Innovating Works

MAIER FERROPLAST

Activa
Mostrando 1 al 20 de 27 resultados
BIORING: Engineering high performance biocoatings from renewable reactive building blocks AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTÍFICAS tramitó un HORIZON EUROPE: UV curable polyurethane (PU) coatings play a major role in a wide range of industries, due to their versatility, excellent performance and energy-efficient production and application. The global PU co...
2023-05-22 | Financiado
REVOLUTION: Supporting the Electric Vehicle REVOLUTION through maximising EV Range and End-of-Life Vehicle Recovery through optimisation of recycled plastics and advanced light materials FARPLAS OTOMOTIV ANONIM SIRKETI tramitó un H2020: REVOLUTION focusses on overcoming the challenges hindering the use of recycled materials, but more broadly, restricting the widespread adoption of circular economy principles in the automotive industr...
2021-01-01 | Financiado
INN-PRESSME: open INNovation ecosystem for sustainable Plant-based nano-enabled biomateRials deploymEnt for packaging, tranSport and conSuMEr goods TEKNOLOGIAN TUTKIMUSKESKUS VTT OY tramitó un H2020: INN-PRESSME aims at developing and implementing a sustainable OITB to support European companies to scale up their nano-enabled biomaterials and processes from TRL 4-5 to 7. We will focus on (nano)cel...
2021-01-01 | Financiado
CREAToR: Collection of raw materials, Removal of flAme reTardants and Reuse of secondary raw materials FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V. tramitó un H2020: CREAToR focusses on process development and demonstration (to TRL 5) to remove hazardous, already banned bromine-containing flame-retardants from waste streams using continuous purification technologi...
2019-06-01 | Financiado
LEE-BED: Innovation test bed for development and production of nanomaterials for lightweight embedded electronics TEKNOLOGISK INSTITUT tramitó un H2020: LEE-BED brings together world leading European RTOs to establish an Open Innovation Test Bed to de-risk and accelerate the development and manufacturing of nanomaterials and lightweight embedded elect...
2019-01-01 | Financiado
Repair3D: Recycling and Repurposing of Plastic Waste for Advanced 3D Printing Applications WARRANT HUB SPA tramitó un H2020: The project aims at the development of innovative reclamation and repurposing routes for end-of-life plastic and carbon fibre reinforced polymer (CFRP) components. This will be achieved by employing a...
2019-01-01 | Financiado
PROMETHEUS: Pulsed Rapid ultra-short laser surface texturing for Manufacture of FlexiblE and CusTomisEd ProdUctS EUROPEAN FEDERATION FOR WELDING JOINING AND CUTTING tramitó un H2020: PROMETHEUS will deliver the next generation in high power ultra-short pulse laser surface processing. The project will develop key enabling component technologies including; ultra-short pulse laser ar...
2019-01-01 | Financiado
DECOAT: Recycling of coated and painted textile and plastic materials CENTRE SCIENTIFIQUE TECHNIQUE DELINDUSTRIE TEXTILE BELGE ASBL tramitó un H2020: The main goal of DECOAT is to enable circular use of textiles and plastic parts with (multilayer) ‘coatings’, which are typically not recyclable yet. These ‘coatings’ comprise functional and performan...
2019-01-01 | Financiado
POLYNSPIRE: Demonstration of Innovative Technologies towards a more Efficient and Sustainable Plastic Recycling FUNDACION CIRCE CENTRO DE INVESTIGACION DE RECURSOS Y CONSUMOS ENERGETICOS tramitó un H2020: The main objective of POLYNSPIRE is to demonstrate a set of innovative, cost-effective and sustainable solutions, aiming at improving the energy and resource efficiency of post-consumer and post-indus...
2018-09-01 | Financiado
ECOBULK: Circular Process for Eco-Designed Bulky Products and Internal Car Parts Universidad Politécnica de Cataluña tramitó un H2020: ECOBULK through a large scale demonstration effort will contribute to closing the loop of composite products in the automotive, furniture and building sectors by promoting greater re-use, upgrade, ref...
2017-06-01 | Financiado
BIOMOTIVE: Advanced BIObased polyurethanes and fibres for the autoMOTIVE industry with increased environmental sustainability SELENA LABS SPOLKA Z OGRANICZONA ODPOWIEDZIALNOSCIA tramitó un H2020: Vehicles are composed by different materials and a noticeable and fundamental fraction of them (20% w/w) is constituted by plastic material, among which polyurethanes. PU is fundamental since, thanks...
2017-06-01 | Financiado
FiberEUse: Large scale demonstration of new circular economy value-chains based on the reuse of end-of-life fiber reinforced composites. POLITECNICO DI MILANO tramitó un H2020: Glass and carbon fiber reinforced polymer composites (GFRP and CFRP) are increasingly used as structural materials in many manufacturing sectors like transport, constructions and energy due to their b...
2017-06-01 | Financiado
EIROS: Erosion and Ice Resistant cOmposite for Severe operating conditions TWI LIMITED tramitó un H2020: In the wind power generation, aerospace and other industry sectors there is an emerging need to operate in the low temperature and highly erosive environments of extreme weather conditions. Such condi...
2016-03-08 | Financiado
BIO4SELF: Biobased self-functionalised self-reinforced composite materials based on high performance nanofibrillar PLA fibres CENTRE SCIENTIFIQUE TECHNIQUE DELINDUSTRIE TEXTILE BELGE ASBL tramitó un H2020: BIO4SELF aims at fully biobased self-reinforced polymer composites (SRPC). To produce the SRPCs two polylactic acid (PLA) grades are required: a low melting temperature (Tm) one to form the matrix and...
2016-03-01 | Financiado
RTC-2016-4887-4: Nuevos recubrimientos auto-reparantes para piezas plásticas de automoción en base a poliuretanos tradicionales y poliuretanos verdes REACTIVE MAIER FERROPLAST tramitó un AEI: Partiendo de diferentes moléculas reactivas patentadas por el grupo de trabajo, y que proporcionan capacidad autorreparable a diferentes sistemas poliuretano (PU), el proyecto REACTIVE, coordinado por...
2016-01-01 | Financiado
IZADI-NANO2INDUSTRY: Injection moulding, casting and coating PILOTS for the production of improved components with nano materials for automotive, construction and agricultural machinery. FUNDACION TECNALIA RESEARCH & INNOVATION tramitó un H2020: In the frame of previous FP6 and FP7 projects with involvement of IZADI-NANO2INDUSTRY consortium members nanotechnologies have demonstrated their effectiveness for enhancing materials and manufactur...
2015-11-01 | Financiado
BEinCPPS: Business Experiments in Cyber Physical Production Systems POLITECNICO DI MILANO tramitó un H2020: BEinCPPS Innovation Action aims to integrate and experiment a CPS-oriented Future Internet-based machine-factory-cloud service platform firstly intensively in five selected Smart Specialization Strate...
2015-11-01 | Financiado
Trash-2-Cash: Trash-2-Cash: Designed high-value products from zero-value waste textiles and fibres via design driven technologies RISE RESEARCH INSTITUTES OF SWEDEN AB tramitó un H2020: Within Trash-2-Cash, growing problems with paper fibre waste from the paper industry and textile fibre waste, originating from a continuously increasing textile consumption, will be solved through des...
2015-06-01 | Financiado
ROLL-OUT: High-performance, Flexible, AUTOnomous Systems manufactured with Unique, Industrial ROLL-to-roll equipments TEKNOLOGIAN TUTKIMUSKESKUS VTT OY tramitó un H2020: This R&I action will focus on optimally combining traditional roll-to-roll (R2R) compatible fabrication technologies such as printing with unique R2R sputtering, ALD and heterogeneous integration for...
2015-01-01 | Financiado
SCAIL-UP: SCALING-UP OF THE ALUMINIUM PLATING PROCESS FROM IONIC LIQUIDS MAIER FERROPLAST tramitó un FP7: The main objective of this project is to develop a radically new manufacturing industrial green process based on the electrodeposition of aluminium from ionic liquids and post-processed the aluminium...
2013-11-01 | Financiado
* Datos extraídos de la documentos o webs disponibles en diferentes organismos públicos.