Innovating Works

CATACOAT

Financiado
Nanostructured catalyst overcoats for renewable chemical production from biomass
In the CATACOAT project, we will develop layer-by-layer solution-processed catalyst overcoating methods, which will result in catalysts that have both targeted and broad impacts. We will produce highly active, stable and selective... In the CATACOAT project, we will develop layer-by-layer solution-processed catalyst overcoating methods, which will result in catalysts that have both targeted and broad impacts. We will produce highly active, stable and selective catalysts for the upgrading of lignin – the largest natural source of aromatic chemicals – into commodity chemicals, which will have an important targeted impact. The broader impact of our work will lie in the production of catalytic materials with unprecedented control over the active site architecture. There is an urgent need to provide these cheap, stable, selective, and highly active catalysts for renewable molecule production. Thanks to its availability and relatively low cost, lignocellulosic biomass is an attractive source of renewable carbon. However, unlike petroleum, biomass-derived molecules are highly oxygenated, and often produced in dilute-aqueous streams. Heterogeneous catalysts – the workhorses of the petrochemical industry – are sensitive to water and contain many metals that easily sinter and leach in liquid-phase conditions. The production of renewable chemicals from biomass, especially valuable aromatics, often requires expensive platinum group metals and suffers from low selectivity. Catalyst overcoating presents a potential solution to this problem. Recent breakthroughs using catalyst overcoating with atomic layer deposition (ALD) showed that base metal catalysts can be stabilized against sintering and leaching in liquid phase conditions. However, ALD creates dramatic drops in activity due to excessive coverage, and forms an overcoat that cannot be tuned. Our materials will feature the controlled placement of metal sites (including single atoms), several oxide sites, and even molecular imprints with sub-nanometer precision within highly accessible nanocavities. We anticipate that such materials will create unprecedented opportunities for reducing cost and increasing sustainability in the chemical industry and beyond. ver más
30/09/2023
EPFL
2M€
Duración del proyecto: 72 meses Fecha Inicio: 2017-09-11
Fecha Fin: 2023-09-30

Línea de financiación: concedida

El organismo H2020 notifico la concesión del proyecto el día 2023-09-30
Línea de financiación objetivo El proyecto se financió a través de la siguiente ayuda:
ERC-2017-STG: ERC Starting Grant
Cerrada hace 8 años
Presupuesto El presupuesto total del proyecto asciende a 2M€
Líder del proyecto
ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE No se ha especificado una descripción o un objeto social para esta compañía.
Perfil tecnológico TRL 4-5