LOPEMAT
Financiado
DEVELOPMENT OF LOW POWER EMAT INSTRUMENTATION FOR IN SERVICE CORROSION INSPECTIO...
DEVELOPMENT OF LOW POWER EMAT INSTRUMENTATION FOR IN SERVICE CORROSION INSPECTION AND MONITORING IN HIGH TEMPERATURE ASSETS
EMAT is an advanced couplant-free ultrasonic technology that overcomes the Achilles heel of conventional ultrasonic testing (UT), transferring energy from the probe into the material inspected. Unlike UT, EMAT does not require cou...
EMAT is an advanced couplant-free ultrasonic technology that overcomes the Achilles heel of conventional ultrasonic testing (UT), transferring energy from the probe into the material inspected. Unlike UT, EMAT does not require couplant nor direct contact with the target surface, making the technology ideal for field-use and automation.
The biggest drawback of this technology is its high-power consumption, which in turn leads to bulky instrumentation and higher pricing when compared to conventional ultrasonic devices. LOPEMAT project will tackle this challenge, paving the way to a new paradigm of ultrasonic inspection trough the development of the first line of Low-Power EMAT systems.
In line with the trend to make technology cheaper, lighter and more efficient, recent publications have shown it feasible to generate EMAT bursts with an excitation of 0.5 W and 4.5 Vpp, using a combination of advanced signal processing techniques such as binary quantization and coded excitation, whilst a typical high-power EMAT instrument such as Innerspec’s PowerBox H, works with 8000 W and 1200 Vpp, limiting its size, price range and portability.
A change so vast in power consumption would constitute a total gamechanger in the field, allowing for cheaper and lighter EMAT instruments, no bigger than a smartphone, that could be powered trough a power-bank or USB port, and could compete with conventional ultrasonic devices across the whole range of NDT applications.
Thus, the main goal of the LOPEMAT project is to develop and validate a first working prototype of low-power EMAT system for normal beam and guided wave generation.
ver más
Duración del proyecto: 12 meses
Fecha Inicio: 2020-08-31
Fecha Fin: 2021-09-06
Fecha Fin: 2021-09-06
Línea de financiación: concedida
El organismo H2020 notifico la concesión del proyecto el día 2021-09-06
Línea de financiación objetivo
El proyecto se financió a través de la siguiente ayuda:
INNOSUP-02-2019-2020:
European SME innovation Associate - pilot
Cerrada
hace 5 años
Presupuesto
El presupuesto total del proyecto asciende a
80K€
Líder del proyecto
INNERSPEC TECHNOLOGIES EUROPE
Diseio, fabricacion y comercializacion de equipos de ultrasonidos para ensayos no destructivos, incluyendo el servicio tecnico. el objeto so...
Perfil tecnológico
TRL
4-5
438K
Perfil tecnológico
TRL
4-5
438K