HORIZON EUROPE
Europeo
Specific Challenge:Power electronic components, modules and systems including wide bandgap devices technology are of high strategic importance in Europe. It is still possible to retain parts of the value chain in Europe; the related application areas are based on the deep knowledge and market position in aerospace[1] and automotive industry, industrial electronics, energy transmission, renewable power generation (wind power, PV), healthcare, smart factories and prominent know-how for reliable materials for electronic assemblies. Contribution to the objectives of the SET-Plan in term of energy saving, efficiency, CO2 reduction are therefore part of this challenge.
Scope:The proposals should address the development of advanced, cost-effective, sustainable materials, architectures and processes for power electronics suitable for use in energy technologies.
The activities should focus on advanced materials for innovative power components and module, including packaging, new product development and application which will increase the reliability and operational lifespan of components under realistic and/or extreme conditions.
Considerable im...
ver más
Specific Challenge:Power electronic components, modules and systems including wide bandgap devices technology are of high strategic importance in Europe. It is still possible to retain parts of the value chain in Europe; the related application areas are based on the deep knowledge and market position in aerospace[1] and automotive industry, industrial electronics, energy transmission, renewable power generation (wind power, PV), healthcare, smart factories and prominent know-how for reliable materials for electronic assemblies. Contribution to the objectives of the SET-Plan in term of energy saving, efficiency, CO2 reduction are therefore part of this challenge.
Scope:The proposals should address the development of advanced, cost-effective, sustainable materials, architectures and processes for power electronics suitable for use in energy technologies.
The activities should focus on advanced materials for innovative power components and module, including packaging, new product development and application which will increase the reliability and operational lifespan of components under realistic and/or extreme conditions.
Considerable improvement of the operation of power-electronics devices based on the improved properties of the materials, device architectures, heat dissipation and/or processes should be addressed at component, module and system level. Realistic solution should be provided in term of operational characteristics like voltage, current level and sensitivity or switching frequencies or other relevant performance factors as well as in long term maintenance-free operation (resilience and reliability) with respect to the particular and stringent demand of the envisaged application.
Improvement in the cost and use effectiveness, including maintenance intensity should be quantified. Proposals may develop manufacturing concepts for the construction of components and modules with fewer production defects;
International cooperation with Japan[2] is encouraged to tackle societal challenges, which are global by nature;
The implementation of this topic is intended to start at TRL 4 and target TRL 6.
This topic addresses cross-KET activities.
The Commission considers that proposals requesting a contribution from the EU between EUR 5 and 8 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
Expected Impact: Substantial improvement of the wide bandgap semiconductors materials and device performance; Reduced long-term in-service degradation, lowering maintenance needs and costs; Time to market of new materials and devices will be optimised (shortened); Development of Wide Band Gap semiconductor technologies to bring them closer to the applications for the leadership of European sector of power electronics industries; Creation of smart global value chains that enable value capture to Europe. Proposals should include a business case and exploitation strategy, as outlined in the Introduction to the LEIT part of this Work Programme.
Cross-cutting Priorities:International cooperationOpen InnovationCross-cutting Key-Enabling Technologies (KETs)
[1]In the LEIT Space part of this Work programme, the topics COMPET-I-2016 and COMPET-I-2017 could also be of interest to certain applicants.
[2] Co-funding opportunities from the Japan Science and Technology Agency exist for Japanese partners. For more information, please consult http://www.jst.go.jp/sicp/announce_eujoint_03_GeneralInfo.html.
ver menos
Características del consorcio
:
La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Características del Proyecto
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Características de la financiación
LIST OF COUNTRIES and APPLICABLE RULES FOR FUNDING
described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to Australia, Brazil, Canada, China, Hong Kong &Macau, India, Japan, Republic of Korea, Mexico, Russia, Taiwan).
ELIGIBILITY and ADMISSIBILITY CONDITIONS
described in part B and C of the General Annexes of the General Work Programme.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
EVALUATION
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme , with the following exceptions:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4.
The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the... Please read carefully all provisions below before the preparation of your application.
LIST OF COUNTRIES and APPLICABLE RULES FOR FUNDING
described in part A of the General Annexes of the General Work Programme.
Note also that a number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon 2020 projects (follow the links to Australia, Brazil, Canada, China, Hong Kong &Macau, India, Japan, Republic of Korea, Mexico, Russia, Taiwan).
ELIGIBILITY and ADMISSIBILITY CONDITIONS
described in part B and C of the General Annexes of the General Work Programme.
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
EVALUATION
3.1 Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme , with the following exceptions:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4.
The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except, when comparing ex aequo proposals of different topics, the proposals will be ranked first according to the position in the topic ranked lists
3.2 Submission and evaluation process: Guide to the submission and evaluation process
INDICATIVE TIMETABLE for EVALUATION and GRANT AGREEMENT
Information on the outcome of two-stage evaluation:
For stage 1: maximum 3 months from the deadline for submission.
For stage 2: maximum 5 months from the deadline for submission.
Signature of grant agreements: maximum 8 months from the deadline for submission.
PROVISIONS, PROPOSAL TEMPLATES and EVALUATION FORMS
for the type of action under this topic
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template
Standard evaluation form
H2020 General MGA -Multi-Beneficiary
Annotated Grant Agreement
ADDITIONAL PROVISIONS
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
OPEN ACCESS
must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged.
Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
ADDITIONAL DOCUMENTS
Legal basis: Horizon 2020 - Regulation of Establishment
Legal basis: Horizon 2020 Rules for Participation
Legal basis: Horizon 2020 Specific Programme
H2020 Work Programme 2016-17: Introduction
H2020 Work Programme 2016-17: Introduction to Leadership in enabling and industrial technologies (LEITs)
H2020 Work Programme 2016-17: Nanotechnologies, advanced materials, advanced manufacturing and processing, biotechnology
H2020 Work Programme 2016-17: Cross-cutting activities (Focus Areas)
H2020 Work Programme 2016-17: Dissemination, Exploitation and Evaluation
H2020 Work Programme 2016-17: General Annexes
Información adicional de la convocatoria
Otras ventajas
Ayudas Similares
| Abierta
| Próximamente
| Abierta