Hola,
¿eres nuevo aquí?

Regístrate gratis y conecta tu empresa con financiación pública, partners y proyectos.

Tengo cuenta

Regístrate

Ver video

ARMLIGHT

Financiado

Cerrado

Design development and manufacturing of an electro mechanical actuator and tes...

Design development and manufacturing of an electro mechanical actuator and test rig for AiRcrafts Main LandIng Gear acTuation systems. "The ARMLIGhT project will design, manufacture, tune and validate an innovative and smart Electro-Mechanical Actuator for the study and validation of a future complete all-electric landing gear actuation system. ARMLIGhT actuator... ver más

30/06/2016

COMPANIA ESPANOLA...

748K€

Presupuesto del proyecto: 748K€

Líder del proyecto

COMPANIA ESPANOLA DE SISTEMAS AERONAUTICOS Diseno, desarrollo, fabricacion, montaje y venta de equipos y accesorios para la industria aeroespacial.

TRL 4-5 | 8M€

Fecha límite participación Sin fecha límite de participación.

Ver 2 Participantes

Financiación concedida El organismo FP7 notifico la concesión del proyecto el día 2016-06-30 No tenemos la información de la convocatoria

0% 63% 100%

Información adicional privada

No hay información privada compartida para este proyecto. Habla con el coordinador.

2 Participantes

COMPANIA ESPANOLA DE SISTEMA...

0.00€ | Lider

TECNALIA

N.D. | Participante

Conecta tu I+D

¿Tienes un proyecto y buscas un partner? Gracias a nuestro motor inteligente podemos recomendarte los mejores socios y ponerte en contacto con ellos. Te lo explicamos en este video

Proyectos interesantes

FLIGHT-EMA (E-RUDDER) Advanced Flight control system Design Development and Manu... 1M€ Cerrado

EMA4FLIGHT Development of Electromechanical Actuators and Electronic co... 2M€ Cerrado

VALEMA VALidation tests of ElectroMechanical Actuators and its dedi... 1M€ Cerrado

E-BRAKE Design Manufacturing and Qualification up to TRL5 of Innova... 1M€ Cerrado

AMuLET Advanced Control Unit for Morphing Leading Edge Management 623K€ Cerrado

FASE-LAG FAil Safe Electro mechanical actuation for LAnding Gear 997K€ Cerrado

Líder del proyecto

COMPANIA ESPANOLA DE SISTEMAS AERONAUTICOS Diseno, desarrollo, fabricacion, montaje y venta de equipos y accesorios para la industria aeroespacial.

TRL 4-5 | 8M€

Presupuesto del proyecto 748K€

Fecha límite de participación Sin fecha límite de participación.

Descripción del proyecto "The ARMLIGhT project will design, manufacture, tune and validate an innovative and smart Electro-Mechanical Actuator for the study and validation of a future complete all-electric landing gear actuation system. ARMLIGhT actuator will be based on a modular and efficient approach that will integrate easily exchangeable electric and mechanical components with sensors and control strategies that will allow automatic and autonomous safety control. The ARMLIGhT Electro-Mechanical Actuator will include its dedicated Electronic Control Unit, a Built In Test equipment to detect potential failures and a disable device to guarantee compatibility with emergency actuation. Different configurations will be studied and evaluated to determine the optimum system architecture from a technical point of view. Volume, mass, electrical consumption, power to mass ratio, reliability, durability and safety are concepts that will drive the development. The ARMLIGhT system will be tested and validated at several stages: Virtual validation at model level and finally actual experimental validations of the complete system through both on-ground and in-flight test campaigns. These sequential and complementary validations will assure thus a reliable, safe and efficient performance of the prototype and will provide data for a deep concept evaluation. For this validation purpose, the ARMLIGhT project will also design, manufacture and tune a Test Rig for ARMLIGhT Electro-Mechanical Actuator validation. ARMLIGhT Test Rig will allow installation both in Copper Bird® and in the ATR (Avions de Transport Regional) passenger cabin. The test bench will also include its own control system, inertia load simulation of the Main Landing Gear involved weight and counter-load actuator with its hydraulic and electric power supply systems."

Conecta tu I+D

Entra hoy

¿Olvidé mi contraseña?

Financiación

Empresas

CTIs/Universidades

Proyectos

Investigadores