Innovating Works

H2020

Cerrada
HORIZON-CL5-2021-D6-01-08
HORIZON-CL5-2021-D6-01-08: New delivery methods and business/operating models to green the last mile and optimise road transport
ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 19-10-2021.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:

Take up and upscaling of innovative, best practice and replicable safe and sustainable last mile solutions in the living labs[1] involved in the proposals, while facilitating the common lesson drawing and learning at European level, in order to contribute to the priorities of the European Green Deal, which stresses that ‘’transport should become drastically less polluting, especially in cities.”[2]Develop logistics hubs and micro consolidation centres. During the assessment process of possible locations, cooperation with local authorities is required. Locations should be checked against the sustainable mobility and logistics plans of the concerning city.Test and deploy new delivery methods (such as e-cargo bikes) in at least 3 cities/project. Optimise urban space, loads and reduce empty miles through dynamic routing, load policies, multi/single-brand parcel lockers and boxes.Demonstration of cost-efficient, zero-emission modes of last mile transport for urban and peri-urban deliveries in the living labs involved in the projects (as listed in the scope part below).Incre... ver más

ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:

Take up and upscaling of innovative, best practice and replicable safe and sustainable last mile solutions in the living labs[1] involved in the proposals, while facilitating the common lesson drawing and learning at European level, in order to contribute to the priorities of the European Green Deal, which stresses that ‘’transport should become drastically less polluting, especially in cities.”[2]Develop logistics hubs and micro consolidation centres. During the assessment process of possible locations, cooperation with local authorities is required. Locations should be checked against the sustainable mobility and logistics plans of the concerning city.Test and deploy new delivery methods (such as e-cargo bikes) in at least 3 cities/project. Optimise urban space, loads and reduce empty miles through dynamic routing, load policies, multi/single-brand parcel lockers and boxes.Demonstration of cost-efficient, zero-emission modes of last mile transport for urban and peri-urban deliveries in the living labs involved in the projects (as listed in the scope part below).Increased quality and liveability of urban and metropolitan areas by reducing road risk, congestion, air and noise pollution.Improve knowledge of user needs, habits and preferences in terms of deliveries by collecting and sharing information amongst public authorities and private companies aiming at clustering users while respecting GPDR.
Scope:The large scale introduction and application of cargo bikes, in urban and peri-urban areas has shown to be a game changer for cities: the image of cycling improves; general levels of cycling increase (both for freight and passengers); urban space is used more efficiently; air quality, noise and safety levels as well as quality of life improve. However, this innovative solution is present in only a few cities and at best in the starting phase in other European cities. Its full potential has not been achieved in any European city.

Projects should address both methodological and technical/vehicle aspects to help optimising last mile deliveries, where the benefits and how it can be replicated across several cities.

Demonstration of cleaner modes for last mile transport vehicles such as, electric assisted cycles (2/3/4 wheels), bikes and cargo bikes in combination with the testing of innovative tools such as dynamic e-routing, load policies, multi/single-brand parcel lockers and boxes, micro consolidation centres and zero emission freight in the urban context to measure their effects on optimisation (reducing empty miles), efficiency, and congestion reduction should be considered. Results could also contribute to better delivery technologies transforming the last mile such as camera-based object tracking, precise location brought by enhanced EU satellite navigation (GNSS) services, application of AI technologies and CCAM solutions to delivery services and advanced analysis based on driver apps. It is recommended the establishment of energy savings objectives (e.g. electricity) regarding micro-consolidation centres in relation to other traditional strategies.

Actions should focus on piloting cooperation with private logistics operators, local businesses and establish new models for addressing governance and management of logistics operations in urban and peri-urban areas. Projects should achieve cost-efficient and scale up potential and deployment of innovative and sustainable urban people and goods mobility solutions enabled by better governance and regulations, including procurement or white-label schemes as an efficient tool for achieving these goals.

A thorough evaluation, with a clear baseline in each city, should provide qualitative and quantitative information on the results of the local solutions implemented. The effectiveness of the proposed measures in achieving local policy objectives should be evaluated and the possible barriers to their broad take up and deployment identified, together with recommendations on how to overcome them. This should be accompanied by mechanisms for common lesson drawing and learning, within the project, between the projects funded under this topic and through the CIVITAS Initiative.

Proposals may include preparatory, take up and replication actions, research activities, as well as tools to support local planning and policy making.

A demonstrated contribution to the implementation of the cities’ Sustainable Urban Mobility Plans, without forgetting higher scales planning scope, is expected. If not already in place, the city can develop a Sustainable Urban Logistics Plan or other appropriate planning instrument to manage urban freight and logistics.

Funding for major infrastructure works is not covered by this action. Proposals should plan for an active collaboration within the CIVITAS initiative.

Social innovations should be considered, notably as new tools, ideas and methods leading to active citizen engagement and as drivers of social change, social ownership, and new social practices.

This topic requires the effective contribution of SSH disciplines and the involvement of SSH experts, institutions as well as the inclusion of relevant SSH expertise, in order to produce meaningful and significant effects enhancing the societal impact of the related research activities


Cross-cutting Priorities:Socio-economic science and humanitiesSocial InnovationSocietal Engagement


[1]At least three living lab cities should be included as demonstrators of the innovative solutions and at least three follower cities. At least one of the living labs and follower cities should be located in areas experiencing rapid economic and social change.

[2]https://eur-lex.europa.eu/resource.html?uri=cellar:b828d165-1c22-11ea-8c1f-01aa75ed71a1.0002.02/DOC_1&format=PDF

ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes: ExpectedOutcome:Project results are expected to contribute to all of the following expected outcomes:
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Subcontracting costs.
Purchase costs.
Other cost categories.
Indirect costs.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 6:. Representa un paso importante en demostrar la madurez de una tecnología. Se construye un prototipo de alta fidelidad que aborda adecuadamente las cuestiones críticas de escala, que opera en un entorno relevante, y que debe ser a su vez una buena representación del entorno operativo real. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Para el presupuesto subvencionable la intensidad de la ayuda en formato fondo perdido podrá alcanzar desde un 70% hasta un 100%.
The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities. The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities.
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.