Innovating Works
NMP-07-2015
NMP-07-2015: Additive manufacturing for tabletop nanofactories
Scope:Specific challenge: Additive manufacturing (AM) delivers a new manufacturing paradigm: it makes the rapid, distributive manufacture of complex objects possible, and has the potential to reduce waste. What is truly transformative about additive manufacturing is the potential to manufacture individual products anywhere in the world, and to customise each of them. Rather than make manufactured goods in one place and ship them around the world, additive manufacturing technologies, such as 3D printing makes it possible to send design blueprints instantaneously via the internet, and manufacture them when and where they are needed.
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 26-03-2015.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio.
Número mínimo de participantes.
Esta ayuda financia Proyectos: Objetivo del proyecto:

Scope:Specific challenge: Additive manufacturing (AM) delivers a new manufacturing paradigm: it makes the rapid, distributive manufacture of complex objects possible, and has the potential to reduce waste. What is truly transformative about additive manufacturing is the potential to manufacture individual products anywhere in the world, and to customise each of them. Rather than make manufactured goods in one place and ship them around the world, additive manufacturing technologies, such as 3D printing makes it possible to send design blueprints instantaneously via the internet, and manufacture them when and where they are needed.

3D printers are growing in sophistication, and can create increasingly complex objects, including those with different component parts. Breakthroughs in techniques such as metal sintering and processing of ceramic materials mean that 3D printers are no longer restricted to generic plastics. The use of nanoparticles in 3D printing is progressing rapidly, and could vastly increase the range of products that can be manufactured in this way.

Scope: As a part of a wider initiative towards nano-manufacturing, the objective of this topi... ver más

Scope:Specific challenge: Additive manufacturing (AM) delivers a new manufacturing paradigm: it makes the rapid, distributive manufacture of complex objects possible, and has the potential to reduce waste. What is truly transformative about additive manufacturing is the potential to manufacture individual products anywhere in the world, and to customise each of them. Rather than make manufactured goods in one place and ship them around the world, additive manufacturing technologies, such as 3D printing makes it possible to send design blueprints instantaneously via the internet, and manufacture them when and where they are needed.

3D printers are growing in sophistication, and can create increasingly complex objects, including those with different component parts. Breakthroughs in techniques such as metal sintering and processing of ceramic materials mean that 3D printers are no longer restricted to generic plastics. The use of nanoparticles in 3D printing is progressing rapidly, and could vastly increase the range of products that can be manufactured in this way.

Scope: As a part of a wider initiative towards nano-manufacturing, the objective of this topic is to advance the state-of-the art of AM materials through modification of their fundamental material properties using nanotechnology and to develop novel additive manufacturing techniques that incorporate new functionalities and/or significant performance increase, e.g. by utilising printable high-strength materials in the manufactured components. For example, carbon nanotube or other functional nano-structures could be embedded and combined with the printing process to perform electronic functions such as sensing and communications, or bio materials, such as flexible polymers or ceramics could be used to create bio-inspired structures.

For this topic, proposals should include an outline of the initial exploitation and business plans, which will be developed further in the proposed project.

Activities expected to focus on Technology Readiness Level 4-5. Implemented as cross-KET activities.

The Commission considers that proposals requesting a contribution from the EU between EUR 3 and 5 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.

Expected impact:

                Enabling Europe to compete at the forefront of the additive manufacturing revolution, which in the long term will lead into entire new production and consumption paradigms;

                Enabling manufacturing activities by SMEs to enter markets with innovations that were not possible before;

                Widening the range of available AM materials and functionalities in products will accelerate the transition of AM from mere prototyping towards production and use;

                Enabling functionality embedded in AM parts displaces the need for multiple manufacturing operations, making AM processes even more cost effective, including for small series production;

                Enabling the identification of future development needs in related fields, e.g. in seamless design-to-manufacturing software and standardization for material and process quality.

                Promoting safe-by-design approaches in collaboration with the EU nano-safety cluster and contributing towards the framework of EU nanosafety and regulatory strategies[1].

Type of action: Research & Innovation Actions

[1] EU Nano-safety strategy 2015-2020 and NanoReg project


ver menos

Temáticas Obligatorias del proyecto: Temática principal: Nano-technology Nano-materials (production and properties) Characterization methods of materials New materials: oxides alloys composite organic- Technology development

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: Scope:Specific challenge: Additive manufacturing (AM) delivers a new manufacturing paradigm: it makes the rapid, distributive manufacture of complex objects possible, and has the potential to reduce waste. What is truly transformative about additive manufacturing is the potential to manufacture individual products anywhere in the world, and to customise each of them. Rather than make manufactured goods in one place and ship them around the world, additive manufacturing technologies, such as 3D printing makes it possible to send design blueprints instantaneously via the internet, and manufacture them when and where they are needed. Scope:Specific challenge: Additive manufacturing (AM) delivers a new manufacturing paradigm: it makes the rapid, distributive manufacture of complex objects possible, and has the potential to reduce waste. What is truly transformative about additive manufacturing is the potential to manufacture individual products anywhere in the world, and to customise each of them. Rather than make manufactured goods in one place and ship them around the world, additive manufacturing technologies, such as 3D printing makes it possible to send design blueprints instantaneously via the internet, and manufacture them when and where they are needed.
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Los costes de personal subvencionables cubren las horas de trabajo efectivo de las personas directamente dedicadas a la ejecución de la acción. Los propietarios de pequeñas y medianas empresas que no perciban salario y otras personas físicas que no perciban salario podrán imputar los costes de personal sobre la base de una escala de costes unitarios
Purchase costs.
Los otros costes directos se dividen en los siguientes apartados: Viajes, amortizaciones, equipamiento y otros bienes y servicios. Se financia la amortización de equipos, permitiendo incluir la amortización de equipos adquiridos antes del proyecto si se registra durante su ejecución. En el apartado de otros bienes y servicios se incluyen los diferentes bienes y servicios comprados por los beneficiarios a proveedores externos para poder llevar a cabo sus tareas
Subcontracting costs.
La subcontratación en ayudas europeas no debe tratarse del core de actividades de I+D del proyecto. El contratista debe ser seleccionado por el beneficiario de acuerdo con el principio de mejor relación calidad-precio bajo las condiciones de transparencia e igualdad (en ningún caso consistirá en solicitar menos de 3 ofertas). En el caso de entidades públicas, para la subcontratación se deberán de seguir las leyes que rijan en el país al que pertenezca el contratante
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 5:. Los elementos básicos de la innovación son integrados de manera que la configuración final es similar a su aplicación final, es decir que está listo para ser usado en la simulación de un entorno real. Se mejoran los modelos tanto técnicos como económicos del diseño inicial, se ha identificado adicionalmente aspectos de seguridad, limitaciones ambiéntales y/o regulatorios entre otros. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
 
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of inf...
Please read carefully all provisions below before the preparation of your application.
List of countries and applicable rules for funding: described in part A of the General Annexes of the General Work Programme.
 
Eligibility and admissibility conditions: described in part B and C of the General Annexes of the General Work Programme.
 
Evaluation
3.1  Evaluation criteria and procedure, scoring and threshold: described in part H of the General Annexes of the General Work Programme, with the following exceptions:
For single-stage and second-stage evaluations, the threshold for the criteria Excellence and Impact will be 4. The overall threshold, applying to the sum of the three individual scores, will be 12.
In case of equal overall scores in the ranked list, the priority order of proposals will be established in accordance with part H of the General Annexes, except that proposals will be ranked on the basis of individual scores for the Impact criterion before the Excellence criterion.
3.2 Guide to the submission and evaluation process
 
Proposal page limits and layout: Please refer to Part B of the standard proposal template.
 
Indicative timetable for evaluation and grant agreement:
Information on the outcome of one-stage evaluation: maximum 5 months from the final date for submission.
Signature of grant agreements: maximum 3 months from the date of informing successful applicants.
 
Provisions, proposal templates and evaluation forms for the type(s) of action(s) under this topic:
Research and Innovation Action:
Specific provisions and funding rates
Standard proposal template (administrative forms and structure of technical annex)
Standard evaluation form
Annotated Model Grant Agreement
 
Additional provisions:
Horizon 2020 budget flexibility
Classified information
Technology readiness levels (TRL) – where a topic description refers to TRL, these definitions apply.
Financial support to Third Parties – where a topic description foresees financial support to Third Parties, these provisions apply.
 
Open access must be granted to all scientific publications resulting from Horizon 2020 actions, and proposals must refer to measures envisaged. Where relevant, proposals should also provide information on how the participants will manage the research data generated and/or collected during the project, such as details on what types of data the project will generate, whether and how this data will be exploited or made accessible for verification and re-use, and how it will be curated and preserved.
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda tiene efecto incentivador, por lo que el proyecto no puede haberse iniciado antes de la presentación de la solicitud de ayuda. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.
H2020-NMP-2014-2015 Additive manufacturing for tabletop nanofactories Scope:Specific challenge: Additive manufacturing (AM) delivers a new manufacturing paradigm: it makes the rapid, distributive manufacture of...
Sin info.
NMP-06-2015 Novel nanomatrices and nanocapsules
en consorcio: Scope:Specific challenge: Encapsulation technologies have been widely used for a long time in the pharmaceutical industry for drug delivery...
Cerrada hace 10 años | Próxima convocatoria prevista para el mes de
NMP-12-2015 Biomaterials for treatment and prevention of Alzheimer's disease
en consorcio: Scope:Specific challenge: An estimated 7.3 million Europeans between 30 and 99 years of age suffered from different types of dementias in th...
Cerrada hace 10 años | Próxima convocatoria prevista para el mes de
NMP-30-2015 Next generation tools for risk governance of nanomaterials
en consorcio: Scope:Specific challenge: The conventional risk assessment approach, i.e. deriving no-effect levels or limit values from dose-effect relatio...
Cerrada hace 10 años | Próxima convocatoria prevista para el mes de
NMP-02-2015 Integration of novel nano materials into existing production lines
en consorcio: Scope:Specific challenge: Nanomaterials are intended to improve the performance of existing production technologies, and to give new functio...
Cerrada hace 10 años | Próxima convocatoria prevista para el mes de
NMP-03-2015 Manufacturing and control of nanoporous materials
en consorcio: Scope:Specific challenge: There is a constantly growing interest in nanostructured porous materials, thanks to the many applications that ca...
Cerrada hace 10 años | Próxima convocatoria prevista para el mes de