HORIZON EUROPE
Cerrada
JTI-CS2-2017-CfP07-ENG-01-26
Innovative acoustic fan frame liners technologies for UHBR
European
Specific Challenge:Acoustic fan frame liners are key technological components for Next Gen UHBR to ensure continuous Aircraft noise reduction while architecture evolved on low Fuel Burn and so Low C02 architecture. The objective is to develop innovative acoustic fan frame liner panels able to reduce more efficiently UHBR fan noise signature while satisfying challenging engine integration constraints. Design and manufacture maturation works of tunable fan frame liners is to be performed and performance assessed by tests. Please refer to the full topic descriptions document published in this call.
Sólo fondo perdido
0 €
European
This call is closed
This line is already closed so you can't apply. It closed last day 27-02-2018.
An upcoming call for this aid is expected, the exact start date of call is not yet clear.
Luckily, we have achieved the list of financed projects!
Presentation:
Consortium
Consortium:
Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Minimum number of participants.
This aid finances
Proyectos:
project objective:
Specific Challenge:Acoustic fan frame liners are key technological components for Next Gen UHBR to ensure continuous Aircraft noise reduction while architecture evolved on low Fuel Burn and so Low C02 architecture. The objective is to develop innovative acoustic fan frame liner panels able to reduce more efficiently UHBR fan noise signature while satisfying challenging engine integration constraints. Design and manufacture maturation works of tunable fan frame liners is to be performed and performance assessed by tests. Please refer to the full topic descriptions document published in this call.
Consortium characteristics
Scope European :
The aid is European, you can apply to this line any company that is part of the European Community.
:
The aid is European, you can apply to this line any company that is part of the European Community.
Tipo y tamaño de organizaciones:
The necessary consortium design for the processing of this aid needs:
characteristics of the Proyecto
Requisitos de diseño por participante:
Duración:
Requisitos técnicos: Specific Challenge:Acoustic fan frame liners are key technological components for Next Gen UHBR to ensure continuous Aircraft noise reduction while architecture evolved on low Fuel Burn and so Low C02 architecture. The objective is to develop innovative acoustic fan frame liner panels able to reduce more efficiently UHBR fan noise signature while satisfying challenging engine integration constraints. Design and manufacture maturation works of tunable fan frame liners is to be performed and performance assessed by tests. Please refer to the full topic descriptions document published in this call.
Specific Challenge:Acoustic fan frame liners are key technological components for Next Gen UHBR to ensure continuous Aircraft noise reduction while architecture evolved on low Fuel Burn and so Low C02 architecture. The objective is to develop innovative acoustic fan frame liner panels able to reduce more efficiently UHBR fan noise signature while satisfying challenging engine integration constraints. Design and manufacture maturation works of tunable fan frame liners is to be performed and performance assessed by tests. Please refer to the full topic descriptions document published in this call.
Do you want examples? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Financial Chapters:
The chapters of financing expenses for this line are:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Madurez tecnológica:
The processing of this aid requires a minimum technological level in the project of TRL 5:.
Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:
Characteristics of financing
Intensidad de la ayuda:
Sólo fondo perdido
+ info
Lost Fund:
1. Countries eligible for funding: described in the Clean Sky 2 Work Plan.
2. Eligibility and admissibility conditions: described in the Clean Sky 2 Work Plan.
Proposal page limits and layout: Please refer to Part B of the proposal template in the submission tool below.
3. Evaluation
Evaluation criteria, scoring and thresholds: described in the Clean Sky 2 Work Plan.
Submission and evaluation processes: described in the Clean Sky 2 Rules for submission, evaluation, selection, award and review procedures of calls for proposals.
4. Indicative time for evaluation and grant agreement: maximum 8 months from the date of closure of the call.
5. Proposal templates and model grant agreements (MGA):
Proposal templates are available after entering the submission tool below.
H2020 Clean Sky 2 JU MGA for Members
H2020 Clean Sky 2 JU MGA for Partners - Multi-Beneficiary
H2020 Clean Sky 2 JU MGA for Partners - Mono-Beneficiary
H2020 Annotated Grant Agreement
6. Additional provisions:
Clean Sky 2 Budget Flexibility: described in the Clean Sky 2 JU Work Plan.
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information... 1. Countries eligible for funding: described in the Clean Sky 2 Work Plan.
2. Eligibility and admissibility conditions: described in the Clean Sky 2 Work Plan.
Proposal page limits and layout: Please refer to Part B of the proposal template in the submission tool below.
3. Evaluation
Evaluation criteria, scoring and thresholds: described in the Clean Sky 2 Work Plan.
Submission and evaluation processes: described in the Clean Sky 2 Rules for submission, evaluation, selection, award and review procedures of calls for proposals.
4. Indicative time for evaluation and grant agreement: maximum 8 months from the date of closure of the call.
5. Proposal templates and model grant agreements (MGA):
Proposal templates are available after entering the submission tool below.
H2020 Clean Sky 2 JU MGA for Members
H2020 Clean Sky 2 JU MGA for Partners - Multi-Beneficiary
H2020 Clean Sky 2 JU MGA for Partners - Mono-Beneficiary
H2020 Annotated Grant Agreement
6. Additional provisions:
Clean Sky 2 Budget Flexibility: described in the Clean Sky 2 JU Work Plan.
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in Annex L of the H2020 Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs. See the Online Manual.
Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
8. Additional documents:
Clean Sky 2 Joint Technical Programme
Clean Sky 2 JU Financial Rules
Clean Sky 2 JU Regulation of Establishment
H2020 Regulation of Establishment
H2020 Rules for Participation
H2020 Specific Programme
2. Eligibility and admissibility conditions: described in the Clean Sky 2 Work Plan.
Proposal page limits and layout: Please refer to Part B of the proposal template in the submission tool below.
3. Evaluation
Evaluation criteria, scoring and thresholds: described in the Clean Sky 2 Work Plan.
Submission and evaluation processes: described in the Clean Sky 2 Rules for submission, evaluation, selection, award and review procedures of calls for proposals.
4. Indicative time for evaluation and grant agreement: maximum 8 months from the date of closure of the call.
5. Proposal templates and model grant agreements (MGA):
Proposal templates are available after entering the submission tool below.
H2020 Clean Sky 2 JU MGA for Members
H2020 Clean Sky 2 JU MGA for Partners - Multi-Beneficiary
H2020 Clean Sky 2 JU MGA for Partners - Mono-Beneficiary
H2020 Annotated Grant Agreement
6. Additional provisions:
Clean Sky 2 Budget Flexibility: described in the Clean Sky 2 JU Work Plan.
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information... 1. Countries eligible for funding: described in the Clean Sky 2 Work Plan.
2. Eligibility and admissibility conditions: described in the Clean Sky 2 Work Plan.
Proposal page limits and layout: Please refer to Part B of the proposal template in the submission tool below.
3. Evaluation
Evaluation criteria, scoring and thresholds: described in the Clean Sky 2 Work Plan.
Submission and evaluation processes: described in the Clean Sky 2 Rules for submission, evaluation, selection, award and review procedures of calls for proposals.
4. Indicative time for evaluation and grant agreement: maximum 8 months from the date of closure of the call.
5. Proposal templates and model grant agreements (MGA):
Proposal templates are available after entering the submission tool below.
H2020 Clean Sky 2 JU MGA for Members
H2020 Clean Sky 2 JU MGA for Partners - Multi-Beneficiary
H2020 Clean Sky 2 JU MGA for Partners - Mono-Beneficiary
H2020 Annotated Grant Agreement
6. Additional provisions:
Clean Sky 2 Budget Flexibility: described in the Clean Sky 2 JU Work Plan.
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in Annex L of the H2020 Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs. See the Online Manual.
Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
8. Additional documents:
Clean Sky 2 Joint Technical Programme
Clean Sky 2 JU Financial Rules
Clean Sky 2 JU Regulation of Establishment
H2020 Regulation of Establishment
H2020 Rules for Participation
H2020 Specific Programme
Guarantees:
No existen condiciones financieras para el beneficiario.
Additional information about the call
incentive effect:
Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda.
+ info.
Respuesta Organismo:
Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
We do not know the total budget of the line
minimis:
Esta línea de financiación NO considera una “ayuda de minimis”.
You can consult the regulations
here.
other advantages
SME seal:
Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-CS2-CFP07-2017-02
Innovative acoustic fan frame liners technologies for UHBR
Specific Challenge:Acoustic fan frame liners are key technological components for Next Gen UHBR to ensure continuous Aircraft noise reductio...
Sin info.
JTI-CS2-2017-CfP07-ENG-01-31
Unsteady pressure sensor for high pressure and hot environment
en consorcio:
Specific Challenge:Development and delivery of 8 probes for unsteady pressure measurements in harsh conditions: 15bars, 1400K and a 5kHz+ ba...
Cerrada
does 7 years
| next call scheduled for the month of
JTI-CS2-2017-CfP07-ENG-01-28
Innovative HPC Flow Treatment Technologies: Design & Experimental Validation Using Advanced Measurement Techniques
en consorcio:
Specific Challenge:The call aims to develop and validate HPC flow treatment technologies to address HPC aerodynamic challenges associated wi...
Cerrada
does 7 years
| next call scheduled for the month of
JTI-CS2-2017-CfP07-ENG-01-29
Characterization of the resistance of TiAl turbine blades to impact
en consorcio:
Specific Challenge:The purpose is to investigate the impact resistance of TiAl turbine blades through original experiments, and to develop a...
Cerrada
does 7 years
| next call scheduled for the month of
JTI-CS2-2017-CfP07-ENG-03-21
Novel Bearings
en consorcio:
Specific Challenge:Bearings currently proposed for future UltraFan® engine concepts require oil for lubrication and cooling, adding consider...
Cerrada
does 7 years
| next call scheduled for the month of
JTI-CS2-2017-CfP07-ENG-01-24
Crowned spline surface treatment and modelling
en consorcio:
Specific Challenge:UHBR required highly loaded crowned spline. Specific surface treatment to reduce risk of wear and improve loading capacit...
Cerrada
does 7 years
| next call scheduled for the month of
Noticias relevantes
02-04-2025:
Se ha cerrado la convocatoria Innovative acoustic fan frame liners technologies for UHBR en HORIZON EUROPE