SIOMO
Financiado
SIlicon Optomechanical optoellectronic Microwave Oscillator
High-quality microwave sources are required in multiple applications (radar, wireless networks, satellites, etc.). Typically, low-noise microwave oscillators are made by applying frequency multiplication to an electronic source. T...
High-quality microwave sources are required in multiple applications (radar, wireless networks, satellites, etc.). Typically, low-noise microwave oscillators are made by applying frequency multiplication to an electronic source. This requires a cascade of frequency-doubling stages, which strongly reduces the power of the final signal. Recently, different techniques to produce microwave tones via optical means have been proposed. The resulting device is an optoelectronic oscillator (OEO), with many advantages with respect to its electronic counterparts (immunity to EM interference, low weight, compactness, long-distance transport, etc).
In the FET-Open project PHENOMEN, partner UPV designed and demonstrated a novel optomechanical cavity on a silicon chip displaying, for the first time, a localized mechanical mode at frequencies around 4 GHz within a full phononic bandgap and with a large OM coupling rate. By pumping the cavity with a blue-detuned laser, a high-Q microwave tone at f = 3.874 GHz is created at driving power of the order of 1mW. The noise figure of this OEO becomes as low as -101 dBc/Hz at 100 kHz, which is a remarkable good value for an OEO oscillating at GHz frequencies without any feedback mechanism. In addition, stronger pumping of the cavity enables the generation of multiple harmonics, thus reaching microwave frequencies above 10 GHz. Therefore, with the advantages of extreme compactness and Silicon-technology compatibility, this approach is a very promising candidate to build ultraweight OEOs, highly appropriate for space applications. Notably, the use of photonic technologies in space is one of the main activities of partner DAS.
SIOMO aims at turning a silicon-photonics optoelectronic oscillator based on cavity optomechanics - recently demonstrated in the FET-Open project PHENOMEN by partner UPV - into a genuine economic innovation by addressing its technological transfer to the space sector via partner DAS.
ver más
Duración del proyecto: 19 meses
Fecha Inicio: 2020-04-06
Fecha Fin: 2021-11-30
Fecha Fin: 2021-11-30
Línea de financiación: concedida
El organismo H2020 notifico la concesión del proyecto el día 2021-11-30
Línea de financiación objetivo
El proyecto se financió a través de la siguiente ayuda:
FETOPEN-03-2018-2019-2020:
FET Innovation Launchpad
Cerrada
hace 6 años
Presupuesto
El presupuesto total del proyecto asciende a
100K€
Líder del proyecto
UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Es la prestacion del servicio publico de la educacion superior mediante la docencia, el estudio y la investigacion. son funciones de la univ...
Total investigadores
683
Total investigadores
683