Innovating Works
HORIZON-CL3-2024-BM-01-02
HORIZON-CL3-2024-BM-01-02: Interoperability for border and maritime surveillance and situational awareness
Expected Outcome:Projects’ results are expected to contribute to some or all of the following outcomes:
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 20-11-2024.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Hace 4 día(s) del cierre de la convocatoria y aún no tenemos información sobre los proyectos financiados, puede que esta información se publique pronto.
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

Expected Outcome:Projects’ results are expected to contribute to some or all of the following outcomes:

Increased border surveillance capability, better performing and more cost-efficient, with data and fundamental rights protection by design;Improved surveillance and situational awareness of sea borders, but also of maritime infrastructures as harbours and commercial and civilian maritime security, including in key areas such as the Arctic;Improved multi-level, multi-authority and cross-border (among Member States and Associated Countries practitioners) collaboration thanks to better interoperability of sensing, analysis and C2 systems. Scope:Authorities performing surveillance of maritime borders and maritime wide areas use a range of technologies, and receive a range of information, to monitor wide areas, detect threats or crises, and respond to them. However, these inputs are not always merged into common command-and-control (C2) systems that can inform rapid decision-making.

The proposed solution(s) should allow improved interoperability (at both back-end and front-end levels), independently of the supplier of the equipment, and ideally interchangeab... ver más

Expected Outcome:Projects’ results are expected to contribute to some or all of the following outcomes:

Increased border surveillance capability, better performing and more cost-efficient, with data and fundamental rights protection by design;Improved surveillance and situational awareness of sea borders, but also of maritime infrastructures as harbours and commercial and civilian maritime security, including in key areas such as the Arctic;Improved multi-level, multi-authority and cross-border (among Member States and Associated Countries practitioners) collaboration thanks to better interoperability of sensing, analysis and C2 systems. Scope:Authorities performing surveillance of maritime borders and maritime wide areas use a range of technologies, and receive a range of information, to monitor wide areas, detect threats or crises, and respond to them. However, these inputs are not always merged into common command-and-control (C2) systems that can inform rapid decision-making.

The proposed solution(s) should allow improved interoperability (at both back-end and front-end levels), independently of the supplier of the equipment, and ideally interchangeability that enables exchange of information among authorities that use different systems. Compatibility and integration with other information sharing environments, including the Common Information Sharing Environment (CISE) is essential in order to support the cross-sectoral and cross-border exchange of information.

The proposed solution(s) can include the design of open architecture C2 systems, including open standards for APIs and bias-free data models.

The proposed solution(s) should enable simultaneous connection of different sensors (or of different data, or of different assets, depending by the module) by different suppliers, the flexible tasking and monitoring of surveillance assets like RPAS, and the visualization and manipulation of the data in a single user interface in a seamless way. This will support practitioners to exploit their technology stack in an agnostic way.

The proposed solution(s) should allow for seamless connectivity between C2 systems from different authorities, and at different coordination levels; include cybersecurity measures and information access segregation capabilities; include concepts of operation, standard operating procedures and common lexicon for joint operations using interoperable systems through the proposed solution(s).

While the project will mainly focus on enabling capabilities through interoperability and interchangeability, proposals that in the process aim at advancing certain technological components, and integrating them into the solution, are welcome.

Assuming the project delivers on its goals, EU and Member States authorities should plan to take up the results of the research when compatible with applicable legislation using the financial support of the Border Management and Visa Instrument (BMVI).

Improving energy efficiency and environmental impact aspects of new security technologies for this capability (e.g. low environmental footprint, low emissions, circular economy aspects and/or self-sustained equipment) would be desirable.

Examples of technologies and approaches that can be explored by the research projects include (non-prescriptive and non-exhaustive): open architecture; user interface and experience; artificial intelligence; UxV; wide-area and long-endurance RPAS and integrated, wide-area RPAS cooperative tasking and management; remote sensors (such as LIDAR or FMCW) on UxVs; vessels-as-sensors; advanced mesh connectivity; automated analysis of abnormal or non-cooperative vessels’ behaviour; Virtual and Augmented Reality; standardized mission data models for RPAS tasking and monitoring, ; and/or over-the-horizon detection technologies.

Research projects should consider, build on (if appropriate) and not duplicate previous research, including but not limited to research by other relevant EU Framework Programmes projects on security research. Proposals should also clearly demonstrate how they aim to complement and avoid overlaps with actions undertaken in the European Defence Fund and its precursors (the European Defence Industrial Development Programme (EDIDP) and the Preparatory Action on Defence research (PADR)), based on the information publicly available[1] and while maintaining a focus on civilian applications only.

Proposals should delineate the plans for further development to subsequent TRLs as well as uptake (industrialisation, commercialisation, acquisition and/or deployment) at national and EU level, should the research deliver on its goals.

Proposals submitted under this topic are expected to address the priorities of the European Border and Coast Guard and of its Agency (Frontex). This should start from the definition of requirements and the design phase of their work, including basing on the EBCG Capability Roadmap when available; and on the engagement with the Agency during the implementation of the project. This perspective should be considered and planned when drafting proposals. Proposals should foresee that Frontex will observe projects’ pilots and demonstrations, with the aim of facilitating future uptake of innovations for the border and coast guard community.

Synergies within civil security can be an asset, for example with Disaster-Resilient Society and Fighting Crime and Terrorism.

[1] See for instance:

- relevant work programmes of the EDF (https://defence-industry-space.ec.europa.eu/eu-defence-industry/european-defence-fund-edf_en) and of the DEP (https://digital-strategy.ec.europa.eu/en/activities/work-programmes-digital)

And information on ongoing projects of:

- the EDF (https://ec.europa.eu/info/funding-tenders/opportunities/portal/screen/programmes/edf)

- the DEP (https://ec.europa.eu/info/funding-tenders/opportunities/portal/screen/programmes/digital);

Visit the following links for more information on past projects of the:

- EDF (https://ec.europa.eu/info/funding-tenders/opportunities/portal/screen/opportunities/projects-results;programCode=EDF)

- EDIDP (https://defence-industry-space.ec.europa.eu/eu-defence-industry/european-defence-industrial-development-programme-edidp_en)

- PADR (https://defence-industry-space.ec.europa.eu/eu-defence-industry/preparatory-action-defence-research-padr_en).

ver menos

Temáticas Obligatorias del proyecto: Temática principal: The project aims to enhance border surveillance and situational awareness, especially at sea and maritime infrastructures, promoting collaboration, data protection, and system interoperability through novel technologies like Earth Observation and C2 systems, ensuring multi-level, cross-border cooperation among practitioners for effective emergency response and management.
Maritime Security And Surveillance Arctic Ocean Surveillance Interoperable Communications Artificial Intelligence in Security Cybersecurity Measures Energy Efficiency in Security Systems Privacy by Design Implementation Digital Agenda Implementation Border and External Security Management Earth Observation Applications Maritime Safety Procedures Command and Control Systems Surveillance Technologies Environmental Impact Assessment Circular Economy Practices Virtual and Augmented Reality Applications

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: *Presupuesto para cada participante en el proyecto
Requisitos técnicos: The project is expected to result in increased border surveillance capability, enhancing data protection and fundamental rights, improving situational awareness at sea borders and maritime infrastructures, promoting collaboration among authorities for better interoperability and efficient decision-making through advanced technologies and interoperable systems. The project is expected to result in increased border surveillance capability, enhancing data protection and fundamental rights, improving situational awareness at sea borders and maritime infrastructures, promoting collaboration among authorities for better interoperability and efficient decision-making through advanced technologies and interoperable systems.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Subcontracting costs.
Purchase costs.
Other cost categories.
Indirect costs.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 6:. Representa un paso importante en demostrar la madurez de una tecnología. Se construye un prototipo de alta fidelidad que aborda adecuadamente las cuestiones críticas de escala, que opera en un entorno relevante, y que debe ser a su vez una buena representación del entorno operativo real. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
Para el presupuesto subvencionable la intensidad de la ayuda en formato fondo perdido podrá alcanzar desde un 70% hasta un 100%.
The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities. The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities.
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.
Certificado DNSH: Los proyectos presentados a esta línea deben de certificarse para demostrar que no causan perjuicio al medio ambiente. + info

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
Deducción I+D+i:
0% 25% 50% 75% 100%
La empresa puede aplicar deducciones fiscales en I+D+i de los gastos del proyecto y reducir su impuesto de sociedades. + info