Innovating Works

FLUIDCELL

Financiado
Advanced m-CHP fuel CELL system based on a novel bio-ethanol Fluidized bed membr...
Advanced m-CHP fuel CELL system based on a novel bio-ethanol Fluidized bed membrane reformer FLUIDCELL aims the Proof of Concept of an advanced high performance, cost effective bio-ethanol m-CHP FC system for decentralized off-grid, by improving technology developments from previous EU projects. The improvements will be a... FLUIDCELL aims the Proof of Concept of an advanced high performance, cost effective bio-ethanol m-CHP FC system for decentralized off-grid, by improving technology developments from previous EU projects. The improvements will be achieved by development of a) better system integration using a fluidized bed catalytic membrane reactor working at low temperature (<500°C) b)innovative materials;Pd pore filled (PdPF) membrane, low temperature autothermal ethanol steam reforming (AESR) catalysits and c) most advance FC technologies. Low temperature allows lower thermal duty, higher compactness, use of less expensive materials and long term stability.The H2 is produced from bioethanol which is non-toxic, high energy density, easy handling fuel which can be obtained from cellulose or lignocellulose. Compared with standard AESR, the use of a membrane reactor allows operating at lower temperatures while also suppressing the methane formation via the in-situ recovery of H2. The fluidized bed system allows operating at a virtually uniform temperature which is beneficial in terms of both membrane stability and durability and for the reaction selectivity and yield; since the possible carbonaceous depositions are better exposed to contact with steam and, therefore, faster gasified; in addition, the feedstock is in contact with all the catalyst particles and the fluxes and temperatures are homogeneous, avoiding any polarization phenomena along the membrane.The use of the H2-selective Pd membrane, as proposed in FluidCELL, can circumvent the constraint of high temperatures by shifting the equilibriums, allowing higher H2 yield at much lower temperatures. Besides, the possible detrimental erosion of the membrane produced by fluidized bed will be diminished by considering the use of PdPF membranes where Pd is located inside the nanopores of a ceramic support located below a ceramic protecting layer; this innovative membrane will be for the first time used in fluidized bed reactors. ver más
30/04/2018
TECNALIA
4M€
Perfil tecnológico estimado
Duración del proyecto: 48 meses Fecha Inicio: 2014-04-01
Fecha Fin: 2018-04-30

Línea de financiación: concedida

El organismo FP6 notifico la concesión del proyecto el día 2018-04-30
Presupuesto El presupuesto total del proyecto asciende a 4M€
Líder del proyecto
FUNDACION TECNALIA RESEARCH & INNOVATION No se ha especificado una descripción o un objeto social para esta compañía.
Perfil tecnológico TRL 2-3 123M