Hola,
¿eres nuevo aquí?

Regístrate gratis y conecta tu empresa con financiación pública, partners y proyectos.

Tengo cuenta

Regístrate

Ver video

ALT

Financiado

Cerrado

Formulation and characterization of new aluminium alloys produced by ingot metal...

Formulation and characterization of new aluminium alloys produced by ingot metallurgy for high temperature applications 250 C "The main objective of the project is to develop a new aluminium wrought alloy that can work at temperatures in the range of 200-250ºC for aeronautical applications such as regulator valves or actuator bodies for air treatment sys... ver más

30/04/2014

TECNALIA

440K€

Presupuesto del proyecto: 440K€

Líder del proyecto

FUNDACION TECNALIA RESEARCH & INNOVATION No se ha especificado una descripción o un objeto social para esta compañía.

TRL 2-3 | 123M€

Fecha límite participación Sin fecha límite de participación.

Ver 3 Participantes

Financiación concedida El organismo FP7 notifico la concesión del proyecto el día 2014-04-30 No tenemos la información de la convocatoria

0% 71% 100%

Información adicional privada

No hay información privada compartida para este proyecto. Habla con el coordinador.

3 Participantes

TECNALIA

0.00€ | Lider

REFIAL

N.D. | Participante

INATEC

N.D. | Participante

Conecta tu I+D

¿Tienes un proyecto y buscas un partner? Gracias a nuestro motor inteligente podemos recomendarte los mejores socios y ponerte en contacto con ellos. Te lo explicamos en este video

Proyectos interesantes

HiTNiFo Development of an advanced design and production process of... 455K€ Cerrado

NECTAR New Generation of NiAl Based Eutectic Composites with Tuneab... 100K€ Cerrado

DAFNE Development of gamma TiAl forgings in a low cost near conven... 640K€ Cerrado

RECYCAL High Shear Processing of Recycled Aluminium Scrap for Manufa... 3M€ Cerrado

MAT2012-36421 ALEACIONES CON MEMORIA DE FORMA (SMA) PARA CONDICIONES EXTRE... 246K€ Cerrado

MAT2013-48483-C2-1-P ESTUDIO DE MATERIALES DE BASE ALUMINIO REFORZADOS DE MANERA... 30K€ Cerrado

Líder del proyecto

FUNDACION TECNALIA RESEARCH & INNOVATION No se ha especificado una descripción o un objeto social para esta compañía.

TRL 2-3 | 123M€

Presupuesto del proyecto 440K€

Fecha límite de participación Sin fecha límite de participación.

Descripción del proyecto "The main objective of the project is to develop a new aluminium wrought alloy that can work at temperatures in the range of 200-250ºC for aeronautical applications such as regulator valves or actuator bodies for air treatment systems. Several heat resistant aluminium based materials have already been developed in the last years that might be applied for such high temperature applications. Notwithstanding, these are either too expensive or present additional technical drawbacks such as insufficient ductility, segregation of components, low machinability or recycling problems. The present project aims at developing new alloys through a methodology based on the identification of the effect of up to 12 alloying elements and their combinations in the heat resistance of wrought alloys through the Taguchi methodology. This is based on the selection of critical parameters through design of experiment techniques that minimise the time and resources to be employed in the process. Two orthogonal matrices are to be used, a L16 matrix and a modified L8 matrix. The former employs two levels that are related to the maximum and minimum amounts of the alloying element. The modified matrix incorporates intermediate values. In a first stage gravity casting samples with 24 different formulations are cast by gravity casting and preliminarily tested in order to check whether any of these combinations may reach the established specifications Subsequently, the most promising 2 alloys would be further developed. Researchers belonging to the non ferrous metallic materials and characterization departments of Tecnalia will lead the project. Their work will be complemented by the researchers at Fundación Inatec, a research institution that is part of the Otua industrial group related to recycling and recovery of metals and Refial, a company devoted to the production of aluminium alloys. They will be responsible of the cost analysis issues, environmental aspects and industrialisation aspects."

Conecta tu I+D

Entra hoy

¿Olvidé mi contraseña?

Financiación

Empresas

CTIs/Universidades

Proyectos

Investigadores