Descripción del proyecto
Sustainability in coatings covers aspects related to energy and resource conservation, waste minimization or efficiency and the use of renewable and non-toxic products. The coatings industry has been driven by regulatory issues to diminish the content of volatile organic compounds to improve indoor and outdoor air quality, shifting from solvent borne systems (still the preferred choice globally) to waterborne ones. However, even in the case of products labelled as environmentally friendly their bio-based content is usually small (up to 30-40%). The challenge is to substitute fossil-based resins maintaining at least the same performance. New bio-based value chains are necessary. Lignin is an underutilized product with a high potential to provide not only economic returns, but also environmental benefits if value-added applications are found. Although lignin is a topic of great interest, the conversion of lignocellulosic biomass into real products is not trivial and still no commercial options are available. LIGNICOAT proposal provides new synthetic routes to obtain bioresins à la carte (PUD, ALKYD and EPOXY) based on lignin intermediates (Polyols, Epoxies, phosphorylated, polyacids and carbonates) for application in coatings and validated in an industrial relevant environment (TRL5). The target is not only to increase the biobased content and ensure performance, but also take advantage of lignin specific characteristics, to develop bioadditives (enzymes, chitosan, sugars, …), increasing the biocontent and providing anticorrosive, fireproof and antimicrobial/antiviral features in high-volume market case studies. Depending on the intermediates and the resins used, the estimated biocontent of the coatings will vary between 60-90%. A multidisciplinary and complementary consortium consists in 9 industrial partners BARPIMO, VENCOREX, AEP, WESTLAKE, FORESA, BRS, IRIS, ECOAT and AXIA and 4 RTOs, TECNALIA, VITO, VTT, NORCE and ARDITEC.