HORIZON EUROPE
European
ExpectedOutcome:Projects’ results are expected to contribute to all of the following expected outcomes:
Lower cost, higher efficiency and power density electric motors for mass produced cars and vans, with a design-to-X approach enabling easy dismantling and recyclability and a reduced use of (rare) resources through the development or application of alternative materials or advanced configurations.Lower electric vehicles (EV) cost and improved range and, therefore, a wider market penetration.Improved motor design and development processes, considering a full product life-cycle assessment in a circular economy environment, for lower total energy and resources consumption.European job creation/retention by developing a world-leading design and production base, including supplying SMEs.
Scope:Electrical machines are a fundamental part of zero emission powertrains for all classes of road vehicles, but the target of this topic is the core market (with powertrains of 50-120kW continuous power).
Proposals are expected to address all the following:
Increasing primary efficiency, in particular by widening the high efficiency area and compactn...
see more
ExpectedOutcome:Projects’ results are expected to contribute to all of the following expected outcomes:
Lower cost, higher efficiency and power density electric motors for mass produced cars and vans, with a design-to-X approach enabling easy dismantling and recyclability and a reduced use of (rare) resources through the development or application of alternative materials or advanced configurations.Lower electric vehicles (EV) cost and improved range and, therefore, a wider market penetration.Improved motor design and development processes, considering a full product life-cycle assessment in a circular economy environment, for lower total energy and resources consumption.European job creation/retention by developing a world-leading design and production base, including supplying SMEs.
Scope:Electrical machines are a fundamental part of zero emission powertrains for all classes of road vehicles, but the target of this topic is the core market (with powertrains of 50-120kW continuous power).
Proposals are expected to address all the following:
Increasing primary efficiency, in particular by widening the high efficiency area and compactness, for example through topology or operational improvements, inclusion of increased features in integrated solutions, analysis of performance aspects over the machine-in-system life-cycle.Demonstrate the following specific targets (percentages with respect to automotive state of the art in 2020): Continuous power densities >23kW/litre and >7 kW/kg or continuous torque densities > 50Nm/litre and >20Nm/kg, for the complete motor including its cooling, allowing global performance optimisation specific for the category and type of vehicle;A 20% reduction in losses during typical vehicle operation;A reduction in the use of rare resources by 60%;Unit cost for the complete motor at mass production levels (100.000 units/year) < 6€/kW;A recyclability rate >60%, or demonstrating the possibility of “functional” recycling of critical raw materials by repurposing magnets without extracting the single rare elements, thus keeping a higher share of the value. Increase high system voltages offering new opportunities for readdressing the current versus voltage trade-offs, throughout the vehicle systems and in aspects of the recharging infrastructure, duly considering potential impacts.Guarantee the heat rejection of high energy density motors through multiphysics models in order an optimal design (use of rare resources, reduction in losses, high efficiency).Novel manufacturing process supporting increased integration, enabling, amongst other things, improved thermal control.The use of alternative architectures and materials to the currently used rare earths-based magnets and configurations. Recyclability plus life-cycle environmental impact aspects need to be considered, aiming at the best compromise with other performance parameters to reach the stated outcomes. If composite reinforced materials (CRM) are included in the design, the development of processes for the economic recycling of at least 60% of any rare materials needs to be included: only this additional work will justify the use of up to EUR 2 million of the expected EU contribution.The proposed motor concepts are expected to comply with automotive standards, given the normal dynamic and duty-cycle requirements, reliability, EMC etc. The proposed concepts should consider the motor (integration of electronics, excluding their development at component level), and integration of any related transmission. The concept has to be validated through representative duty-cycle evaluation, as a minimum on the test bed or, optionally with minimum-change integration, on an existing vehicle.The provision of a digital-twin of the concept, in-line with current best practice modelling and simulation standards, is required. This topic implements the co-programmed European Partnerships on ‘Towards zero emission road transport’ (2ZERO).
Specific Topic Conditions:Activities are expected to achieve TRL 5-7 by the end of the project – see General Annex B.
Cross-cutting Priorities:Artificial IntelligenceCo-programmed European PartnershipsDigital Agenda
see less
Consortium characteristics
:
The aid is European, you can apply to this line any company that is part of the European Community.
characteristics of the Proyecto
Expenses related to personnel working directly on the project are based on actual hours spent, based on company costs, and fixed ratios for certain employees, such as the company's owners.
Payments to external third parties to perform specific tasks that cannot be performed by the project beneficiaries.
They include the acquisition of equipment, amortization, material, licenses or other goods and services necessary for the execution of the project
Miscellaneous expenses such as financial costs, audit certificates or participation in events not covered by other categories
Overhead costs not directly assignable to the project (such as electricity, rent, or office space), calculated as a fixed 25% of eligible direct costs (excluding subcontracting).
Characteristics of financing
Additional information about the call
other advantages
similar aids
| Abierta
| Próximamente