Innovating Works

H2020

Cerrada
HORIZON-CL4-2021-TWIN-TRA...
HORIZON-CL4-2021-TWIN-TRANSITION-01-21: Design and optimisation of energy flexible industrial processes (Processes4Planet Partnership) (IA)
ExpectedOutcome:Projects are expected to contribute to the following outcomes:
Sólo fondo perdido 0 €
Europeo
Esta convocatoria está cerrada Esta línea ya está cerrada por lo que no puedes aplicar. Cerró el pasado día 23-09-2021.
Se espera una próxima convocatoria para esta ayuda, aún no está clara la fecha exacta de inicio de convocatoria.
Por suerte, hemos conseguido la lista de proyectos financiados!
Presentación: Consorcio Consorcio: Esta ayuda está diseñada para aplicar a ella en formato consorcio..
Esta ayuda financia Proyectos:

ExpectedOutcome:Projects are expected to contribute to the following outcomes:

Significant increase of the process flexibility and demand response towards the integration of variable energy sources, i.e., renewable energy sources, including possible onsite energy storage and conversion;Overall increased energy efficiency of the industrial process within the energy system;New digital tools that account for the energy availability to realise the additional flexibility of the process and that create connections to energy grid platforms for a more efficient energy management system;Cost reduction of the overall process through valorisation of excess streams into the energy system. Relevant indicators and metrics, with baseline values, should be clearly stated in the proposal


Scope:Flexibility solutions are key to achieve a renewable energy share to deliver the EU Green Deal objectives and which goes significantly beyond the current target of 32%. In the coming years, EU industries will need to adapt to the increased fluctuations in energy supply caused by the higher penetration of variable energy sources. Besides, an integrated energy system, linking d... ver más

ExpectedOutcome:Projects are expected to contribute to the following outcomes:

Significant increase of the process flexibility and demand response towards the integration of variable energy sources, i.e., renewable energy sources, including possible onsite energy storage and conversion;Overall increased energy efficiency of the industrial process within the energy system;New digital tools that account for the energy availability to realise the additional flexibility of the process and that create connections to energy grid platforms for a more efficient energy management system;Cost reduction of the overall process through valorisation of excess streams into the energy system. Relevant indicators and metrics, with baseline values, should be clearly stated in the proposal


Scope:Flexibility solutions are key to achieve a renewable energy share to deliver the EU Green Deal objectives and which goes significantly beyond the current target of 32%. In the coming years, EU industries will need to adapt to the increased fluctuations in energy supply caused by the higher penetration of variable energy sources. Besides, an integrated energy system, linking different energy carriers, infrastructures and consumption sectors in the EU, will be set to deliver climate neutrality by 2050 in a cost effective way. The increased value of flexibility will offer competitive opportunities for process industries (additional revenue streams) and enable a leaner energy system.

Process flexibility and efficient energy storage are essential to account for the variable renewable energy production. When less energy is available, process industries can consume less energy or take it from storage; whereas, when there is surplus of energy, the excess energy can be consumed or stored. A fast response rate, i.e., a swift increase or decrease of the process energy consumption, is key in the shift to dynamic operating processes. To support the change of energy supply, current processes, designed to run continuously at maximum capacity, have to be adapted. Besides, energy efficiency measures will help decreasing the overall process energy demand. To leverage the flexibility in process industries, digital process control systems that optimise the process while accounting for the value of flexibility need to be implemented.

Digital tools need to be developed to attain the energy flexibility of the process, but also to exchange data with network operators and flexibility markets (through market operators, suppliers and/or aggregators), which will enable industries to provide flexibility services. Powerful digital twins based on suitable combinations of analytical models, physics-based AI or pure AI solutions need to be designed and applied. To find optimal control solutions in a minimal time, digital twins could be empowered, for example, by multi-agent systems technologies.

Moreover, the direct integration of renewable energy generation and the higher overall efficiencies will require further flexibility solutions in process industries. Onsite energy storage or conversion in the form of electricity, heat or other energy vectors can further increase an installation’s flexibility.

Proposals should address the following aspects:

In an existing process, identification of potential flexibility that allows an efficient and competitive operation;Redesign and modification of the process to enable more flexibility in operation (e.g. process that can run faster or slower depending on the needs of the grid) or the shift from batch processes to continuous processes, etc., including the removal or adaptation of process steps that limit the flexibility;Redesign and modification of the process to increase its flexibility response rate (e.g., faster ramp up or ramp down) towards a higher energy efficiency at subsystem level;Development or redesign of digital process control systems, including, e.g., digital twins with integrated multi-agent systems, etc., supported by smart sensors and integrated analytical tools, to realise the flexibility of the process and to create connections to grid integration platforms;Evaluation of the potential use of onsite energy storage and conversion (electricity, heat, or other energy vectors) for the proposed flexible solution and integration of such energy solutions whenever relevant and feasible;Optimisation of the new process design at pilot scale. Proposals submitted under this topic should include a business case and exploitation strategy, as outlined in the introduction to this Destination. Additionally, proposals should include a safety assessment and a life cycle assessment for the implementation of the developed technologies; and a contribution to standardisation, wherever possible.

Proposals should include activities that specifically target the collaboration with other European projects on energy flexibility in their work plan (for example, a dedicated work package or task).

In order to achieve the expected outcomes, International Cooperation is encouraged, in particular with US and Canada.

This topic implements the co-programmed European partnership Processes4Planet.

In this topic the integration of the gender dimension (sex and gender analysis) in research and innovation content is not a mandatory requirement.


Specific Topic Conditions:Activities are expected to start at TRL 5 and achieve TRL 7 by the end of the project – see General Annex B.




Cross-cutting Priorities:Co-programmed European PartnershipsInternational Cooperation


ver menos

Temáticas Obligatorias del proyecto: Temática principal:

Características del consorcio

Ámbito Europeo : La ayuda es de ámbito europeo, puede aplicar a esta linea cualquier empresa que forme parte de la Comunidad Europea.
Tipo y tamaño de organizaciones: El diseño de consorcio necesario para la tramitación de esta ayuda necesita de:

Características del Proyecto

Requisitos de diseño: Duración:
Requisitos técnicos: ExpectedOutcome:Projects are expected to contribute to the following outcomes: ExpectedOutcome:Projects are expected to contribute to the following outcomes:
¿Quieres ejemplos? Puedes consultar aquí los últimos proyectos conocidos financiados por esta línea, sus tecnologías, sus presupuestos y sus compañías.
Capítulos financiables: Los capítulos de gastos financiables para esta línea son:
Personnel costs.
Subcontracting costs.
Purchase costs.
Other cost categories.
Indirect costs.
Madurez tecnológica: La tramitación de esta ayuda requiere de un nivel tecnológico mínimo en el proyecto de TRL 6:. Representa un paso importante en demostrar la madurez de una tecnología. Se construye un prototipo de alta fidelidad que aborda adecuadamente las cuestiones críticas de escala, que opera en un entorno relevante, y que debe ser a su vez una buena representación del entorno operativo real. + info.
TRL esperado:

Características de la financiación

Intensidad de la ayuda: Sólo fondo perdido + info
Fondo perdido:
0% 25% 50% 75% 100%
Para el presupuesto subvencionable la intensidad de la ayuda en formato fondo perdido podrá alcanzar desde un 70% hasta un 100%.
The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities. The funding rate for IA projects is 70 % for profit-making legal entities and 100 % for non-profit legal entities.
Garantías:
No exige Garantías
No existen condiciones financieras para el beneficiario.

Información adicional de la convocatoria

Efecto incentivador: Esta ayuda no tiene efecto incentivador. + info.
Respuesta Organismo: Se calcula que aproximadamente, la respuesta del organismo una vez tramitada la ayuda es de:
Meses de respuesta:
Muy Competitiva:
No Competitiva Competitiva Muy Competitiva
No conocemos el presupuesto total de la línea
Minimis: Esta línea de financiación NO considera una “ayuda de minimis”. Puedes consultar la normativa aquí.

Otras ventajas

Sello PYME: Tramitar esta ayuda con éxito permite conseguir el sello de calidad de “sello pyme innovadora”. Que permite ciertas ventajas fiscales.