Hola,
¿eres nuevo aquí?

Regístrate gratis y conecta tu empresa con financiación pública, partners y proyectos.

Tengo cuenta

Regístrate

Ver video

MICRO-IMU

Financiado

Cerrado

MEMS Accelerometer Miniaturisation of the analogue electronics in an Application...

MEMS Accelerometer Miniaturisation of the analogue electronics in an Application Specific Circuit ASIC Very small inertial measurement units (IMU) are necessary for measuring the aircraft wing deformation during flight. This objective can be only met, if the sensor system is highly integrated. GEMAC and AMAC will develop in the pro... ver más

31/12/2016

Líder desconocido

793K€

Presupuesto del proyecto: 793K€

Líder del proyecto Líder desconocido

Fecha límite participación Sin fecha límite de participación.

Financiación concedida El organismo FP7 notifico la concesión del proyecto el día 2016-12-31 No tenemos la información de la convocatoria

0% 75% 100%

Características del participante

Este proyecto no cuenta con búsquedas de partenariado abiertas en este momento.

Información adicional privada

No hay información privada compartida para este proyecto. Habla con el coordinador.

1 Participantes

GEMAC - GESELLSCHAFT FUR MIK...

Conecta tu I+D

¿Tienes un proyecto y buscas un partner? Gracias a nuestro motor inteligente podemos recomendarte los mejores socios y ponerte en contacto con ellos. Te lo explicamos en este video

Líder del proyecto Líder desconocido

Presupuesto del proyecto 793K€

Fecha límite de participación Sin fecha límite de participación.

Descripción del proyecto Very small inertial measurement units (IMU) are necessary for measuring the aircraft wing deformation during flight. This objective can be only met, if the sensor system is highly integrated. GEMAC and AMAC will develop in the project an ASIC in which all necessary analog blocks are implemented (high performance switches, charge amplifier, temperature probe, gain and offset, ADC, eventually voltage reference). The first development step is the analysis of the specification and the existing mock-up to investigate and to confirm the feasibility of ASIC integration, to evaluate risks and to setup the detailed planning. In this phase, GEMAC needs continuous support from the consortium partner Sagem. After a Go-Ahead decision the final system architecture will be defined, followed by the design and simulation of the single blocks and the whole system including the interfaces to the MEMS element and the surrounding system electronics. Mentor tools will be used for all simulations in the design flow. In order to minimise risks and to save time the first run will cover only the main components of the system. The designed and checked layout will be transferred for preparation to XFAB. The company is one of the leading semiconductor and ASIC manufacturers in Europe and offers all state-of-the-art technologies for analogue, digital, mixed signal designs. GEMAC has business contacts to this fab for many years, all necessary libraries are available. After delivery the ASIC samples will be tested together with Sagem. In the result, a list of necessary redesign activities will be setup. In parallel the design will be completed with the still missing functional blocks. After successful simulation of back-annotated netlists the second run will start. The samples supplied by XFAB will be tested again together with Sagem. GEMAC and AMAC are R&D oriented SMEs with experiences in ASIC design and microsystem technology as well as MEMS based acceleration sensors for many years. AMAC is a spin-off of GEMAC and has taken over the Micro-IMU project in March 2016. With its participation in Clean Sky the companies intend to contribute to the goal of Clean Sky to speed up new and greener aviation designs to protect our environment.

Conecta tu I+D

Entra hoy

Forgot your password?

Financiación

Empresas

CTIs/Universidades

Proyectos

Investigadores