Hola,
¿eres nuevo aquí?

Regístrate gratis y conecta tu empresa con financiación pública, partners y proyectos.

Tengo cuenta

Regístrate

Ver video

Aeropaft

Financiado

Cerrado

Delay of flow separation and stall on Aerofoils using a Passive Flow control Tec...

Delay of flow separation and stall on Aerofoils using a Passive Flow control Technology which will improve aerodynamic performance and stability of wind turbines increasing their range of operation Flow separation and dynamic stalling in aerofoils result in increased drag, reduced lift and increased dynamic loads on aerodynamic devices/vehicles. This culminates in reduced aerodynamic efficiency and increased structural vibra... ver más

30/04/2015

Jarilo Limited

71K€

Presupuesto del proyecto: 71K€

Líder del proyecto

JARILO LIMITED No se ha especificado una descripción o un objeto social para esta compañía.

TRL 4-5

Fecha límite participación Sin fecha límite de participación.

Financiación concedida El organismo H2020 notifico la concesión del proyecto el día 2015-04-30

SIE-01-2014-1: Stimulating the innovation potentia...

I+D

Cerrada hace 10 años

0% 70% 100%

Información adicional privada

No hay información privada compartida para este proyecto. Habla con el coordinador.

1 Participantes

Jarilo Limited

50.00K€ | Lider

Proyectos interesantes

AIRE

Renewable Energ...

Mechanical Engi...

5M€ Cerrado

TECNOLOGÍAS AERODINÁMICAS Y ESTRUCTURALES PAR...

Aerospace Engin...

Renewable Energ...

2M€ Cerrado

WINDFLOWER

Aerospace Engin...

Mechanical Engi...

465K€ Cerrado

AVATAR

Aerospace Engin...

Renewable Energ...

9M€ Cerrado

PRE2019-089821

Aerospace Engin...

Mechanical Engi...

98K€ Cerrado

NUMIWING

Renewable Energ...

Aerospace Engin...

100K€ Cerrado

Conecta tu I+D

¿Tienes un proyecto y buscas un partner? Gracias a nuestro motor inteligente podemos recomendarte los mejores socios y ponerte en contacto con ellos. Te lo explicamos en este video

Duración del proyecto: 6 meses Fecha Inicio: 2014-10-07
Fecha Fin: 2015-04-30

Líder del proyecto

JARILO LIMITED No se ha especificado una descripción o un objeto social para esta compañía.

TRL 4-5

Presupuesto del proyecto 71K€

Fecha límite de participación Sin fecha límite de participación.

Descripción del proyecto Flow separation and dynamic stalling in aerofoils result in increased drag, reduced lift and increased dynamic loads on aerodynamic devices/vehicles. This culminates in reduced aerodynamic efficiency and increased structural vibrations, which are noisy and reduce the operating life of aerodynamic devices. To delay flow separations and dynamic stalling, flow control is engaged either actively (artificial means) or passively (natural means). This project describes a novel passive flow control method (Aeropaft) to be applied primarily in the wind turbine (WT) industry, then to aircraft and ground and marine vehicles. Wind energy is the fastest growing Renewable Energy source (RES) at 24.4% per year. To keep pace with growing demand, there is need for advanced technologies to increase the aerodynamic efficiency. Aeropaft is a simple technology exploiting high velocity currents from near the leading edge (via internal ducts) to re-energise the free-stream flow at the top of an aerofoil. This results in a 5% increase in electrical power yield for a 1MW WT, increase in lift (~16%), reduction of profile drag force (~7%) at higher aerofoil angles of incidences (>12o), and the reduction of wear caused by vibrations. We will penetrate 1% of the global WT market and 10% of the European market. Licensed Manufacturers stand to gain a 0.33% increase in market value and revenue of €1.72bn, while utility companies gain €101,013 per annum through savings and increased energy output per WT. Our revenue will come through licensing at 0.2% of the whole turbine cost translating to revenue of €10.3m and profits of €7.72m, five years post commercialization. Phase 1 will entail a market study, partner search, assessing structural integrity issues and developing an IP and commercialisation strategy. Phase 2 will be to modify blades of existing WTs with our technology and test demonstrate in the operational environment.

Conecta tu I+D

Entra hoy

¿Olvidé mi contraseña?

Financiación

Empresas

CTIs/Universidades

Proyectos

Investigadores