Development of novel Non Destructive Testing NDT techniques and autonomous rob...
Development of novel Non Destructive Testing NDT techniques and autonomous robots to be deployed by Remote Operating Vehicles for the sub sea inspection of offshore structure welds DEMOnstration
The SubCTest Demo project, a continuation of the FP7 R4S SubCTest project, has the objective to successfully demonstrate a robust NDT system, deployed by a Remote Operating Vehicle (ROV), that will reliably detect and evaluate d...
ver más
¿Tienes un proyecto y buscas un partner? Gracias a nuestro motor inteligente podemos recomendarte los mejores socios y ponerte en contacto con ellos. Te lo explicamos en este video
Proyectos interesantes
SUBCTEST
Development of novel Non Destructive Testing NDT technique...
1M€
Cerrado
ICARUS
An ICT Enabled Approach to Optimising the Reliability of Man...
1M€
Cerrado
DiAAMond
Development of Non destructive Inspection Approaches for Aut...
475K€
Cerrado
CRO-INSPECT
Collaborative RObotic Solution for Advanced Inspection of Co...
352K€
Cerrado
ThermoBot
Autonomous robotic system for thermo graphic detection of cr...
4M€
Cerrado
HOGSKOLEN I OSTFOLD
No se ha especificado una descripción o un objeto social para esta compañía.
Presupuesto del proyecto
2M€
Fecha límite de participación
Sin fecha límite de participación.
Descripción del proyecto
The SubCTest Demo project, a continuation of the FP7 R4S SubCTest project, has the objective to successfully demonstrate a robust NDT system, deployed by a Remote Operating Vehicle (ROV), that will reliably detect and evaluate discontinuities in pipes, risers and tubular structural components, including the welds.
Long range ultrasonic testing (LRUT) will be used to detect, locate and qualitatively assess the indications over distances of tens of metres either side the test site. Ultrasonic testing using electro-magnetic techniques will be used to evaluate, size and quantitatively assess discontinuities detected by LRUT.
Validation of the scanning and clamping manipulator systems will be demonstrated and analysis of the achieved accuracy will be conducted. Validation procedures will test both the reliability and robustness of the NDT system within prescribed underwater pipes or structures.