representación del entorno operativo real. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Para el presupuesto subvencionable la intensidad de la ayuda en formato fondo perdido podrá alcanzar desde un 70% hasta un 100%.
The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities. The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities.
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.