Innovating Works
INNOSUP-06-2016
INNOSUP-06-2016: Capacity-building for National Contact Points (NCPs) for SMEs and Access to Risk Finance under Horizon 2020
Specific Challenge:Facilitate trans-national co-operation between NCPs focused on the Horizon 2020 specific objective "Innovation in SMEs" and "Access to Risk Finance" – including those established in countries associated with Horizon 2020 and interested third countries – with a view to identifying and sharing good practices and raising the general standard of support to programme applicants, taking into account the diversity of the research and innovation-driven SME community, and complementarity with other support entities and networks, for instance the Enterprise Europe Network.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 19-01-2016.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Specific Challenge:Facilitate trans-national co-operation between NCPs focused on the Horizon 2020 specific objective "Innovation in SMEs" and "Access to Risk Finance" – including those established in countries associated with Horizon 2020 and interested third countries – with a view to identifying and sharing good practices and raising the general standard of support to programme applicants, taking into account the diversity of the research and innovation-driven SME community, and complementarity with other support entities and networks, for instance the Enterprise Europe Network.


Scope:Support will be given to a consortium of formally nominated NCPs in the areas of "Innovation in SMEs" and "Access to Risk Finance", and support to SMEs in Horizon 2020 at large. The activities should be tailored according to the nature of the areas, and the priorities of the NCPs concerned. Various mechanisms may be included, such as benchmarking, joint workshops, enhanced cross-border brokerage events, and specific training sessions linked to Access to Risk Finance, Innovation in SMEs and SMEs in Horizon 2020. Special attention should be... ver más

Specific Challenge:Facilitate trans-national co-operation between NCPs focused on the Horizon 2020 specific objective "Innovation in SMEs" and "Access to Risk Finance" – including those established in countries associated with Horizon 2020 and interested third countries – with a view to identifying and sharing good practices and raising the general standard of support to programme applicants, taking into account the diversity of the research and innovation-driven SME community, and complementarity with other support entities and networks, for instance the Enterprise Europe Network.


Scope:Support will be given to a consortium of formally nominated NCPs in the areas of "Innovation in SMEs" and "Access to Risk Finance", and support to SMEs in Horizon 2020 at large. The activities should be tailored according to the nature of the areas, and the priorities of the NCPs concerned. Various mechanisms may be included, such as benchmarking, joint workshops, enhanced cross-border brokerage events, and specific training sessions linked to Access to Risk Finance, Innovation in SMEs and SMEs in Horizon 2020. Special attention should be given to enhance the competence of NCPs, including helping less experienced NCPs rapidly acquire the know-how accumulated in other countries.

The focus throughout should be on issues specific to "Innovation in SMEs" and "Access to Risk Finance" and supporting SMEs in optimising participation to Horizon 2020, while ensuring complementarity with activities of other NCP networks and the Enterprise Europe Network in the domain of SME support. The project should promote coordination with other NCP thematic networks, in particular in relation to the NCP network project for quality standards and horizontal issues. The proposal should show how this will be achieved.

Only NCPs who have been officially appointed by the relevant national authorities are eligible to participate in and receive funding for this action. In line with the objectives of the EU strategy for international cooperation in research and innovation, participation of NCPs from third countries is welcome.

The consortium should have a good representation of experienced and less experienced NCPs. Submission of a single proposal is encouraged. NCPs from EU Member States or Associated Countries choosing not to participate as a member of the consortium should be identified and the reason explained in the proposal. These NCPs are nevertheless invited and encouraged to participate in the project activities (e.g. workshops), and the costs incurred by the consortium for such participation (e.g. travel costs paid by the consortium) may be included in the estimated budget and be eligible for funding by the Commission.

The Commission considers that proposals requesting a contribution from the EU in the range of EUR 2 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.

The Commission will only fund one proposal under this topic, for an initial duration of 30 months.


Expected Impact: An improved and professionalised NCP service across Europe, thereby helping simplify access to Horizon 2020 calls, lowering the entry barriers for newcomers, and raising the average quality of proposals submitted. A more consistent level of NCP support services across Europe and in connection with the rest of the world.
Delegation Exception Footnote:This activity directly aimed at supporting National Contact Points is excluded from the delegation to EASME and will be implemented by the Commission services.


Cross-cutting Priorities:International cooperation


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Specific Challenge:Facilitate trans-national co-operation between NCPs focused on the Horizon 2020 specific objective "Innovation in SMEs" and "Access to Risk Finance" – including those established in countries associated with Horizon 2020 and interested third countries – with a view to identifying and sharing good practices and raising the general standard of support to programme applicants, taking into account the diversity of the research and innovation-driven SME community, and complementarity with other support entities and networks, for instance the Enterprise Europe Network. Specific Challenge:Facilitate trans-national co-operation between NCPs focused on the Horizon 2020 specific objective "Innovation in SMEs" and "Access to Risk Finance" – including those established in countries associated with Horizon 2020 and interested third countries – with a view to identifying and sharing good practices and raising the general standard of support to programme applicants, taking into account the diversity of the research and innovation-driven SME community, and complementarity with other support entities and networks, for instance the Enterprise Europe Network.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Amortizaciones.
Activos.
Otros Gastos.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Please read carefully all provisions below before the preparation of your application.
 
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to China, Japan, Republic of Korea, Mexico, Russia, Taiwan).
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme, with the following exceptions:  Only entities entrusted by national or regional governments to develop/or implement innovation support programmes for SMEs are eligible to apply.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme
3.2 Submission and evaluation process: Guide to the submission and evaluation process
     
Indicative timetable for evaluation and grant agreement:
Information on the outcome of evaluation: maximum 5 months after the corresponding cut-off date.
Signature of grant agreements: maximum 8 months af...
Please read carefully all provisions below before the preparation of your application.
 
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to China, Japan, Republic of Korea, Mexico, Russia, Taiwan).
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme, with the following exceptions:  Only entities entrusted by national or regional governments to develop/or implement innovation support programmes for SMEs are eligible to apply.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme
3.2 Submission and evaluation process: Guide to the submission and evaluation process
     
Indicative timetable for evaluation and grant agreement:
Information on the outcome of evaluation: maximum 5 months after the corresponding cut-off date.
Signature of grant agreements: maximum 8 months after the corresponding cut-off date.
 
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Coordination and Support Action:
Specific provisions and funding rates
Proposal templates are available after entering the submission tool below.
Standard proposal template
Standard evaluation form
H2020 MGA -Multi-Beneficiary Lump Sum 
Annotated Grant Agreement
 
Additional provisions:
Horizon 2020 budget flexibility
 
Additional documents:
H2020 Work Programme 2016-17: Innovation in SMEs
H2020 Work Programme 2016-17: General Annexes
H2020 Work Programme 2016-17: Dissemination, Exploitation and Evaluation
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 - Regulation of Establishment
Legal basis: Horizon 2020 Specific Programme
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-INNOSUP-2016-2017 Capacity-building for National Contact Points (NCPs) for SMEs and Access to Risk Finance under Horizon 2020 Specific Challenge:Facilitate trans-national co-operation between NCPs focused on the Horizon 2020 specific objective "Innovation in SMEs" a...
Sin info.
INNOSUP-08-2020 Pan-European advanced manufacturing assistance and training for SMEs
en consorcio:
Cerrada hace 1 año | Próxima convocatoria prevista para el mes de
INNOSUP-05-2018-2020 Cluster facilitated projects for new industrial value chains
en consorcio:
Cerrada hace 1 año | Próxima convocatoria prevista para el mes de
INNOSUP-10-2020 Closing the finance gap for IPR-driven start-ups and SMEs
en consorcio: Specific Challenge:Innovative European businesses, including start-ups and SMEs, face a real problem to attract suitable financing solutions...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
INNOSUP-07-2019 European Open Innovation network in advanced technologies
en consorcio: Specific Challenge:Open innovation is a paradigm that assumes that companies can benefit from external ideas/technologies (Outside-In) and v...
Cerrada hace 5 años | Próxima convocatoria prevista para el mes de
INNOSUP-02-2019-2020 European SME innovation Associate - pilot
en consorcio: Specific Challenge:The lack of access to skills, to latest knowledge and capacity to manage innovation processes effectively, have been iden...
Cerrada hace 6 años | Próxima convocatoria prevista para el mes de