Innovating Works

EQUINOX

Financiado
A novel process for manufacturing complex shaped Fe Al intermetallic parts resis...
A novel process for manufacturing complex shaped Fe Al intermetallic parts resistant to extreme environments There is a need to find solutions to replace Critical Raw Materials (CRMs) such as Chromium, Nickel, Molybdenium and Vanadium in high volume end consumer products. Steels and superalloys with considerable amounts of these CRMs are... There is a need to find solutions to replace Critical Raw Materials (CRMs) such as Chromium, Nickel, Molybdenium and Vanadium in high volume end consumer products. Steels and superalloys with considerable amounts of these CRMs are widely used in many industrial applications, particularly under extreme conditions where corrosion and wear resistance are needed. It is generally accepted, that intermetallics in particular low cost FeAl offer outstanding material properties. Unfortunately it is difficult to translate their properties to real products, as intermetallics suffer from low ductility at ambient temperature and poor machinability. The impact of FeAl intermetallics as a low cost Cr-free alternative for stainless steel would therefore be much higher if a cost effective industrial process would be available, that allows to manufacture complex 3-D geometries of almost unlimited shapes from small grain size (0.1-5 µm) high ductility material. The main objective of EQUINOX is to develop a novel process that allows to substitute Cr/Ni based (stainless) steel parts used in high volume end consumer products such as in the lock industry, electronics, process industry and automotive industry with a novel near net shape production technology for a new class of highly advanced ductile Fe-Al based intermetallics. Ductility at low to medium temperatures, while maintaining good tensile strength and optimum level of residual stress will be based on a radical new production process that use abundant raw material Fe3O4 and Al2O3. ver más
31/07/2019
NATIONAL TECHNICAL...
5M€
Duración del proyecto: 43 meses Fecha Inicio: 2015-12-15
Fecha Fin: 2019-07-31

Línea de financiación: concedida

El organismo H2020 notifico la concesión del proyecto el día 2019-07-31
Línea de financiación objetivo El proyecto se financió a través de la siguiente ayuda:
SC5-12b-2015: Materials under extreme conditions
Cerrada hace 9 años
Presupuesto El presupuesto total del proyecto asciende a 5M€
Líder del proyecto
ETHNICON METSOVION POLYTECHNION No se ha especificado una descripción o un objeto social para esta compañía.
Perfil tecnológico TRL 4-5