Innovating Works

H2020

Cerrada
HORIZON-CL5-2023-D4-02-05
Supporting the creation of an accessible and inclusive built environment (Built4People Partnership)
ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 05-09-2023.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:

Improved accessibility[1] of the built environment for persons with disabilities and older persons, following a ‘design for all’ approach.Improved comfort for larger shares of the population.Increased uptake of accessible and inclusive active mobility solutions (walking and cycling) in support of healthy and sustainable lifestyles, while catering solutions for persons with reduced mobility.Improved sense of inclusiveness[2] and social cohesion in larger shares of the population.Availability of a common evaluation and certification framework for accessibility and inclusiveness of the built environment[3].Improved consideration of accessibility and inclusiveness in the transformation of the built environment towards sustainability, climate change mitigation and adaptation, in line with energy and climate ambitions.Reduced energy consumption and lifecycle GHG emissions of the facilities of the built environment.
Scope:The focus will be on the different facilities of the built environment (buildings, multi-modal hubs, public spaces and other infrastructure for peop... ver más

ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:

Improved accessibility[1] of the built environment for persons with disabilities and older persons, following a ‘design for all’ approach.Improved comfort for larger shares of the population.Increased uptake of accessible and inclusive active mobility solutions (walking and cycling) in support of healthy and sustainable lifestyles, while catering solutions for persons with reduced mobility.Improved sense of inclusiveness[2] and social cohesion in larger shares of the population.Availability of a common evaluation and certification framework for accessibility and inclusiveness of the built environment[3].Improved consideration of accessibility and inclusiveness in the transformation of the built environment towards sustainability, climate change mitigation and adaptation, in line with energy and climate ambitions.Reduced energy consumption and lifecycle GHG emissions of the facilities of the built environment.
Scope:The focus will be on the different facilities of the built environment (buildings, multi-modal hubs, public spaces and other infrastructure for people’s use) that are open to the public. Built environment professionals require support to design, plan, build and operate facilities that are accessible and inclusive. Design concepts should make these facilities accessible for persons with disabilities and fragile people, following an inclusive, ‘design for all’ approach.

Proposals are expected to address all of the following:

Develop innovative methods to ensure and facilitate the implementation of accessibility at all stages of design and construction processes, as well as the monitoring and testing of results.Demonstrate (and where applicable produce) innovative planning and design tools for new and existing buildings and/or multi-modal hubs and/or public spaces and/or other infrastructure for people’s use with the triple aim of: improving comfort (e.g. improving air quality, reducing noise or vibrations);making them accessible and inclusive for persons with disability and/or older persons;transforming the built environment towards sustainability (including social sustainability), climate change mitigation and adaptation, e.g. relying on nature-based solutions. Address the adaptability of the built environment over its lifecycle, to ensure flexibility for accessibility adaptations (e.g., in the case of changing needs of people with increasing disabilities and reducing mobility).Make the facilities of the built environment under consideration more energy efficient overall, therefore reducing GHG emissions.Ensure the involvement of persons with disabilities by means of a participatory approach.Consider the possible creation of new job opportunities that are concerned with implementing, monitoring and maintaining accessibility of the facilities of the built environment.Demonstrate the solutions in at least two demonstrators.Where applicable, investigate solutions aiming at removing barriers, improving storage of (cargo-)bicycles, improving charging possibilities for electric (cargo-)bicycles in an inclusive way (e.g., considering the specific needs of older persons, multi-generational groups, and persons with disabilities).Where applicable, design public spaces to promote soft and active modes of mobility through attractive, safe, and green infrastructure for healthier and environmentally friendly lifestyles, therefore lowering carbon emissions and noise pollution.Where applicable, develop solutions to ensure the mobility of person with disabilities (including visually impaired users) inside buildings in an autonomous, ubiquitous, and pervasive way.Where new digital tools are used in the built environment (including to address energy efficiency and comfort in buildings), ensure their accessibility for persons with disabilities and older persons.Ensure the project’s dissemination activities include actions targeted to contributing to the activities of the NEB Community, and to sharing information, best practice and results within the NEB Lab Infrastructure such as motorways is excluded from the scope.

Participation of / co-creation with relevant societal stakeholders should be part of the action. To this end, this topic requires the effective contribution of SSH disciplines and the involvement of SSH experts, institutions as well as the inclusion of relevant SSH expertise (including social innovation), to produce meaningful and significant effects enhancing the societal impact of the related research activities.

Proposals are expected to contribute to the activities of the Built4People partners and to the Built4People network of innovation clusters.

This topic implements the co-programmed European Partnership on ‘People-centric sustainable built environment’ (Built4People). As such, projects resulting from this topic will be expected to report on results to the European Partnership ‘People-centric sustainable built environment’ (Built4People) in support of the monitoring of its KPIs.


Specific Topic Conditions:Activities are expected to achieve TRL 6-8 by the end of the project – see General Annex B.




[1] Accessibility is meant as the removal and prevention of barriers that hinder the participation of persons with disabilities in society on equal basis with others. In this case the focus is on barriers in the built environment.

[2] Inclusiveness is meant as environments that reflect the diversity of society with full respect of the human rights and fundamental freedoms of all inhabitants.

[3] In line with relevant EU legislation (e.g., the European Accessibility Act Directive (EU) 2019/882) and European standards (e.g., EN 17210:2021).

ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:
Empresas Micro, Pequeña, Mediana, Grande
Centros Tecnológicos
Universidades
Organismos públicos

Características del Proyecto

Requisitos de diseño: *Presupuesto para cada participante en el proyecto Requisitos técnicos: ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes: ¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 6:. Representa un paso importante en demostrar la madurez de una tecnología. Se construye un prototipo de alta fidelidad que aborda adecuadamente las cuestiones críticas de escala, que opera en un entorno relevante, y que debe ser a su vez una buena representación del entorno operativo real. leer más.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities.
Condiciones: No existe condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea pero en los últimos 6 meses la línea ha concecido
Total concedido en los últimos 6 meses.
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.