EJEMOD
Financiado
Engine bleed JEt pumps continuous behaviour MODelization
EJEMOD project focuses on the study of the physics and operation of new ejector prototypes proposed by the Topic Manager. The main objective of the project is to acquire knowledge on the functioning of these jet pumps, both in the...
EJEMOD project focuses on the study of the physics and operation of new ejector prototypes proposed by the Topic Manager. The main objective of the project is to acquire knowledge on the functioning of these jet pumps, both in their steady (on and off-design modes) and transient behaviour (transition between operating points by a change of boundary conditions). The wide working range analysed and the focus on the transitional phases will serve to acquire knowledge and transfer it into accurate and robust Dymola libraries, applicable (for various purposes) to the modelling of ejector devices whose function is also different to those previously described. Hence, the specific objectives of EJEMOD are the following:
• Perform a CFD analysis of the proposed ejectors, studying all the on-design and off-design modes indicated by the Topic Manager. The analysis will be performed by means of steady-state simulations (WP 1.1) covering on-design (double choked) and off-design (single choked or no-choked) operation. Moreover, a transient model will be employed to analyse in detail transition between two operating points (WP 2.1). Both steady-state and transient CFD models will be validated by comparison with experimental results.
• Perform the experimental testing of the ejectors, following a design of experiments (DoE) approach which covers the operational envelope indicated by the Topic Manager. Testing will be carried out in static conditions (WP 2.1), by setting primary and secondary pressure and temperatures, as well as back-pressure and in time-varying conditions (WP 2.2), by setting time-dependent functions for primary, secondary and back-pressure.
• Development and validation of 0D-1D numerical models on the Dymola platform for the simulation of ejectors, to be used in both static (Development WP 1.3, Validation WP 3.1) and dynamic scenarios (Development WP 2.3, Validation WP 3.2). Surrogate modelling methodologies based on deep learning architectures will be used.
ver más
Duración del proyecto: 27 meses
Fecha Inicio: 2020-12-09
Fecha Fin: 2023-03-31
Fecha Fin: 2023-03-31
Línea de financiación: concedida
El organismo H2020 notifico la concesión del proyecto el día 2023-03-31
Línea de financiación objetivo
El proyecto se financió a través de la siguiente ayuda:
Presupuesto
El presupuesto total del proyecto asciende a
696K€
Líder del proyecto
Universidad Politécnica de Cataluña
No se ha especificado una descripción o un objeto social para esta compañía.
Total investigadores
9
Total investigadores
9
238.66K€ |
Participante