HORIZON EUROPE
Europeo
Specific Challenge:The full recyclability of composites through the effective separation and recovery of their components is still an issue. This is mainly due to the adhesives used to bind the different layers and materials together. The fossil-based bonding components that are currently used cannot easily be separated from the other components, nor can they be recycled together with the matrix material.
Industry can improve the recyclability of composites by designing bio-based bonding materials that will decompose [1] under specific conditions (e.g. pH, temperature, microorganisms). These new bonding materials will replace fossil-based counterparts in composites and allow multilayer plastics and composites to be recycled more easily.
A useful concept when considering recyclability is ‘extended producer responsibility’ (EPR) [2]. EPR makes manufacturers of composites – or any product – responsible for the entire life cycle of the product, especially for the take-back, recycling and final disposal. EPR is crucial for creating a sustainable and circular bioeconomy. EPR will be an important input to some quickly expanding application areas, such as 3D print...
ver más
Specific Challenge:The full recyclability of composites through the effective separation and recovery of their components is still an issue. This is mainly due to the adhesives used to bind the different layers and materials together. The fossil-based bonding components that are currently used cannot easily be separated from the other components, nor can they be recycled together with the matrix material.
Industry can improve the recyclability of composites by designing bio-based bonding materials that will decompose [1] under specific conditions (e.g. pH, temperature, microorganisms). These new bonding materials will replace fossil-based counterparts in composites and allow multilayer plastics and composites to be recycled more easily.
A useful concept when considering recyclability is ‘extended producer responsibility’ (EPR) [2]. EPR makes manufacturers of composites – or any product – responsible for the entire life cycle of the product, especially for the take-back, recycling and final disposal. EPR is crucial for creating a sustainable and circular bioeconomy. EPR will be an important input to some quickly expanding application areas, such as 3D printing of cellulose-based materials, which offers new opportunities for regional industries.
The specific challenge is to increase the recyclability of composites.
[1] See remarks on biodegradability in the Introduction of the 2020 Annual Work Plan.
[2] http://ec.europa.eu/environment/archives/waste/eu_guidance/introduction.html
Scope:Develop bio-based bonding materials for composites to promote the separation of these composites into their components and thus make them more recyclable.
The scope of this topic is to develop degradable bonding materials for composites, and to design and develop adequate materials for composites themselves to maximise their recyclability.
The scope of this topic includes attempting to recycle multilayer fibrous materials that are used in many market applications, including the construction industry. Proposals should include EPR considerations for a sustainable end of life of these materials.
The scope also includes: (i) novel research into the origin of fibre materials used in composites; and (ii) searching for the optimum combination of bonding materials to maximise the recyclability of composites.
Since the recyclability of materials can only benefit from the availability of suitable recycling facilities and capabilities, proposals must include a description of a system/method to process the recyclable material.
Proposals are also expected to draft guidelines for collecting and directing the recyclable materials to these facilities. These guidelines must also include optimal ways for handling and pre-treating (if needed).
Proposals should address all the requirements for RIAs shown in Table 3 of the Introduction of the 2020 Annual Work Plan.
The technology readiness level (TRL) at the end of the project should be 4-5 and not exceeding 5. Proposals should clearly state the starting and end TRLs of the key technology or technologies targeted in the project.
INDICATIVE FUNDING:It is considered that proposals requesting a contribution of between EUR 2 million and EUR 5 million would be able to address this specific challenge appropriately. However, this does not preclude the submission and selection of proposals requesting other amounts.
Expected Impact:
EXPECTED IMPACTS LINKED TO BBI JU KPIS:
contribute to KPI 1 — create at least one new cross-sector interconnection in the bio-based economy; contribute to KPI 2 — set the basis for at least one new bio-based value chain; contribute to KPI 5 — validate at least one new bio-based material; contribute to KPI 8 — validate at least one new or improved processing technology reflecting the ‘TRL gain’ since the start of the project. ENVIRONMENTAL IMPACTS:
improved end of life of composites, by reducing the amount of such materials diverted to landfilling or incinerating; reduce the amount of resources (materials, energy) and time required to separate composite materials into their constituting elements (before recycling); contribute to the EU’s 2050 long-term strategy for a climate-neutral Europe by replacing fossil-based material with bio-based, renewable material. ECONOMIC IMPACTS:
reduce the amount of resources (materials, energy) and time required to separate composite materials into their constituent components (before recycling); show with documented experimental validation that the performance of the new bio-based bonding agents is at least comparable with fossil-based counterparts in the target application(s). TYPE OF ACTION: Research and Innovation action.
Cross-cutting Priorities:Cross-cutting Key-Enabling Technologies (KETs)
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
2. Eligibility and admissibility conditions: described in Annex B and Annex C of the Work Programme, with the derogation described in part 2.2.3 of the BBI JU Work Plan.
Proposal page limits and layout: Please refer to Part B of the proposal template in the submission tool below.
3. Evaluation:
Evaluation criteria, scoring and thresholds are described in Annex H of the H2020 Work Programme, with the exceptions described in part 2.2.6 of the BBI JU Work Plan.
Submission and evaluation processes are described in the Online Manual and the BBI JU Guide for applicants (RIA-IA-CSA).
4. Indicative time for evaluation and grant agreement:
Information on the outcome of evaluation: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
5. Proposal templates, evaluation forms and model gr... 1. Eligible countries: described in Annex A of the H2020 Work Programme.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects. See the information in the Online Manual.
2. Eligibility and admissibility conditions: described in Annex B and Annex C of the Work Programme, with the derogation described in part 2.2.3 of the BBI JU Work Plan.
Proposal page limits and layout: Please refer to Part B of the proposal template in the submission tool below.
3. Evaluation:
Evaluation criteria, scoring and thresholds are described in Annex H of the H2020 Work Programme, with the exceptions described in part 2.2.6 of the BBI JU Work Plan.
Submission and evaluation processes are described in the Online Manual and the BBI JU Guide for applicants (RIA-IA-CSA).
4. Indicative time for evaluation and grant agreement:
Information on the outcome of evaluation: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
5. Proposal templates, evaluation forms and model grant agreements (MGA):
BBI Research and Innovation Action (BBI-RIA)
Specific rules and funding rates: described in 2.2.4 of the BBI JU Work Plan.
Proposal templates are available after entering the submission tool below.
Standard evaluation form
BBI JU MGA - Multi-Beneficiary
BBI JU MGA Annex 2
BBI JU MGA Annex 4
H2020 Annotated Grant Agreement
BBI Innovation Action Demonstration (BBI-IA-DEMO)
and BBI Innovation Action Flagship (BBI-IA-FLAG)
Specific rules and funding rates: described in 2.2.4 of the BBI JU Work Plan.
Proposal templates are available after entering the submission tool below.
Standard evaluation form (IA)
BBI JU MGA - Multi-Beneficiary
BBI JU MGA Annex 2
BBI JU MGA Annex 4
H2020 Annotated Grant Agreement
BBI Coordination and Support Action (BBI-CSA)
Specific rules and funding rates: described in 2.2.4 of the BBI JU Work Plan.
Proposal templates are available after entering the submission tool below.
Standard evaluation form
BBI JU MGA Multi-Beneficiary
BBI JU MGA Annex 2
BBI JU MGA Annex 4
H2020 Annotated Grant Agreement
6. Additional requirements:
Technology readiness levels (TRL)
Members of consortium are required to conclude a consortium agreement, in principle prior to the signature of the grant agreement.
7. Open access must be granted to all scientific publications resulting from Horizon 2020 actions.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Open access to research data
The Open Research Data Pilot has been extended to cover all Horizon 2020 topics for which the submission is opened on 26 July 2016 or later. Projects funded under this topic will therefore by default provide open access to the research data they generate, except if they decide to opt-out under the conditions described in Annex L of the H2020 main Work Programme. Projects can opt-out at any stage, that is both before and after the grant signature.
Note that the evaluation phase proposals will not be evaluated more favourably because they plan to open or share their data, and will not be penalised for opting out.
Open research data sharing applies to the data needed to validate the results presented in scientific publications. Additionally, projects can choose to make other data available open access and need to describe their approach in a Data Management Plan.
Projects need to create a Data Management Plan (DMP), except if they opt-out of making their research data open access. A first version of the DMP must be provided as an early deliverable within six months of the project and should be updated during the project as appropriate. The Commission already provides guidance documents, including a template for DMPs. See the Online Manual.
Eligibility of costs: costs related to data management and data sharing are eligible for reimbursement during the project duration.
The legal requirements for projects participating in this pilot are in the article 29.3 of the Model Grant Agreement.
8. Additional documents
BBI JU Work Plan
Table 3 of BBI JU Work Plan (standard requirements for proposals)
BBI JU Scientific Innovation and Research Agenda (SIRA)
BBI JU Derogation to H2020 Rules for Participation
BBI JU Regulation of Establishment
H2020 Regulation of Establishment
H2020 Rules for Participation
H2020 Specific Programme
BBI JU Call 2020 FAQs for applicants
BBI JU Guide for applicants
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta