Innovating Works
LC-MG-1-1-2018
LC-MG-1-1-2018: InCo flagship on reduction of transport impact on air quality
Specific Challenge:The air quality situation in Europe has not sufficiently improved for some pollutants and significant exceedances are still found, for example, for particles, ozone and nitrogen oxides, particularly in areas affected by specific environmental or industrial conditions.. Similar situations occur in many cities around the world, and this is the reason for designing this international cooperation flagship.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 31-01-2018.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Specific Challenge:The air quality situation in Europe has not sufficiently improved for some pollutants and significant exceedances are still found, for example, for particles, ozone and nitrogen oxides, particularly in areas affected by specific environmental or industrial conditions.. Similar situations occur in many cities around the world, and this is the reason for designing this international cooperation flagship.

High hopes are pinned on zero tailpipe emission technologies that might solve the problem in the longer term, particularly in the road sector. However, fleet renewal is too slow to just wait for all vehicles on the road to be replaced by electrified ones in order to solve the air quality issue. Also, emissions from other sectors, such as ships and aircraft in ports, internal waterways and airports, can contribute significantly to the problem, and zero emission technologies are not often available.

It is therefore urgent to address in as many ways as possible the reduction of the impact of the existing internal combustion transport fleets and support local authorities and other regulatory bodies with the provision of appropriate/advanced to... ver más

Specific Challenge:The air quality situation in Europe has not sufficiently improved for some pollutants and significant exceedances are still found, for example, for particles, ozone and nitrogen oxides, particularly in areas affected by specific environmental or industrial conditions.. Similar situations occur in many cities around the world, and this is the reason for designing this international cooperation flagship.

High hopes are pinned on zero tailpipe emission technologies that might solve the problem in the longer term, particularly in the road sector. However, fleet renewal is too slow to just wait for all vehicles on the road to be replaced by electrified ones in order to solve the air quality issue. Also, emissions from other sectors, such as ships and aircraft in ports, internal waterways and airports, can contribute significantly to the problem, and zero emission technologies are not often available.

It is therefore urgent to address in as many ways as possible the reduction of the impact of the existing internal combustion transport fleets and support local authorities and other regulatory bodies with the provision of appropriate/advanced tools. Monitoring of the car fleet, for instance, can detect high emitters, allowing to provide information to authorities for possible cases of defeat devices, tampering, poor durability of depollution systems.

In the case of tampering, the legal situation varies among member states and needs to be clarified in view of facilitating enforcement.

The choices of customers buying new vehicles can be oriented towards cleaner vehicles by making visible which are those that have an overall better performance (i.e. as a consumer information measure, separate from EU certified type-approval testing, while users of existing polluting vehicles could be encouraged to use them in a more environmentally friendly way.

It is also important to verify the performance of On Board Detection (OBD) systems and of periodic inspections and improve them where appropriate.

On board measurement of pollutants could enable new implementation approaches to regulation showing on the one hand how much each driver pollutes (helping in the eco-driving effort) whilst on the other hand allowing a real "polluter pays" approach to certification, taxation and traffic regulation (the needed technology will be explored in LC-MG-1-4-2018, together with research on hardening de-pollution systems against tampering).

Apart from road vehicles, airports and ports can strongly contribute to poor air quality, it is therefore important to quantify their impact and monitor their evolution.

Finally, the health impact of extremely fine particles and of Volatile and Semi-Volatile Organic Compounds (VOCs and SVOCs free or absorbed in the particles), is still not well understood. Such ultra-fine particles have been proven to pass the alveoli, placental and brain barriers and they can reach other organs through the blood stream and generate serious health impacts which need further research.


Scope:Given the policy relevance of the topic, the selected consortia will regularly share their findings with relevant European Commission services. Proposals will have to address one of the following subtopics and clearly indicate which subtopic they are addressing:

A) Low-emission oriented driving, management and assistance. This area aims at exploring the impact of the user (including his driving behaviour and choices in maintaining the vehicle) on emission production:

Driving behaviour exploration: PEMS[1] driving measurement campaigns to assess driver behaviour variability and correlate it with real powertrain emission, and (if needed by lab measurement and modelling) brakes and road/tires emissions; Derivation of low polluting-emissions driving practices and dissemination through awareness campaigns. The collected data should be of adequate quality to be also usable as input for future implementation in driving assistance tools and automated driving, as well as traffic management; Assessment of the impact of other user behaviours such as poor maintenance or tampering. All aspects and causes should be studied, including an assessment of the real effectiveness of OBD and periodic inspections, of the legal situation of tampering in each member state (for both sales of devices and installation) and of the most effective ways to induce car owners not to tamper and to properly maintain their vehicles (considering both technical and economic reasons for their behaviour); Assessment of the potential impact of retrofits[2], both for light and heavy duty road vehicles and NRMM[3] (including the development of methodologies to verify a level of durability appropriate for the application) and promotion of their application in cities with pollution problems. In line with the strategy for EU international cooperation in research and innovation (COM(2012)497) international cooperation is encouraged, in particular with China and other Asian and/or CELAC countries.

B) Starting from recently defined emissions indicators (RDE test results including NOx max and PN max values, WLTP CO2 emissions), development of a 12 to 18 month project to timely develop support to informed consumer choice by defining a holistic testing and scoring mechanism. This should be capable of assessing all vehicles (conventional and electrified) and lead to a single "GREEN VEHICLE index". Such index should encompass all of the relevant criteria, e.g. tailpipe CO2, and polluting emissions such as NOx/NO2, hydrocarbons and particles, noise, performance and operating cost. The developed methodology should be fine-tuned in a pilot phase on a sufficiently large number of vehicles to ensure that the results are comparable and provide a fair and reliable assessment. Such an index could result in a public awareness scheme (running after project end) capable of orienting eco-conscious consumer choice, and to create a virtuous circle (as achieved by EURONCAP for safety) creating competition on who brings to market the cleanest vehicles. The mechanism should complement (not overlap with) the results of regulatory real-driving emissions (RDE) tests with an aim to maximise the coverage of real-world driving situations and provide relevant information. Particular attention should be paid to the ways in which the variability of real-world emissions performance is communicated, and what usage patterns deliver the best performance (being therefore complementary to the study and awareness raising activities in Subtopic A).

C) Sensing and monitoring emission in urban road transportation system. This area intends to urgently provide a means to monitor fleet-wide on-road emissions, to detect and repress any emission-affecting modifications of individual vehicles (tampering) or bad maintenance/poor after-treatment system durability/OBD ineffectiveness, to support local air quality plans, and to help national and local enforcement authorities in identifying and prosecuting infringing vehicles.

Remote sensing of road vehicle emissions (contactless measurements from the roadside, portals or from chasing vehicles); further technological development of available techniques is needed to improve performance, reduce costs, facilitate use by unskilled personnel and achieve a broader deployment potential; Establishment of a proper data infrastructure built around vehicle registration databases, traffic management measures and air quality monitoring systems; Demonstration of the system in several cities; In line with the strategy for EU international cooperation in research and innovation (COM(2012)497), international cooperation is encouraged, in particular with China.

D) Cost effective enforcement of shipping related emissions legislation, both at the EU and global level, is essential for the expected environmental improvements to be achieved. To support the enforcement, assess their effectiveness and to identify potential future gaps it is necessary to develop, evaluate and demonstrate cost effective systems to measure the airborne emissions of pollutants from a vessel under real operational conditions ( e.g using on board systems) and to target ships for inspection and the enforcement of emission limits.

For coastal, urban and port areas, develop measuring technologies and 'beyond state of the art' modelling tools to assess the contribution of air emissions from ships and their comparative impact on air quality and health building also on projects such as 'Interreg Clean North Sea Shipping (CNSS) and the LIFE project 'Clean Inland Shipping' (CLINSH).

In addition to characterising and quantifying particulate matter (in particular, the most harmful, including ultrafine), such systems should also be able to simultaneously measure other relevant pollutants including SOx and NOx.

In line with the strategy for EU international cooperation in research and innovation (COM(2012)497), international cooperation is encouraged, in particular with the involvement of the largest ports and regulating authorities and other relevant bodies within the Asian region as well as in the frame of the activities of the International Maritime Organisation to which EU Member States and global maritime nations are parties.

E) Measurement of airborne pollutants emissions from aircraft under parking (with functioning APU), taxiing, take-off and climb-out conditions and under different climate conditions (In addition to characterising and quantifying particulate matter down to at least 10nm, systems should also be able to simultaneously measure other relevant pollutants including SOx and NOx). An assessment of pollutants' transport and impact on air quality in and around airports, in a form potentially suitable for regulation should be performed.

In line with the Union’s strategy for international cooperation in research and innovation (COM(2012)497), international cooperation is encouraged, in particular with Asia, CELAC and the US.

F) In-vitro and in-vivo assessment of health effects of ultrafine nanoparticles (VOCs and SVOCs) emitted from engines of the different transport modes particularly when using fuels with high aromatic content. Focus should be on understanding the biological processes leading to acute genotoxic and systemic effects in the lungs and, in particular, beyond.

The Commission considers that proposals requesting a contribution from the EU between EUR 2 and 5 million would allow the different specific challenges to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.


Expected Impact:All the above actions contribute to the UN's Sustainable Development Goals (SDG), in particular SDG 3 ("Ensure healthy lives and promote wellbeing for all at all ages") and 11 (“Make cities and human settlements inclusive, safe, resilient and sustainable”) through:

Reduction of emissions from the existing combustion-engined car fleet (A, C); Reduction of unnecessary driver-induced emissions though a better awareness by the public of their role in controlling polluting emissions (A) ; Increase of low emitting vehicle sales by providing more information to guide buyers towards the cleanest available vehicles (B); Reduction of transport-related emissions though the improvements of detection and enforcement against vehicles with tampering, defeat devices or durability issue, as well as of ships not complying with emissions regulations, i.e. not using clean low-sulphur fuels, suitable engine parameters for NOx reduction or properly activating de-pollution devices where appropriate (C, D) ; Better understanding of the impact of the different transport modes through monitoring detection and modelling of emissions in the existing road vehicle fleet as well as ships and aircraft (C, D, E) ; Improved and more comprehensive data for risk assessment from air pollutants from different transport modes and identification of cost effective reduction measures (F); Provide technical evidence to assess gaps in current regulation of vehicles and air quality (All).
Cross-cutting Priorities:Socio-economic science and humanitiesInternational cooperation


[1]Portable Emissions Measurement Systems

[2]For instance those resulting from the Horizon Prize for the cleanest engine retrofit.

[3]Non-Road Mobile Machinery, i.e. earth moving machines, locomotives etc).

ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Specific Challenge:The air quality situation in Europe has not sufficiently improved for some pollutants and significant exceedances are still found, for example, for particles, ozone and nitrogen oxides, particularly in areas affected by specific environmental or industrial conditions.. Similar situations occur in many cities around the world, and this is the reason for designing this international cooperation flagship. Specific Challenge:The air quality situation in Europe has not sufficiently improved for some pollutants and significant exceedances are still found, for example, for particles, ozone and nitrogen oxides, particularly in areas affected by specific environmental or industrial conditions.. Similar situations occur in many cities around the world, and this is the reason for designing this international cooperation flagship.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Amortizaciones.
Activos.
Otros Gastos.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
1. Eligible countries: described in Annex A of the Work Programme.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
 
2. Eligibility and admissibility conditions: described in Annex B and Annex C of the Work Programme. 
 
Proposal page limits and layout: please refer to Part B of the proposal template in the submission system below.
 
3. Evaluation:
Evaluation criteria, scoring and thresholds are described in Annex H of the Work Programme.  
Submission and evaluation processes are described in the Online Manual.
Grants will be awarded to proposals according to the ranking list. However, in order to ensure a balanced portfolio of supported actions, at least the highest-ranked proposal per sub-topic will be funded provided that it attains all thresholds.
4. Indicative time for evaluation and grant agreements:    
Information on the outcome of evaluation (two-stage call):
For stage 1: maximum 3 months from the deadline for submission.
For stage 2: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
 
5. Proposal templates, evalu...
1. Eligible countries: described in Annex A of the Work Programme.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
 
2. Eligibility and admissibility conditions: described in Annex B and Annex C of the Work Programme. 
 
Proposal page limits and layout: please refer to Part B of the proposal template in the submission system below.
 
3. Evaluation:
Evaluation criteria, scoring and thresholds are described in Annex H of the Work Programme.  
Submission and evaluation processes are described in the Online Manual.
Grants will be awarded to proposals according to the ranking list. However, in order to ensure a balanced portfolio of supported actions, at least the highest-ranked proposal per sub-topic will be funded provided that it attains all thresholds.
4. Indicative time for evaluation and grant agreements:    
Information on the outcome of evaluation (two-stage call):
For stage 1: maximum 3 months from the deadline for submission.
For stage 2: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
 
5. Proposal templates, evaluation forms and model grant agreements (MGA):
Research and Innovation Action:
Specific provisions and funding rates
Proposal templates are available after entering the submission tool below
Standard evaluation form
General MGA - Multi-Beneficiary
Annotated Grant Agreement
 
6. Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
8. Additional documents:
1. Introduction WP 2018-20       
11. Smart, green and integrated transport WP 2018-20      
18. Dissemination, Exploitation and Evaluation WP 2018-20
General annexes to the Work Programme 2018-2020
Legal basis: Horizon 2020 Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme
 
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in Annex L of the Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs. See the Online Manual.
Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
 
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-MG-2018-2019-2020 InCo flagship on reduction of transport impact on air quality Specific Challenge:The air quality situation in Europe has not sufficiently improved for some pollutants and significant exceedances are sti...
Sin info.
LC-MG-1-15-2020 Towards global environmental regulation of supersonic aviation
en consorcio: Specific Challenge:This action is part of the Aviation International Cooperation Flagship called "Safer and Greener Aviation in a Smaller Wo...
Cerrada hace 4 años | Próxima convocatoria prevista para el mes de
LC-MG-1-12-2020 Cities as climate-resilient, connected multimodal nodes for smart and clean mobility: new approaches towards demonstrating and testing innovative solutions
en consorcio: Specific Challenge:Europe's urban areas are struggling to develop themselves into well-connected multimodal and multi-usage nodes for smart...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
LC-MG-1-13-2020 Decarbonising long distance shipping
en consorcio: Specific Challenge:In 2018 historic targets were agreed within International Maritime Organization (IMO) to cut the total net global GHG emi...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
LC-MG-1-14-2020 Understanding and mitigating the effects on public health of emerging non-regulated nanoparticle emissions issues and noise
en consorcio: Specific Challenge:Growing road traffic in Europe results in detrimental effects on the environment and public health in spite of the gradua...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
LC-MG-1-7-2019 Future propulsion and integration: towards a hybrid/electric aircraft (InCo flagship)
en consorcio: Specific Challenge:This action is part of the Aviation International Cooperation Flagship called "Safer and Greener Aviation in a Smaller Wo...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de