Innovating Works

PLUG-N-HARVEST

Financiado
PLUG-N-play passive and active multi-modal energy HARVESTing systems, circular economy by design, with high replicability for Self-sufficient Districts Near-Zero Buildings Conventional Retrofitting (CR) can result in high energy use reductions at the expense of high installation costs and, usually, without being able to directly perform harvesting from Renewable Energy Sources (RES). Building Automa... Conventional Retrofitting (CR) can result in high energy use reductions at the expense of high installation costs and, usually, without being able to directly perform harvesting from Renewable Energy Sources (RES). Building Automation (BA) systems, as compared to CR, can result in medium energy use reductions and in low or medium harvesting from RES at the expense of medium installation costs and medium operational costs. Recently, the concept of Adaptable/Dynamic Building Envelopes (ADBE) - such as Multifunctional Façade Modules - has been proposed towards overcoming many of the shortcomings of CR and BA. ADBE systems can result in high energy use reductions and high harvesting from RES at the expense of medium-to-high installation costs and medium operational costs. The main strategic goal of the PLUG-N-HARVEST proposal is to design, develop, demonstrate and exploit a new modular, plug-n-play concept/product for ADBE - deployable to both residential and non-residential buildings - which is able to provide high (maximum possible) energy use reductions and high (maximum possible) energy harvesting from RES both at the single-building and the district scale while requiring medium-to-low installation costs and almost-zero operational costs. Moreover, by appropriately exploiting its attributes, the PLUG-N-HARVEST system will be designed and implemented considering circular economy principles, which will allow implementing new business models based on leasing and renting modes and, by this, leaving the door open to massive implementations. Four different multi-building Pilots – in Germany, Spain, Greece and the U.K. - will be used for demonstrating the use of the integrated PLUG-N-HARVEST system in full-scale, on a 24/7 basis and for a long period. The Pilots involve buildings with all different kinds of energetic, thermal and occupants interactions, home occupants of highly diverse behaviour and background and include both residential and non-residential buildings. ver más
31/05/2022
ETHNIKO KENTRO EREVNAS KA...
7M€
Duración del proyecto: 56 meses Fecha Inicio: 2017-09-01
Fecha Fin: 2022-05-31

Línea de financiación: concedida

El organismo H2020 notifico la concesión del proyecto el día 2022-05-31
H2020 No se conoce la línea exacta de financiación, pero conocemos el organismo encargado de la revisión del proyecto.
Presupuesto El presupuesto total del proyecto asciende a 7M€
Líder del proyecto
ETHNIKO KENTRO EREVNAS KAI TECHNOLOGIKIS ANAP... No se ha especificado una descripción o un objeto social para esta compañía.